• A posterior fusion of the ribs was suspected by 3d ultrasound.

    三维超声怀疑肋骨后方融合。

    youdao

  • The melt flow phenomenon of flat spiral type die had been studied by 3d numerical simulation.

    对吹塑薄膜平面螺旋式模头内熔体流动现象进行了三维数值模拟。

    youdao

  • New benzimidazole molecules with excellent corrosion inhibition properties were designed by 3d-qsar contour maps.

    通过3d - QSAR等势图设计出了几种具有较好缓蚀性能的苯并咪唑化合物。

    youdao

  • In this paper, we calculate and analyze the strength of the hold frame of a 30000 DWT multipurpose ship by 3d F. e.

    本文对30000吨多用途船船体舱段强度进行了有限元直接计算分析。

    youdao

  • All parts of the basket are modeled by 3d elements, which can easily simulate complicated structures and boundary conditions.

    由于此方法对转鼓全部采用三维立体单元进行网格划分,因而可以模拟复杂的局部结构和边界条件。

    youdao

  • However, measurement system can not link with 3d CAD system directly because the measured dense scattered data can not be processed effectively by 3d CAD software.

    然而测量系统和三维CAD系统之间无法直接结合,因为测量得到的数据是海量散乱点,三维CAD无法对之进行高效处理。

    youdao

  • Therefore, the deposition cycles and track sequence interfaces distinguished by 3d wavelet time frequency analysis method can be used to determine reservoir areas.

    利用小波三维时频分析方法划分的沉积旋回和物性变化规律可以进行层序界面追踪,并进一步确定储层范围。

    youdao

  • Conclusion: Circumferential pulmonary vein linear ablation guided by 3d mapping system (CARTO system) was safe and effective for paroxysmal atrial fibrillation therapy.

    结论:三维标测系统指引导管环肺静脉线性消融治疗阵发性心房颤动疗效高,安全性好。

    youdao

  • Objective: TO investigate the safety and efficacy of circumferential pulmonary vein linear ablation guided by 3d mapping system (CARTO) in patients with atrial fibrillation.

    目的:评价三维标测系统(CARTO)指导下心房颤动导管射频消融治疗的疗效和安全性。

    youdao

  • Objective: to display the disposition of human fascia concentration by 3d reconstruction, and to explore the morphosis of Jin-Muo by comparing 3-d models with images of Jin-Muo.

    目的:利用三维重建的方法显示人体筋膜聚集区分布,与经络图对比研究经络形态结构。

    youdao

  • Airproof connections in oil circulation, air exhaust at initial installation and filter change, as well as the improvement of configuration layout by 3d visual design are also discussed.

    讨论了油路连接密封、初装和更换滤芯时的排气措施以及通过三维可视化设计改善机箱布局等问题。

    youdao

  • On the basis of state of Heshangqiao Iron Mine, the 3d modeling researching ore body by 3d grid data structure and some technologies and methods used in ore reserves calculation were reviewed.

    结合和尚桥铁矿实际,对应用三维栅格数据结构研究矿床的三维建模和储量计算中涉及的若干技术和方法进行了评述。

    youdao

  • The way they are building the houses is unusual—by 3D-printing technology.

    他们建造房屋的方式与众不同——使用 3D 打印技术。

    youdao

  • Our life will be influenced greatly by 3D printing technology in a few years.

    再过几年,3D 打印技术将极大地影响我们的生活。

    youdao

  • Icon has developed a way to build houses carefully by 3D-printing them with concrete.

    Icon已经开发出一种用混凝土 3D 打印房屋的方法。

    youdao

  • The experimental results which agreed well with calculated results by 3D finite element method verified the validity of the analyses.

    实测交直轴电感与三维有限元分析结果吻合较好,验证了分析的正确性。

    youdao

  • A company in Shanghai has produced 15 mobile rooms within 24 hours by 3D printing technology and sent them to Hubei for patients to live in.

    上海的一家公司利用 3D 打印技术在24小时内生产出15间移动病房,并将其送往湖北供患者居住。

    youdao

  • The noise attenuation characteristics of complex muffler are investigated by 3D finite element analysis based on the study on simple muffler.

    在利用三维有限元法研究简单结构的消声器的声学消声性能基础上,对于复杂结构的消声器进行了声学性能预测。

    youdao

  • Conditions for formation of nanostrustured disperse deposits and surface rough-ness was determined by 3D SEM reconstruction of the specimen surface.

    对试样表面进行3D环境扫描电镜重建,确定了纳米弥散镀层的形成条件和表面粗糙度。

    youdao

  • Work behavior of composite foundation of cemented soil pile is studied by 3D non-linear FEM analysis applying post-peak softening model of cemented soil.

    考虑水泥土峰值后软化性能对水泥土桩复合地基性能进行了三维非线性有限元分析。

    youdao

  • After the model is divided into elements by 3D brick unit and input the material parameters, the solution will be done under the restrain conditions and loads.

    对物理模型进行了三维有限元网格划分,配备材料特性参数,选用三维块状单元进行有限元计算分析,得到在外力作用下的应力分布和其它相关结果。

    youdao

  • OBJECTIVE:To evaluate the clinical value of hyperfractionated external irradiation followed by 3D conformal radiation therapy boost to recurrent NPC after primary radiotherapy.

    目的:初步评价超分割外照射加立体定向适形放射剂量治疗局部复发鼻咽癌的临床疗效及毒副反应。

    youdao

  • The multi-port-element network method is a new unitive modeling of system-level. The fast design and simulation of MEMS devices can be achieved by 3D multi-port-elements library.

    多端口组件网络方法是一种新的系统级统一建模方法,通过该方法形成的多端口三维组建库可以实现MEMS器件的快速设计与仿真。

    youdao

  • The 3D structure of the tissue can be realistically displayed on computer CRT by 3D ultrasonic reconstruction system, which processes traditional two-dimensional (2D) ultrasonic images.

    将传统的二维断层图像用三维超声重建系统进行处理,能在计算机屏幕上形象逼真地显示人体器官和组织的立体视图。

    youdao

  • In the US, exoskeleton is produced by 3D printing technology to improve the movement capable of disabled children. A two-year-old girl for the first time is able to raise her arms for play.

    医疗器械的定制化需求是3D打印的优势所在,美国借助3D技术打印外骨骼,帮助残疾儿童提高行动能力,让一名两岁女童首次抬起手臂玩耍。

    youdao

  • The time-variable stiffness is acquired by 3D finite element contact procedure, while the exciting force caused by meshing shock is obtained by 3D dynamic contact finite element mixed formula.

    时变刚度曲线用轮齿三维接触有限元方法求得,啮合冲击激励力用轮齿三维冲击-动力接触有限元混合法求得。

    youdao

  • MR-DSA failed to depict 1 intranidal aneurysm and missed 1 less dilated artery and draining vein after embolization respectively, which were demonstrated clearly by 3D-CEMRA confirmed with DSA.

    与DSA相比,MR-DSA没有显示瘤巢内动脉瘤和栓塞后引流静脉及供血动脉直径变小各1例,而3D-CEMRA对此显示清晰。

    youdao

  • Then the variation of direct axis and quadrature axis inductances was obtained by 3D finite element method for the taper permanent magnet motor with the taper rotor at different axial locations.

    之后采用三维有限元方法求取了转子在不同轴向位置时电机的交直轴电感,得到了该种电机交直轴电感参数的变化规律;

    youdao

  • The ripple has been proved by 3D beam-wave interaction simulator(BWIS) module of microwave tube simulator suite(MTSS), which was developed by University of Electronic Science and Technology of China.

    利用电子科技大学编写的微波管模拟套装中的3维注-波互作用模块进行了静态轨迹计算,验证了理论推导。

    youdao

  • The ripple has been proved by 3D beam-wave interaction simulator(BWIS) module of microwave tube simulator suite(MTSS), which was developed by University of Electronic Science and Technology of China.

    利用电子科技大学编写的微波管模拟套装中的3维注-波互作用模块进行了静态轨迹计算,验证了理论推导。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定