By means of the bus protocol, the resource sharing technique is implemented.
利用该协议，“资源共享”技术得以实现。
DEI1016is a serial transceiver which can support ARINC429avigation bus protocol.
DEI1016是一种可支持ARINC 429航空总线协议的串行接收、发送器件。
The hardware design, bus protocol module division and its internal structure are introduced.
介绍该系统的硬件结构、总线协议的模块划分及其内部结构。
The EIB bus in smart building lighting system is studied and the EIB bus protocol is analyzed.
文章对楼宇智能照明系统中的EIB总线进行了研究，对EIB总线协议进行分析。
This paper was introduced all vehicles bus protocol and development of vehicles control system.
基于光电传感器的离散布置形式，介绍了一种智能汽车控制系统。
The design of the bus interface and bus protocol of the communication architecture was detailed then.
论文随后具体地介绍了总线接口的软硬件设计方法及总线协议的设计。
In this paper, the HJ-90 data bus protocol for shipboard distributed control system will be introduced.
本文介绍舰载实时分布式系统的总线控制协议，即HJ- 90总线协议。
This paper proposes that the mathematical model of Token Bus Protocol for LANs is a cyclic queueing system.
本文提出了令牌总线协议的数学模型——循环排队系统。
The dissertation introduces not only PCI bus protocol and PCI9054 in detail, but also the FPGA logic design.
FPGA作为控制核心，其逻辑程序设计也是本文重点介绍的对象。
RETHER is a timed-token-passing bus protocol based on Ethernet. It provides the real-time transfer performance.
RETHER是一种基于以太网的定时令牌总线协议，能够对数据传输提供实时性能。
Software design mainly includes the driver program design for the chips and CAN-BUS protocol and network protocol.
软件编程方面，主要是各芯片的驱动程序设计，以及CAN总线协议和网络协议的实现。
Based on the analysis of CAN bus protocol, this paper obtains upper limit of frames in a single CAN bus through calculating its busload.
文章从分析CAN总线协议入手，通过计算CAN总线的总线负载率，得出单个CAN总线传输报文帧的上限值。
It is introduced in this paper that a method to improve the real-time protocol based on Ethernet, referring to Profibus DP field-bus protocol.
对通讯协议以及以太网实时协议改进的研究是对工业自动化系统底层次融合问题的一种探讨。
HART field-bus protocol is used in output of system pressure or differential pressure transmitter, digital signals is transmitted with MODBUS via RS485.
系统压力或差压变送器信号输出采用HART现场总线协议，数字信号传输通过RS485进行MODBUS通讯。
Emphasize on analysing the features of CAN and the structure of the CAN bus protocol. Finally the NCS constituted by CAN bus and its time delay are analysed.
介绍了几种目前比较流行的现场总线，重点分析了CAN总线的性能特点和协议结构以及由CAN总线构成的网络控制系统及时延特性。
We study and analyze PCI bus protocol and apply PCI9050's interface chip to design the interface card of PCI bus and compile drive software of its interface card.
对PCI总线协议进行了分析和研究，采用PCI9050接口芯片设计了PCI总线接口卡，编写了接口卡的驱动程序。
The work of this dissertation is to complete the RTL design and verification of CLB-PVCI bus bridge after studying and analyzing the CLB bus protocol and PVCI protocol.
本论文工作就是在研究和分析CLB总线协议和PVCI协议的基础上，完成CLB - PVCI总线桥的RTL设计和验证。
IIC bus protocol analysis on the basis of a detailed description in the text adopted by the IIC module DM642 video decoder chip register configuration, calibration process.
在分析IIC总线协议的基础上，文中详细叙述了DM 642通过IIC模块对视频编解码芯片的寄存器进行配置、校验的流程。
The research puts forward the methods of solving the problems by analyzing the limitations which MIL-STD-1553 B data bus protocol possesses in high speed data communication.
通过对美国军用标准MIL-STD-1553B总线协议在高速数据通讯中受到限制的分析，提出了现实解决办法。
This paper based on the mechanism of DDR-SDRAM, gave a way to construct a DDR-SDRAM controller based on WISHBONE bus protocol, and also introduced a forecast method to improve DDR's performance.
SDRAM是当今一种流行的高速存储器。通过和普通sdram存储器对比，阐述了WISHBONE总线协议下ddr存储器控制器的设计方法和注意事项，并提出一种提高DDR工作效率的预测机制。
This paper introduces an optical fiber temperature measuring system, which supports a popular field bus protocol has a good capability of data communication and can be linked with control network.
介绍一种以微控制器、可编程外围芯片为核心构成的数字化、小型化光纤传感智能温控仪系统。
Product Mechanical Dimensions, external electrical signal, communication bus protocol and the standard memory card line, and currently on the market with memory card interface device is compatible.
产品机械尺寸、外部电气信号、通讯总线协议与标准的存储卡保持一致，与目前市场上的带有存储卡接口的终端设备兼容。
ARINC718A protocol is part of the ARINC429 bus protocol, which is mainly used to achieve definitions of data format and protocol specifications between the transponder and the data-linking processor.
ARINC 718a协议是ARINC 429总线协议的一部分，主要用来实现应答机和数据链路处理器之间的数据格式和通信规范的定义。
Now that we have explored how to setup a bus, and how to use JMS as a message protocol going across the bus, we are finally ready to introduce another key component into our solution: Mediations!
既然我们已经讨论了如何建立总线以及如何将JMS作为整个总线的消息协议，最后我们准备将另一个关键组件引入我们的解决方案中，这就是中介！
The bus provides many functions, including the core functions of protocol transformation, data transformation, and content - and context-based routing.
该总线可提供许多功能，其中包括协议转换、数据转换和基于内容和上下文路由的核心功能。
This includes the ability to access those resources using multiple protocols and APIs; a message can be sent into the bus over one protocol and be available to its consumer via another protocol.
这包括使用多重协议及API访问那些资源的能力；消息能够发送到协议上的总线并且经由另一个协议可以获得其消费者。
The Port Destination sends it to the bus Invoker module for the protocol being used (which is not exposed to users).
端口目的地将其发送到正在使用的协议的总线Invoker模块（没有公开给用户）。
For example, a message can be sent into the bus as a Web services request message based on the SOAP protocol over HTTP.
例如，在HTTP上消息能够作为基于SOAP协议的Web服务请求消息发送到总线上。
For example, a message can be sent into the bus as a Web services request message based on the SOAP protocol over HTTP.
例如，在HTTP上消息能够作为基于SOAP协议的Web服务请求消息发送到总线上。
应用推荐