The FSM model of target PCI bus interface controller is then provided based on PCI bus operation timing.
根据PCI总线操作时序，提出了从设备接口控制器的有限状态机模型。
PCI target interface controller design with FPGA is proposed. And the realization of the complication of the access sequence to the BUS interface controller is expressed by sequence state machine.
给出了一种基于FPGA实现PCI总线目标模块接口控制器的设计方案，用时序状态机来实现总线访问操作复杂的时序。
The batch controller also has a standard interface of RS-485 bus, preferably achieved the network design of the batch control system.
该配料控制器还配有标准的RS—485总线接口，较好地实现了配料控制系统的网络化设计。
As a network bridge, communication controller is the interface device which realize the function of communication between supervise PC and field bus.
总线控制器作为管理计算机与现场总线的接口装置，起到了管理计算机与智能仪表数据双向传输的网桥作用。
Generally speaking, the figures for RGB bus interface screen needs a controller to display properly, but this paper USES STM32 to design the digital screen with directly mounted RGB interface.
一般来说，对于RGB总线接口的数字屏都需要有控制器才能正常显示，但是本文利用STM 32处理器设计出了一种能直接挂载rgb接口数字屏的方法。
The design of the PCI bus in the interspaced ordonnance, and the realization of the sequence state machine in the PCI interface controller is given.
给出了PCI总线配置空间的设计以及PCI接口控制器中时序状态机的实现。
CAN-BUS interface adopts protocol control chip SJA1000 plus receiving and sending chip 82c250. Ethernet interface adopts Ethernet controller RTL8019AS as physical transmission media.
CAN总线接口采用协议控制芯片SJA1000，配以收发器82c250。以太网接口采用以太网控制器rtl 8019as作为物理层传输媒介。
Then detailed representations for CAN-BUS principle, CAN controller, CAN high-speed transceiver, and design project for CAN-BUS interface were given.
接下来对本系统所用到的CAN总线的原理、CAN控制器和CAN高速收发器进行了详细的介绍，并给出了CAN总线接口的设计方案。
Micro controller of MCS51, ATMEL89, 60hc05 series were widely applied, but they have no interface of I2C bus, the application of device for I2C bus interface in these systems were limited.
MCS51系列、ATMEL89系列、60hc05系列等单片机得到了广泛的应用，但它们均没有I2C总线接口，因此限制了在这些系统中使用具有I2C总线接口器件的应用。
In this article, to carry the 6-axis motion controller out, a method of using PCI special interface chip PCI9052 to be a interface bridge of PCI bus and DSP (TMS320LF2407), was introduced.
文章介绍了一种采用PCI专用接口芯片pci9052作为PCI总线与DSP (TMS320 LF 2407)的接口桥接器，实现6轴运动控制卡的硬件设计方法。
PDIUSBD12 may be used for implementing the interface between the parallel bus of the micro-controller and USB. With PDIUSBD12, users can implement multiple classes of USB functions.
PDIUSBD 12芯片能够实现微控制器的并行总线到总线的接口功能，使用芯片可以实现多种类型的外设。
Controller has RS-485, MODBUS standard field bus-bar communication interface and facilitate connect to switch board system.
控制器具有RS- 485,MODBUS标准现场总线通讯接口，方便接入只能开关柜系统。
And then it puts forward study on the high speed switch valve, using GMM as valve's core, adopting DSP as controller and designing bus communication interface.
在此基础上提出了以超磁致伸缩材料为阀芯，以DSP为控制器，带有总线型接口的高速开关阀的研究课题。
Difficulty of system Extending and transplant are found by means of PCI (Peripheral Component Interface) bus motion controller or PC (Programmable controller).
系统的扩展和移植难度发现的PCI(外设组件接口)总线运动控制器或PC(可编程控制器)的手段。
A boundary scan controller with the USB interface is designed. DSP and 74lvt8980 are adopted to control the boundary scan bus.
采用DSP和边界扫描总线控制芯片74lvt8980设计边界扫描测试控制器。
The application of CAN-bus not only decreases the quantities of link-lines and pins for controller interface, but also promotes the trend for the network of auto electronic apparatus.
它的应用不仅减少了汽车内线束的数量和控制器接口的引脚数，而且更为重要的是由此而引出了汽车电子器件的网络化趋势。
The application of CAN-bus not only decreases the quantities of link-lines and pins for controller interface, but also promotes the trend for the network of auto electronic apparatus.
它的应用不仅减少了汽车内线束的数量和控制器接口的引脚数，而且更为重要的是由此而引出了汽车电子器件的网络化趋势。
应用推荐