One kind of stepping motor control card based on ISA bus of PC which achieved multi-spindle linkage control is introduced, its principle and design of hardware construction and software are discussed.
介绍了一种基于PC机的IS A总线步进电机控制卡，实现多轴联动控制，讨论了其工作原理和硬件结构设计、软件设计。
In the section of hardware design, selection of the CAN bus communication interface card, design of CAN nodes and the signal acquisition system are introduced.
在其硬件设计中，着重介绍了CAN总线通讯接口卡的选择、CAN节点设计与信号采集系统设计。
This paper introduces the design of the hardware and the firmware of a boot card based on PCI bus.
本文介绍了一种基于PCI总线启动卡的硬件组成和固件的设计方法。
I think this is one of the bus IC card design negligence.
我觉得，这是公交IC卡的一个设计上的疏忽。
The design of step motor control card is based on DSP technique and PCI bus technique.
步进电机控制卡的设计采用了DSP技术和高速pci总线技术。
An physical approach of network security based on PCI bus is proposed, the design scheme of the core component, PCI control card, is introduced, and realization of some key technologies is described.
提出了基于PCI总线网络安全的一种物理实现方法，详细介绍了其核心部件PCI控制板卡的设计方案，并描述了其中几个关键技术的实现。
It mainly states the design of real-time image acquisition card based on PCI bus and development of WINDOWS driver programs for the card.
第四部分介绍了一种更易于实用化的联网系统，主要阐述了主机端基于PCI总线的实时图像采集卡的设计。
This paper introduces the design of GPIB communication card based on PCI bus.
介绍了一种基于PCI总线的GPIB总线通讯卡的设计方法。
The design of a multi - function extended card based on PC104 bus is presented.
介绍了一款PC 104总线多功能扩展卡设计。
The design of hardened high performance encryption card based on PCI local bus both resolves the speed bottleneck problem and it also can be used in other encryption processing.
对基于PCI总线插槽的硬件高速加密卡的设计，不但解决了速度瓶颈问题，同时也可用于其他加密应用处理。
In order to connect different computer systems into the CAN bus network, the design and implementation of a dual CAN interface card based on EPP port is introduced in this paper.
为使不同的计算机系统方便的接入CAN总线网络，提供了一种基于微机并行接口EPP方式的双CAN接口卡的设计方案。
The specialities of CAN bus are introduced. The design idea and realization method for the hard and soft ware of CAN communication card based on PCI bus are provided.
介绍了CAN总线的特点，给出了基于PCI总线的CAN通信卡的硬件、软件设计思路与实现方法。
And this paper brought forward one kind of design method on CAN BUS network Card Based on USB Interface in the measurement-control network of design.
在测控网络的设计中，提出了一种基于USB接口的CAN总线网络适配器的设计方案。
The paper introduces the design of interface converter card between PC and CAN bus.
文章介绍了一种PC与CAN总线之间进行通信的接口转换卡的设计。
The design combined the laser marking technology with PCI Local Bus in a laser marker controller card, which plays an important role in a computer controlled laser marker system.
本文完成了采用计算机控制模式的基于PCI总线的激光打标系统的控制卡设计。
This paper introduce the working principle and design program of the Error Code Display Card which is base on PC ISA bus.
介绍了基于微机IS A总线的微机故障代码显示卡的工作原理和设计方案。
This Pepeer presents the design and preparation of one kind of intelligent temperature card based on PC bus. The directions for use are given.
本文系统介绍了一种基于PC总线的智能型温度控制卡的构成及控制算法的建立过程，说明了控制卡的用途及用法。
This paper proposes a design of PCI bus high speed LVDS communication Card, which can be widely applied in high speed serial communication of PCI-based electrical systems.
本文提出了一种设计pci总线高速LVDS通信卡，可广泛应用于PCI - based高速串行通讯的电子系统。
In sum, this paper implements the design of image grab card based on PCI bus and this card provides excellent hardware and flexible software interface for image acquisition and transfer.
综上所述，本课题完成了基于PCI总线接口的视频采集卡的设计，为图像的采集和传输提供了优秀的硬件基础和灵活的软件接口。
This paper implements the whole design of image grab card based on PCI bus, and discusses the hardware design, driver design and PCB circuit design of this system in detail.
本文实现了基于PCI总线接口的图像采集卡的整体设计，详细地论述了该系统的硬件设计、驱动程序设计和PCB版图设计。
We study and analyze PCI bus protocol and apply PCI9050's interface chip to design the interface card of PCI bus and compile drive software of its interface card.
对PCI总线协议进行了分析和研究，采用PCI9050接口芯片设计了PCI总线接口卡，编写了接口卡的驱动程序。
The design of a laser marker controller card based on PCI bus, including hardware development and drive program, is discussed in the paper.
论文从硬件和驱动程序两个方面对基于PCI总线的激光打标控制卡进行了研究，并进行了实物的设计。
The design of a laser marker controller card based on PCI bus, including hardware development and drive program, is discussed in the paper.
论文从硬件和驱动程序两个方面对基于PCI总线的激光打标控制卡进行了研究，并进行了实物的设计。
应用推荐