• Buffer pool activity, including table space and table information based on DB2 snapshot data.

    缓冲池活动,包括基于DB 2快照数据的表空间和表信息。

    youdao

  • BUFFERSIZE indicates the capacity (in 4k page) of the buffer space.

    BUFFERSIZE表示缓冲区空间的容量(以4K页面为单位)。

    youdao

  • The third value is the maximum send buffer space (overridden by wmem_max).

    第三个值是发送缓冲区空间的最大字节数(该值会被 wmem_max 覆盖)。

    youdao

  • Thus, provide sufficient buffer pool space to support index reads.

    因此,应提供足够的缓冲池空间来支持索引读操作。

    youdao

  • Now the data is stored in the user address space buffer.

    现在数据被储存在用户地址空间缓冲区。

    youdao

  • Space of emptiness has applied functions of hold, support, buffer etc., which should be the most calculated parts during the course of package shape design.

    虚空间具有容纳、支撑、缓冲等应用功能,也是包装形态设计中最应考虑的部分。

    youdao

  • When increasing the value of the LOGBUFSZ parameter, you should also consider the DBHEAP parameter since the log buffer USES space from the database heap area.

    在增加LOGBUFSZ参数的值时,您还应该考虑DBHEAP参数,因为日志缓冲区使用来自数据库堆区域中的空间。

    youdao

  • Keep in mind that adjusting this value is often a short term solution, particularly if you request additional buffer pool space, which requires more overall memory.

    请记住,调整这个值常常只是短期解决方案,尤其是在请求更多缓冲区池空间时。

    youdao

  • A table space can only use one buffer pool.

    一个表空间只能使用一个缓冲池。

    youdao

  • The strnlen_user function takes two arguments: the user space buffer address and the maximum length to check.

    strnlen_user函数带有两个参数:用户空间缓冲区地址和要检查的最大长度。

    youdao

  • Filter conditions, such as buffer pool name, table space name, table name.

    过滤条件,如缓冲池名、表空间名、表名。

    youdao

  • Note that the page sizes of 8K for the buffer pool and table space are the same.

    请注意,缓冲池和表空间的页大小都是8K,两者是相同的。

    youdao

  • The page buffer provided here is in kernel space.

    此处提供的page缓冲区在内核空间中。

    youdao

  • The first copy is performed by the DMA engine, which reads file contents from the disk and stores them into a kernel address space buffer.

    DMA模块从磁盘中读取文件内容,并将其存储在内核空间的缓冲区内,完成了第1次复制。

    youdao

  • The most important reason to use more than one user table space is to manage buffer utilization.

    使用多个用户表空间的最重要原因是管理缓冲区的利用率。

    youdao

  • The strnlen_user function is used just like strnlen but assumes that the buffer is available in user space.

    strnlen_user函数也能像strnlen 那样使用,但前提是缓冲区在用户空间可用。

    youdao

  • The copy_from_user function copies a block of data from user space into a kernel buffer.

    copy _ from_user函数将数据块从用户空间复制到内核缓冲区。

    youdao

  • Furthermore, compressed pages of a DB2 table space remain compressed in the DB2 buffer pool in main memory.

    而且DB 2表空间的压缩页在主内存的db2缓冲池中仍保持压缩。

    youdao

  • All tables in the database are created in the default table space USERSPACE1, and buffer pool IBMDEFAULTBP in the default installation of IBM TSOM.

    数据库的所有表都是在IBMTSOM默认安装的默认表空间userspace1和缓冲池IBMDEFAULTBP中创建的。

    youdao

  • The qualifying RIDs are then taken by the fetch node to fetch the corresponding records and data pages from the table space into the DB2 buffer pool.

    然后通过FETCH节点获取合格的RID以提取来自表格空间的相应记录和数据页面到db2缓冲池。

    youdao

  • This is vital for large disks, where a 10 percent buffer could equal many gigabytes of potential space.

    对于大容量磁盘来说,这是至关重要的,因为其中百分之十的缓冲区可能等于许多个GB的潜在空间。

    youdao

  • It is important that the log buffer be able to hold the amount of log space used by an average transaction.

    使日志缓冲区可以容纳一般事务所使用的日志空间总量是很重要的。

    youdao

  • As a copy from user space, this function first checks that the buffer is readable via access_ok.

    由于从用户空间复制,该函数首先使用access_ok检查缓冲区是否可读。

    youdao

  • When you create a table space, you can associate it with a specific buffer pool (database cache) as well as to specific containers.

    当创建表空间时,可以将它与特定的缓冲区池(数据库缓存)关联起来,并关联到特定的容器。

    youdao

  • Memory space breach — Accomplished via stack overflow, buffer overrun, or heap error, enables execution of arbitrary code supplied by the attacker with the permissions of the host process.

    内存空间缺口——通过栈溢出、缓冲区溢出或堆错误来实现,以宿主进程的权限执行攻击者提供的任何代码。

    youdao

  • For example, a table space with an 8kb page size can only use a buffer pool with page size of 8kb.

    例如,页面大小为8kb的表空间只能使用页面大小为8kb的缓冲池。

    youdao

  • Consider buffer pool utilization, which might lead you to make some changes to the previous table space design.

    考虑缓冲池的利用率。这可能会使前面的表空间设计产生一些变化。

    youdao

  • Both strncpy (3) and strncat (3) require that you give the amount of space left, not the total size of the buffer.

    strncpy(3)和strncat(3)都要求您给出剩余的空间,而不是给出缓冲区的总大小。

    youdao

  • Because the buffer that I'll write to (page) is already in kernel space, I can manipulate it directly and use sprintf to write the next fortune.

    由于我们刚才写入数据的缓冲区(page)已经在内核空间中了,因此可以直接对其进行操作,并使用sprintf来写入下一个fortune。

    youdao

  • Because the buffer that I'll write to (page) is already in kernel space, I can manipulate it directly and use sprintf to write the next fortune.

    由于我们刚才写入数据的缓冲区(page)已经在内核空间中了,因此可以直接对其进行操作,并使用sprintf来写入下一个fortune。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定