In last, the approximate formulas of computing buckling pressure according to its "equivalent cylindrical shell" is also given.
最后还给出了按其“相当的正圆锥壳”计算临界压力的近似公式。
Strain, peel strength, critical buckling pressure and failure mode under various temperatures of PSP were investigated using experiments.
对钢丝缠绕增强塑料复合管应变、剥离强度、临界失稳压力、不同温度下的失效形式等进行了试验研究。
Series analysis showed that the critical buckling pressure of cylinder under external pressure could be obviously decreased with the inc...
系列计算表明，外压圆筒体屈曲临界压力值会随筒体椭圆度的增加而明显降低。
And buckling is the phenomenon that the bones do this and if now you put too much pressure on it the bones will break.
屈曲是一个这样现象，骨头这样，如果现在施加过大的压力，骨骼就会破裂。
Yet Mr Martinelli cannot be seen as buckling to foreign pressure if he is to maintain his popularity.
可是，假若ricardoMartinelli要维持他的声望，他不可能让外界认为向外国压力让步。
The analysis on nonlinear buckling of double-deck hyperbolic parabolic reticulated shell under the uniform pressure.
双层双曲抛物面网壳结构在均布压力作用下的非线性屈曲分析。
Based on the first-order shear deformation plate theory, axisymmetric governing buckling equations are derived for a functionally graded material circular plate subjected to in-plane pressure.
基于一阶剪切变形板理论，推导了功能梯度材料圆形板在边界面内均布压力作用下的轴对称屈曲方程。
The effect of the initial geometrical imperfection on the buckling critical pressure and buckling model has been taken into account in the finite element simulation.
在有限元模拟中，分析了初始几何缺陷对壳体起皱的临界压力和起皱形态的影响。
This paper presents the experiment and theoretical analysis of plastic buckling of rib and ring stiffened cylindrical shell under uniform external pressure.
本文进行了纵环加筋圆柱薄壳在均布外压作用下的屈曲试验和分析研究。
A comparison is made among current calculation methods for the buckling of ring-stiffened cylindrical shells under hydrostatic pressure.
对静水压力下环加肋圆柱壳弹性失稳临界载荷现有计算方法进行了比较和计论。
The mechanical behavior of steel webs with negative bending was studied with combined stress loads of flexure, axial pressure and shear to prevent local buckling in continuous composite beams.
为避免钢混凝土连续组合梁发生局部失稳，对负弯区钢梁腹板在弯曲应力、轴向压应力和剪应力联合作用下的力学性能进行了研究。
The in-plane buckling of Ring Structure under uniform pressure, radial concentrated forces, orthogonal forces, radial cable forces and under orthogonal cable forces.
在均匀压力、径向集中荷载、正交集中荷载作用下圆形环梁的在平面屈曲问题。
A shallow shell model is developed for the elastic buckling of a single wall carbon nanotube under a uniform external axial pressure by using the nonlocal elastic theory.
基于非局部弹性理论，在考虑小尺度效应影响的情况下，建立了单壁碳纳米管在均匀轴向外部压力下的壳体模型。
The dynamic buckling of the implosion liners driven by magnetic pressure has been investigated experimentally and numerically.
用实验及数值模拟方法研究了电磁内爆套简的屈曲响应规律。
The dynamic buckling of cylindrical shells under both coupling impact and internal or external pressure is different from the dynamic buckling of the structure under coupling impact loading alone.
有内压或外压的圆柱壳在耦合冲击载荷作用下的动态屈曲问题，与结构单独承受冲击载荷时的动态屈曲性态有很大差异。
Discuss respectively cylindrical shell buckling characteristic with internal or external pressure.
分别讨论均布径向外压和内压对圆柱壳动态屈曲特性的影响。
A dynamic plastic buckling analysis of three AMT aluminum alloy circular cylindrical shell with different thickness under external pressure and axial impact is presented in this paper.
本文利用AMT铝合金三种不同厚度的圆柱壳，在常外压和不同轴向冲击载荷作用下的柱壳塑性动力屈曲问题。
The research proves that the internal pressure due to the axial compressive stress and the circumferential membrane causes the buckling of the tank wall.
研究证实：罐壁竖直轴向压应力和由内压（静水和动水压力叠加）所产生的罐壁环向拉应力共同导致罐壁失稳，发生弹塑性屈曲变形；
In this paper buckling behavior of pressure bar is discussed and its critical condition is defined in mathematics. It makes concept about stability of pressure bar more precise.
通过对压杆失稳本质的分析和对临界状态的数学描述，使得有关压杆稳定的某些概念更为确切。
However, the thin-walled steel tubes are prone to local buckling under axial pressure, especially for the square and rectangular cross-section shape.
但是薄壁钢管在轴向荷载下容易发生局部屈曲，尤其是截面形状为方形或矩形时。
Mold Flow Analysis, Temperature Analysis, Fill Analysis, Pressure Analysis, Buckling Deformation Analysis, Structure Review, Parting Line, Fixed Mold, Moving Mold, Water Circuit.
模流分析、温度分析、填充分析、压力分析、翘曲变形分析、结构评审（初审、定型评审、终审）、分型线结构评审、定模结构评审、动模结构评审、水路分布评审。
Mold Flow Analysis, Temperature Analysis, Fill Analysis, Pressure Analysis, Buckling Deformation Analysis, Structure Review, Parting Line, Fixed Mold, Moving Mold, Water Circuit.
模流分析、温度分析、填充分析、压力分析、翘曲变形分析、结构评审（初审、定型评审、终审）、分型线结构评审、定模结构评审、动模结构评审、水路分布评审。
应用推荐