The invention relates to a braking method and device by way of inertial force.
本发明是一种利用惯性力刹车的方法及装置。
Compared with the analytical and experimental results, it is confirmed that the permanent magnet eddy-current brake is an effective braking method and FEM is suitable for analyzing it.
实验结果和理论分析表明永磁涡流制动是一种高效可靠的制动方法。通过与解析法和实验结果的比较，证明用有限元法分析永磁涡流制动的可行性和准确性。
Aiming at the decline of maximum braking force caused by the mass transfer during the course of braking, the article advances a method which USES active suspension system to reduce dynamic wheel load.
针对汽车制动过程中质量转移而使最大制动力下降的问题，提出利用主动悬架系统减小汽车动态车轮载荷的方法。
So the control method of ABS is one of the vital factors for deciding braking performance.
因此，汽车防抱死制动系统的控制方法如何选择，是决定其制动性能的主要因素之一。
Though the description deals with taxing loads as an example, this method can also be used to other ground loads such as turning load and braking load, etc.
本文虽以地面滑跑载荷数据为例进行阐述，但此方法也可以应用于转弯、刹车等地面载荷数据的处理。
The measurement method for braking moment variation rate of hoist mechanism with traditional instruments is introduced and its principle and data processing are described.
介绍用常规测试仪表，测定起重制动器制动力矩变化率的方法，并对测定原理、数据处理作了说明。
By analysis of downside phenomenon of heavy thing lifted by the crane motor, the working principle is expounded, and the method for reduction of braking time has been summarized.
通过对吊车电机所吊重物下滑现象的分析，阐述了制动器工作的原理，总结出缩短制动时间的方法。
This article introduces the method to compute the braking capability of horizontal belt conveyor's roller in detail and analyses the key problems of the calculation.
详细介绍了平运带式输送机滚筒制动能力的计算方法，分析了计算过程中应注意的问题。
The dynamic calculation method for full-range dynamic description when emergency braking is applied to heavy haul freight train is proposed.
进一步提出了对重载货运列车紧急制动进行全过程动态描述的动力计算方法。
A coordination control method of vehicle active front wheel steering and ABS on steering and braking conditions was presented.
针对汽车转向制动工况提出了一种主动前轮转向和防抱死制动系统的协调控制方法。
This article produced the method of recycling the braking energy and comparatived various methods; finally, obtained a higher efficiency energy recycling me.
给出回收制动能量的方法，并对各方法进行比较分析，得出一种效率较高的能量回收方法。
In this paper, numerical analysis is carried out by the finite element method for the transient temperature fields and thermal stresses of high-speed locomotive braking discs.
本文采用有限元方法对高速轮轨列车制动盘的瞬态温度场和热应力进行了分析研究。
For this reason, the paper discusses the method of calculation concerning the effect of braking current decrease by adequately increasing the maximum braking coefficient.
为此，讨论在整定计算中计及制动电流减小的影响时，适当提高最大制动系数的方法。
This article introduces the design and parameter method based on inverter plug-in capacitance regenerative synchronous braking principle.
提出了变频器外挂电容再生同步制动原理设计和参数计算方法。
The state of braking technique for downward belt conveyor is analyzed. With the dynamic design method, the optimized braking curve was obtained.
本文分析了煤矿下运带式输送机制动技术的现状及存在问题，应用动态设计的方法得出了优化制动曲线。
This paper explains the braking function of the general inverter and the effect and selection method of the braking resistance.
本文说明通用变频器的制动功能，以及制动电阻的作用和选择方法。
Then a method of electrical regenerative braking is brought up to realize feedback energy when the motor is braking.
又提出了一种能量回馈制动的方法，实现了电机制动时能量的回馈。
According to the character of medium-duty truck and the air braking system, the thesis studied concretely the structure project and control method of medium-duty truck's air ABS.
根据中型货车及其气压制动系统的特点，具体研究了中型货车气压abs的结构方案和控制方法。
Method for recovering electrical energy in a vehicle with regenerative braking.
在具有再生制动的车辆中用于恢复电能的方法。
This paper presents an analysis and calculation method for braking performance of Vehicles on straight road. The computer simulation and road tests are carried out with good consistency.
本文提出了一种汽车直线制动性能的分析和计算方法，并对具体的车型进行了模拟计算和实车道路试验。
It is also provided here the control method for mitigating the current impact produced when turning on or off the device in braking operation.
介绍了制动工况为缓和投切时产生的电流冲击而采取的控制方法。
They cover basic technical specifications, traction mode, power distribution method, braking, speed control, operation and maintenance.
内容涉及基本技术要求、牵引方式、动力分配方式、制动、速度控制、运用与检修等。
The boundary conditions and correlative parameters of brake discs are discussed, especially the method of heat flux of braking process for belt conveyor.
讨论边界条件和各种相关参数的确定方法，以及输送机制动过程热流载荷的计算方法。
This article produced the method of recycling the braking energy and comparatived various methods; finally, obtained a higher efficiency energy recycling method.
给出回收制动能量的方法，并对各方法进行比较分析，得出一种效率较高的能量回收方法。
This article presents the content, method and process of auto engine starting system test. This paper introduces many means and circuits of no-load test, overall braking test and solenoid switch test.
提出了汽车发动机启动系统测试的内容、方法及步骤，介绍空载试验、全制动试验、电磁开关试验的方法和线路。
This paper expound this disperse analysis method of train braking force, along with its application to study of braking force effective coefficient.
文中阐述了列车制动力的这种离散分析方法，以及它在制动力有效系数研究上的应用。
Focus on preventing drop system of braking force and two kinds of adjusting method about buffer in the course of braking . The application of use of example in this paper.
分析了制动绳防附系统制动过程中缓冲器产生制动力的计算和缓冲器的两种调整方法，并结合实例介绍了这两种调整方法的具体应用。
The method of controlling vehicle braking stability by active yaw moment is proposed.
提出了利用横摆力矩控制汽车在对开路面制动稳定性的方法。
The method shown in the paper will provide useful value of the application in designing the eddy current braking device.
文中的计算方法将为设计涡流制动装置时提供有用的应用价值。
The method shown in the paper will provide useful value of the application in designing the eddy current braking device.
文中的计算方法将为设计涡流制动装置时提供有用的应用价值。
应用推荐