In this paper, the bonding technique for the blended wing body mini UAV is presented.
本文介绍了翼身融合体无人机的胶接技术。
The bonding technique was applied in maintenance of hydraulic workover rig and drilling pumps too.
还介绍了在液压修井机和钻井泵维修过程的应用情况。
Finally, the channel-structured glass substrate was sealed to a cover glass plate by using room temperature bonding technique.
最后，采用室温键合技术，将带有微纳结构的基片与盖片封合成玻璃微-纳流控复合芯片。
The diffusion bonding technique of titanium alloy to other metals is one of the central issues in materials engineering currently.
先进材料钛及钛合金与其它金属材料的扩散连接技术是当前材料连接领域的热点研究课题之一。
The diffusion bonding technique of titanium or titanium alloy and nonmetals is one of the central issues in materials bonding field now.
钛及钛合金与非金属材料的扩散连接技术是当前材料连接领域的热点之一。
The wire was bonded with directly bonding technique to the labial or lingual surfaces of teeth according to the application steps of light-cure material.
按光固材料的使用步骤，将弓丝粘到牙列片段的唇侧及舌侧。
Through the control tests for several failure modes of bonding technique, it summarizes a relatively complete set of controlling measures for enhanced bonding reliability.
通过对粘片工序几种失效模式的对比试验、总结了一套针对该工序的较为完整的粘片可靠性增长的控制措施。
The latest developments of application of transient liquid phase bonding technique to pipe welding during recent years in Japan are introduced, and its reasons are analysed.
介绍了近年来日本在采用瞬间液相扩散焊焊管方面的一些进展，并综合分析了其原因。
The latest developments of applicalion of transient liquid phase bonding technique to pipe welding during recent years in Japan are introduced, and its reasons are analysed.
介绍了近年来日本在采用瞬间液相扩散焊焊管方面的一些进展，并综合分析了其原因。
Bracket direct bonding technique was used on 12 of the patients (220 teeth) randomly. The other 12 patients (224 teeth) were carried out with light-cure veneer bonding technique.
随机选取12例(220颗牙齿)患者进行托槽直接粘结技术，12例患者(224颗牙齿)进行光固化贴面粘结托槽技术。
The bonding technique of ceramics to metals is one of the central issues in materials engineering, and diffusion bonding is considered to be the most suitable method for bonding ceramics to metals.
陶瓷与金属的连接技术是材料工程领域的热点研究课题，而扩散连接方法被认为是陶瓷与金属连接最适宜的方法。
Bonding a strengthening plate to the tension face is an effective technique to repair reinforced concrete beams.
在受拉区表面粘贴加强片是加固混凝土梁的一种有效方法。
Wire bonding is a critical technique for realizing microwave hybrid circuit.
引线键合是实现微波混合电路的关键技术。
Also the technique for adjusting the amplifier dynamically in miniature package by supersonic bonding has been developed.
设计了一种用超声键合法在微型管壳内动态调试放大器的技术方法。
By using sheathed extrusion technique, the bonding and forming of stainless steel and semi solid aluminum alloy are successfully realized.
采用包套挤压成形方法，成功地实现了不锈钢与半固态铝合金的连接与成形。
The preparation method of alumina hollow fiber membrane by reaction bonding of aluminum oxide (RBAO) technique combined with dry wet spinning process was introduced in this paper.
介绍了铝氧化反应结合技术与干湿法纺丝工艺相结合制备氧化铝中空纤维膜的方法。
Burn-out of a microwave power device due to the poor bonding between beryllium oxide and base metal sink was investigated using Sound Scanning technique.
利用声学扫描检测技术，提示了热烧毁的微波功率器件氧化铍陶瓷基片与底座金属散热片的焊接不良现象；
A new technique of Top Cementing Pulsation(TCP)is developed to improve the bonding quality and prevent annular gas migration in the cementing operation.
为提高水泥浆胶结质量，防止固井后油气水窜，提出了脉冲振动固井新技术。
A review on the development including the equipment, technique, mechanism, bonding strength and the related factors of surface activated bonding at room temperature is given in this paper.
本文从实验装置、工艺流程、接合机理、接合强度以及影响因素等方面综合评述了表面活化常温接合技术研究的进展状况。
Statistical process control (SPC) technique is used to improve quality and reliability of microelectronic products, and monitor production conditions of wire bonding process.
采用统计过程控制(SPC)技术，提高微电路产品的质量和可靠性，监控键合工序的生产过程状态。
The basic principle of strain electronic measurement technique is introduced. The circuit of strain measurement with bonding resistance is analyzed and designed.
介绍了应力应变电测技术的基本原理，分析和设计了电阻应变测量电路。
Vacuum bonding is one of the advanced technique of mechanical procedure.
真空扩散焊接技术是机械热加工中一种先进的工艺方法。
It was shown by experimental results that the technique was effective for rapid and intuitive testing of the bonding quality and structure of an aluminum honeycomb composite test piece.
用红外热波技术对铝蜂窝夹层胶接结构进行检测，结果表明，该技术可对试件夹层胶接质量和蜂窝结构作快速有效直观的检测。
The H-bonding attraction usage expands the scope of the assembly technique because it is possible to fabricate the ultrathin films in organic solvents.
这种基于氢键的自组装使得许多不溶于水的高分子能够在有机溶剂中形成超薄膜，拓宽了自组装超薄膜制备的研究领域。
The results show that the technique of using epoxy resin adhesives as bonding materials between steel thimble and GFRP bars is practicable.
研究表明采用环氧类树脂粘结剂进行钢套管和GFRP筋的连接，技术可行；环氧类树脂粘结剂的粘结滑移关系曲线上升段具有双折线特性。
The results show that the technique of using epoxy resin adhesives as bonding materials between steel thimble and GFRP bars is practicable.
研究表明采用环氧类树脂粘结剂进行钢套管和GFRP筋的连接，技术可行；环氧类树脂粘结剂的粘结滑移关系曲线上升段具有双折线特性。
应用推荐