Eton College should have noted the bonding effect not only of the chapel, but also of songs like "Jolly Boating Weather".
伊顿公学本应该注意到凝聚效果不仅来自于小教堂，还应来自像《愉快的划船日子》之类的歌。
Stone drying: keep dry surface must, in order to achieve optimum bonding effect.
石材干燥：表面必须保持干燥，以达到最佳粘接效果。
The result shows that the bonding effect in the bond area is the decisive factor wh…
测试结果表明，粘合区域的粘合性能是影响织物手感性能的决定性因素。
The resonant peak of the gold nanoparticle will change due to the chemical bonding effect.
金纳米颗粒的共振峰会由于化学成键效应而改变。
Objective: To investigate the bonding effect of composite resins on titanium materials and dental hard tissues.
目的：研究复合树脂对医用钛材和牙体硬组织的粘结性能。
Perhaps his brief autobiographical reference to Eton should have noted the bonding effect not only of chapel, but also of songs like "Jolly Boating Weather".
或许，在他自传式的关于伊顿的简短介绍中，他提到的关键影响不仅应包括小教堂的，还应有“愉快的划船日子”这首歌的。
According to experts, the 'skin-to-skin' bonding between mother and baby has a tremendous effect on the baby.
根据专家们的说法，这种母子间皮肤和皮肤的亲密结束对婴儿来说有巨大的功效。
The distributed force model of intelligent beam structures is presented in considering the effect of bonding layer on basis of hypothesis of linear strain in the paper.
基于线性应变假设，提出了考虑粘贴层影响的智能结构梁分布力模型。
Effect of melamine derivative as pungent odorless formaldehyde donor on bonding properties of adhesive was also described.
文章还介绍了蜜胺衍生物作为无刺激性气味的甲醛给予体对粘接性能的影响。
The effect of silane and titanate coupling agents on the interface bonding state and the mechanical properties of GRPFN (Glass Fiber Reinforced PF Nylon)has been studied.
研究了几种硅烷偶联剂、酞酸酯偶联剂对玻纤增强PF尼龙界面粘结状态和力学性能的影响。
The strength of interfacial bonding showed different effect in the two systems.
界面键合强弱的影响在两体系中不相同。
Objective: Aim of this study was to evaluate the effect of silica coating with sol-gel process on bonding strength between glass infiltrated alumina ceramic and resin luting cement.
目的：探讨利用溶胶凝胶法进行纳米硅涂层表面改性对玻璃渗透氧化铝陶瓷粘结强度的影响。
To consider the effect of bonding characteristics of the adhesives between the piezoelectric layer and the functionally graded ones, a linear spring layer model is adopted.
为了考虑中间压电层与上、下功能梯度层之间的粘结效果，采用线性弹簧模型以模拟界面性能。
In this paper, the tension bending coupling model is presented by virtual work principle, the effect of the bonding layer between beam and piezoelectric actuator is considered in the analysis.
利用虚功原理，建立了单面粘贴有压电致动器的梁结构的拉伸-弯曲耦合模型，在分析过程中，考虑了梁与致动器之间粘贴层的影响。
The distributed force model of intelligent beam structures is presented considering the effect of bonding layer on the basis of theory of linear strain.
以线性应变理论为基础，提出了考虑粘贴层影响的智能结构梁分布力模型。
The effect of lone-pair electrons on bonding in defect states is also discussed and it is shown that they play a significant role in chalcogenide glasses.
探讨了孤对电子对于缺陷态化学键的影响，证实了孤对电子在硫属玻璃中的重要作用。
Bonding temperature, bonding time and interlayer thickness have an obvious effect on the shear strength of the joints.
连接温度、连接时间和中间层厚度对接头抗剪强度具有较明显的影响。
There is a significant effect of the bonding parameters to the joint quality and reliability.
键合参数对键合点连接质量有重要影响。
The effect of bonding time on the bonding strength of thick aluminum wire wedge bonding was studied under different ultrasonic power conditions.
试验研究了不同超声功率条件下，键合时间对粗铝丝引线键合强度的影响规律。
The extra stability was studied based on electronic effect, hydrophobic effect and hydrogen bonding of ligands.
从配体间的电子效应、疏水效应和氢键作用等方面对配合物的额外稳定性进行了讨论。
Objective: This study is to determine the effect of different surface anodizing and degassing-preoxidation on bonding strength of porcelain to Ni-Cr alloy.
目的：研究非贵金属合金在上瓷前经过不同的阳极钝化条件处理及除气、预氧化对金瓷结合强度的影响。
The stress distribution of continuous and recessed bonding single-lap joints is discussed with use of elastoplastic finite element method (FEM) and experiment, considering the effect of fillet.
运用弹塑性有限元法结合实验研究了连续和间隙连接的单搭接接头应力分布规律，并考虑了胶瘤的影响。
The effect of modified hide glue agent on the bonding property of urea-formaldehyde resin was studied to improve the application performance of UF resin.
研究了化学改性皮胶加入脲醛（UF）树脂对胶合性能的影响，旨在提高普通脲醛树脂应用性能。
The new technology enhanced whole bonding quality of explosive cladding plate more, reduced explosive charge in large scale, lowered disadvantageous effect on environment around.
此工艺进一步提高了爆炸复合板的整体结合质量，同时再次降低了焊接装药量，减小了对周围环境的不利影响。
CONCLUSION: Polymerization shrinkage of composite resin has negative effect on bonding strength of adhesives.
结论：树脂固化时的体积收缩可在黏结层产生较大的应力，影响黏结强度。
In process parameters, the rf power and pressure affect the number, energy and composition of the basic elements, the substrate temperature effect the surface diffusion and atomic bonding.
工艺参数中，射频功率和压强综合影响了基元数量、能量以及成分，基片温度主要影响表面扩散、原子成键。
The present invention provides a bonding liner for top grade costume with 'green, environmental protection' effect.
本发明在于提供一种具有“绿色、环保”效果的高档服装用粘合衬。
It is shown that using the same laser parameter has effect on bonding quality of surfacing and matrix with different layers by optical microcope, microhardness.
对覆层与基体结合机理进行了分析，发现随着堆焊层数的增加，激光堆焊对基材与覆层过渡区有加大的影响。
The effect of reaction phase on bonding strength was also discussed.
分析了反应相对接头强度的影响。
The effect of reaction phase on bonding strength was also discussed.
分析了反应相对接头强度的影响。
应用推荐