The mechanics theory on the bus and coach body structure design is introduced in this paper.
简述色彩设计、色彩构成理论在客车色彩和图案设计中的应用。
The analyzed result provides design theory for the new type bus and reference for the rebuilding and optimizing of the body structure design.
分析结果为新车型的开发提供设计依据，为车身结构设计的改进和优化提供参考。
The work has reference value for impact security simulation research, body structure design, safety performance analysis and traffic accident treatment.
本文的工作对轿车的碰撞安全仿真研究具有借鉴意义，对车身结构设计、安全性能分析和交通事故处理具有参考价值。
By studying the influence of some of the main components, the influence factors of the modal and static stiffness in the body structure design are found.
通过研究主要零部件对结构扭转刚度及低阶模态的影响，明确了车身结构设计中的主要影响因素。为轻型客车车身设计提供了参考依据。
Key technologies of electric vehicle include power system, vehicle body structure design and analysis, overall vehicle control and energy management system etc.
电动客车的关键技术包括动力系统、整车车身结构设计与分析、整车控制和能量管理系统等。
The stiffness of bus body has a tremendous influence on the performances of bus-body. Therefore it is important to meet the requirements of the stiffness in initial bus-body structure design.
客车车身刚度对客车车身性能有很人的影响，满足车身刚度要求是客车车身结构初步设计的一个重要目标。
The computation analysis shows that the car body structure design is reasonable and meets the locomotive general (arrangement) and relevant national standards for (locomotive) static strength.
最后通过计算分析，校验说明该车体结构设计合理，满足了机车总体布置和国家相关标准对机车静强度的要求。
Calculation results show that the strength and stiffness of the body structure have met the design requirements. However it is necessary to make further optimization for the original design.
计算结果及路试表明，该型客车的车身结构的强度和刚度基本符合设计要求，但仍有待进一步优化设计。
Moving more convenient operating flexibility, improved body structure and caster design, use and move more convenient.
移动更方便经营更灵活，改进的车身结构和万向轮设计，使用和移动起来更方便。
Body structure of rugged, ergonomic design, prevent fatigue.
坚固的机身结构，人体工程学的设计，防止疲劳。
Through analysis on its rationality for the sizes of static bare body, a way to make structure design by using knitted garment block is introduced.
对照人体静态净体尺寸作了合理性分析，提出了运用针织服装原型进行结构设计的方法。
The basic working principle, major technique parameters, major equipment structure, and selection, design, and fabrication of key parts of rotators special for autoclave body polish were presented.
介绍釜体抛光专用转罐机的基本工作原理、主要技术参数、主要设备构成、关键部件的选用、设计和制作。
Structure and design of tower body, packing, packing support and liquid distributor for a new type of packed tower are described.
介绍了填料洗涤塔的塔体、填料、填料支承装置和液体分布装置的结构和设计。
The design of the body frame topologic structure is presented, using FEM-based topological optimization technique.
利用基于有限元法的拓扑优化技术设计车身大骨架的拓扑结构。
Combining the example of drawing die design for the rear side member of automobile body, studied on the drawing die structure design of saddle-shape part.
结合车身零件——后纵梁拉伸模具的设计实例，对马鞍形汽车车身零件的拉伸模具的结构设计进行了研究。
The key to reduce the internal noise level is that we should estimate the acoustic field accurately and then go on low noise optimization design to body structure during the course of designing.
降低车辆内部的噪声的关键是在设计阶段要准确预估车内声场特性进而对车身结构进行低噪声优化设计。
The bodywork structure is the main load-bearing body in a well car, and its design quality will directly influence the well car.
车体是落下孔车中的主要的承载件。其设计的优劣将直接影响落下孔车的性能。
This machine adopts steel plate welding structure, the fuselage using the finite element analysis and design, Vibratory stress Relief of internal stress, so that body stable and reliable.
液压剪板机采用钢板焊接结构，机身采用有限元分析设计、振动时效消除内应力，使机身稳定、可靠。
Calculation result shows that tank structure meets the strength requirement, and the design of main body is reasonable.
计算结果表明：罐体结构满足强度要求，且主体设计比较合理。
The C-body design, compact structure, overall casting make the machine high rigid.
型机身设计，结构紧凑，整体铸造刚性好。
The causes of oil leak of motorcycle rear shock absorbers come from body design, product structure, assembly durability, and road, traffic, etc as well.
摩托车后减震器渗漏油问题，除受本身设计、部品结构及总成的耐久性能影响外，还受行驶道路、交通情况等因素影响。
The aim of the optimization design is to solve the contradiction between inner storage space of van body and structure deadweight and maneuverability of vehicle.
为解决车厢内部存储空间及结构自重与整车机动灵活性之间的矛盾，对某新型器材配送车内部结构进行优化设计。
The model has been validated by testing, which supports the rapid design of minibus body structure frontal crashworthiness during concept design phase.
所建的参数化模型已经通过了有效性验证，而且该模型支持微型客车概念设计阶段的结构正面抗撞性快速方案设计。
Then it introduces the design of the robot body structure and the control system of the whole structure.
然后分别介绍了机器人的本体结构设计和控制系统的总体结构设计。
According to the requirements of lightweight design in a new vehicle development, an improvement design is conducted on the original body structure with the mass of front-end structure reduced.
根据某新车开发轻量化设计的要求，对原车身结构进行了改进设计，减轻了前端结构的质量。
In this paper, die structure and design parameters, techno - economic analysis of liquid extrusion for the aluminium alloy oil pump body were introduced.
本文介绍了铝合金油泵壳体液态挤压的模具结构及设计参数、技术经济分析。
In this system the structure plan design, the load computation, the stress analysis, matches the muscle calculation, the construction drawing plan integration as a body.
在该系统中把结构方案设计、荷载计算、受力分析、配筋计算、施工图绘制集成为一体。
An optimization model for low noise design of an automobile body structure is developed based on the dynamic substructure modification method.
在动态子结构修改方法的基础上，建立了车身结构的低噪声优化设计模型。
The application of Finite Element Analysis FEA to the design of the structure of wind tunnel balance obtains the rule of stress distribution on the wind tunnel balance by computing the whole body.
把有限元法应用到风洞天平结构设计，对其整体结构进行了计算，得出了风洞天平各种载荷作用下的应力场。
The application of Finite Element Analysis FEA to the design of the structure of wind tunnel balance obtains the rule of stress distribution on the wind tunnel balance by computing the whole body.
把有限元法应用到风洞天平结构设计，对其整体结构进行了计算，得出了风洞天平各种载荷作用下的应力场。
应用推荐