The reasons of main bearing and engine block cylinder holes deformings were analyzed.
分析了主轴承孔变形及机体气缸孔变形的原因；
The screw Thread of the cylinder connecting block stripped.
气缸连接挡块的螺纹滑牙了。
Dial gauge with universal dial gauge bracket must be screwed to the cylinder block and placed against the crank arm.
百分表及通用百分表托架必须通过螺钉固定在气缸体上，位置与曲轴臂相对。
The structural dynamic response of a certain multi? cylinder internal combustion engine block is analyzed applying finite element method.
应用有限元方法对某多缸内燃机机体在活塞推力作用下的结构动力响应进行了分析。
The mechanism consists of several parts like crankcase, cylinder block, pistons, connecting rod, crankshaft, etc.
这一机构有一系列部件组成，如曲柄箱、气缸体、活塞、连杆、曲轴等。
We avoid designing the semicircle of the cylinder on the slide block because it will be pulled apart or cause drag marks.
圆柱特征要有一半圆不可以拆在滑块上，以免粘滑块造成拉白，拉断。
The closest cylinder hole in the block has a sleeve in place, while the other sleeve is displayed outside the block.
最接近的缸孔块有一个套筒到位，而其他外套筒显示块。
Computation and analysis of the cylinder block stress and deformation are conducted on a 6125q diesel engine in supercharged or cylinder diameter enlarged situation by using the finite element method.
本文应用有限元法，对6125Q型柴油机机体在增压和扩缸时的变形和应力进行了计算分析。
The oil pan and the lower part of the cylinder block together are called the crankcase; they enclose, or encase, the crankshaft.
油盘和气缸体的下部一起被称为曲轴箱，用来封闭或罩住曲轴。
The crankcase is the lower part of the engine cylinder block .
曲轴箱是发动机气缸体较低的部分。
This procedure is done with the engine cylinder head removed from the block.
程序用来从引擎区拆下引擎汽缸盖。
The joint between the cylinder block and the head must be tight and able to withstand the pressure and heat developed in the combustion chambers.
气缸体与气缸盖之间的结合处必须保持密封，并且能够承受燃烧室产生的高压和高温。
According to the DISA technical design Standard and our experience, we use chocked-unchocked gating system to design the complex structure and high-strength technical system of QD90 Cylinder Block.
参照DISA工艺设计标准并结合公司以往经验，使用封闭一开放式浇注系统设计出结构复杂、高强度的QD 90缸座铸件的工艺系统。
The cylinder head fastens to the top of the block, just as a roof fits over a house.
气缸盖安装在缸体的顶部，就像安在房子上的屋顶一样。
Tom has machined the second cylinder head flat, and now the block is beginning to take on the "V" shape.
汤姆加工第二缸盖持平，而现在该区块已开始采取的“V”字形状。
This is fitted in the cylinder block and is driven by the chain drive.
机油泵安装在气缸体中，由链条驱动进行驱动。
Position the cylinder heads onto head gaskets and cylinder block.
将汽缸盖安置到汽缸盖罩垫和汽缸体上。
We mainly produce the cylinder block and cylinder head castings.
我们主要生产汽缸体和汽缸盖铸件。
Besides, the load caused by temperature field most affects the cylinder block.
温度场产生的载荷对气缸体影响最大。
Sealing and lubricating fluid film between port plate and cylinder block of axial piston machines has complex shapes.
本文对轴向柱塞泵或马达缸体与配流盘之间的稳态油膜流动做了数值计算。
Remove the engine cylinder head from the cylinder block (refer to cylinder head removal in this section).
程序用来从引擎区拆下引擎汽缸盖。
The numerical computations for the heat transfer of JL465Q1 engine's parts (cylinder block, piston and cylinder head) under different operation cases were performed.
针对JL 465Q1发动机部件(缸筒、活塞和缸盖)在不同典型工况下的传热进行了数值分析计算。
The root causes of motorcycle cylinder block wearing are temperature variation and presence of hard abrasive dust.
摩托车发动机气缸磨损的根本原因在于温度的变化和硬质磨粒的存在。
A entity model for the cylinder block of YC6108 diesel engine has been constructed and the modal analysis been implemented.
建立了YC 6108柴油机气缸体的实体模型，并进行了有限元模态分析。
Piston ring excellent in resistance to scuffing, cracking and fatigue and method for producing same, and combination of piston ring and cylinder block.
有提高的抗擦伤性、抗裂性和抗疲劳性的活塞环，和它的生产方法，以及活塞环和气缸体的组合。
The joint between the cylinder Block and the head must be tight and able to withstand the pressure and heat developed in the combustion Chambers.
气缸体与气缸盖之间的接合处必须保持密封，并且能够承受燃烧室产生的高压和高温。
The features of cylinder block and cylinder head core assembly vertical casting process are introduced.
介绍了缸体、缸盖组芯立浇工艺的特点。
The features of cylinder block and cylinder head core assembly vertical casting process are introduced.
介绍了缸体、缸盖组芯立浇工艺的特点。
应用推荐