In this paper, the dynamic mechanical property and the phase inversion of the polyurethane (PU) -polyvinyl (PVA) blend system were studied.
本文研究了聚氨酯(PU) -聚乙烯醇(PVA)共混体系的动态力学性质、相逆转现象和透气性能。
The mechanical properties and fluidity of HDPE/vulcanized rubber powder blend are studied.
研究了HDPE/硫化胶粉共混材料的力学性能和流动性能。
The rheological property indicates the machinability of the blend and the mechanical property of the blend after the addition of starch decreased but the degradation property speeded up.
流变特性表明共混物可加工性，添加淀粉母料的共混物的力学性能有所降低而降解性加快。
The effects of spinning dope concentration, coagulation bath temperature and addition of persimmon leaves on the mechanical properties of blend fiber were studied.
研究了纺丝原液浓度、凝固浴温度、柿叶添加量对共混纤维的力学性能的影响。
The rheological and mechanical properties of ABS/SBS blend of injection grade were studied and the morphological structure of the blend was analyzed in this paper.
本文研究了注射级ABS/SBS共混体系的流变性能和力学性能，分析了共混物的形态结构。
The fatigue failure and mechanical properties of conventional, semi-efficient and efficient curing systems of NR/BR(70/30) blend were studied.
研究了NR/BR为70/30（质量比）时普通、半有效和有效3种硫化体系共混物的拉伸疲劳寿命和力学性能。
The blend of PCL and PCL-gSt was prepared, and the mechanical properties, hydrophobicity, interface properties of the blend were investigated.
进而制备了接枝改性淀粉和聚己内酯的共混材料，并对共混材料的力学性能、疏水性和界面性能进行评价。
It can improve mechanical performance by adding PPg - (St-MAH) to PP and PA6 blend systems.
加入到PP和PA 6共混体系可以改善PP和PA6的相容性和提高机械性能。
The effect of the blending time on the structure, the static and dynamic mechanical properties of dynamically vulcanized EPDM/PP blend was investigated.
研究了共混时间对动态硫化EPDM/PP体系结构、静态以及动态力学性能的影响。
The mechanical properties, wear properties and micro-morphology of the prepared blend were studied.
并对共混物的力学性能、磨耗性能及微观形态进行了研究。
The effects of the kinds and levels of flame-retardants, the levels of plasticizers on the mechanical properties and flame resistance of the blend were investigated.
探讨了阻燃剂、增塑剂用量对共混体力学性能和阻燃性能的影响。
PTT blend toughened by POE and POE-g-MAH were prepared by melting blending, and the morphology, crystallization properties and mechanical properties were studied.
通过熔融共混制备了POE及其马来酸酐接枝物增韧PTT 共混物，研究了增韧PTT共混物的结晶性能、力学性能和形态。
The results showed that the mechanical properties of blend were significantly improved by adding 13 phr of different compatibilizers, in which a block copolymer, SEBS was the most effective.
结果表明，加入1～3份不同种类的相容剂均可明显改善共混物的力学性能，其中嵌段共聚物SEBS的作用效果最佳。
The blending method had almost no effect on the mechanical properties of the blend system, but had somewhat effect on the elongation at break of the blend system.
物料的混和方法对体系的大部分力学性能影响不大，对断裂伸长率有影响。
The effects of HDPE on the mechanical performances of modified PP blend are studied.
研究了HDPE对改性PP共混体系力学性能的影响及其原因。
According to the actual demand of large port mechanical design, product configuration technology design based on blend reasoning is proposed.
根据我国大型港口机械设计的实际需要，提出了基于由实例推理和规则推理构成的混合推理的产品配置技术。
The effects of blend ratio, curing system, reinforcement agents, soften agents and silane coupling agents on dynamic mechanical properties of IIR/CIIR blends were researched.
研究了共混比、硫化体系、增强剂、软化剂和硅烷偶联剂对IIR/CIIR共混胶动态力学性能的影响。
The influence of the mixing temperature and blending ratio on the mechanical properties of CR/PVC blend was investigated and the microstructure of CR/PVC blend was observed on TEM.
研究了混炼温度和橡塑共混比对CR/PVC共混物力学性能的影响，并通过电镜观察CR/PVC共混物的微观结构。
The micro structure and macro properties of PES/PA blend in the presence of compatible agent were studied through the tests of mechanical properties, rheologic properties, IR, DSC and SEM.
通过力学性能、流变性能的测试，以及IR、SEM研究了PES／PA 合金在相容剂存在下的微观结构与宏观性能。
The physical and mechanical properties and durability properties of the geopolymer blend cement(GBC) concrete and the ordinary Portland concrete(OPC) are compared in laboratory experiments.
用正交试验确定合成地聚物水泥的最优配方，以单因素试验说明改变沸石的质量分数和粒度对地聚物水泥机械性能的影响。
Addition of 2% of the amphiphilic copolymer is beneficial to the blending of polystyrene and epichlorohydrine rubber, improving the physico-mechanical properties of the blend.
加2％星形嵌段共聚物有利于聚苯乙烯与氯醇橡-胶的共混，使产物的物理机械性能有所提高。
The results show that the compatibility of the blend films is good, and the comprehensive mechanical properties are improved compared with those of single component.
结果表明：共混膜组分之间相容性良好，综合力学性能比单一组分有所提高。
The effect of the mixing rotor on the homogenizing blend SEBS with PP was proved by the characterization of the structure and the mechanical properties.
通过力学性能与结构表征，证明了密炼转子模块对SEBS与PP均匀共混加工的作用。
The effects of terpolymer contents on thermal performance, mechanical properties and rheological behavior of the blend were investigated.
结果表明随三元共聚物含量的增加 ，共混物的玻璃化温度及维卡软化点逐渐上升 ；
The effects of terpolymer contents on thermal performance, mechanical properties and rheological behavior of the blend were investigated.
结果表明随三元共聚物含量的增加 ，共混物的玻璃化温度及维卡软化点逐渐上升 ；
应用推荐