These methods are verified by thermal bending tests.
上述方法在热弯曲试验器分析中均得到了验证。
Cyclic bending tests of a box girder with longitudinal stiffeners were also carried out.
进行了纵筋加强箱形薄壁梁模型的循环弯曲试验。
Bending tests on walls and columns along their weak axis showed that both have high elastic deformation capacity.
对墙体和柱的沿弱轴的弯曲试验结果表明，它们都具有强的弹性变形能力。
For the brittle ceramic materials, flexural strengths are determined by the stress at fracture in transverse bending tests.
对脆性陶瓷材料来说，抗弯强度即为横向弯曲试验中样品断裂时的应力。
To invesigate the bending characteristics and obtain material properties of wheat stalk, four-point bending tests were performed.
为研究小麦茎秆的抗弯性能和获得茎秆材料常数，本文首先对小麦茎秆进行了四点弯曲的试验研究。
Five specimens for three-point static bending tests, five for thickness swelling (ts) were cut from each board according to ASTM D1037-96.
五件样品为三个点的静电弯曲测试，五因为厚度增大(TS)从依照美国材料试验学会D 1037 - 96的每董事会被减低。
Horizontal loading tests of walls and bending tests of beams along their strong axes reveal that the energy-absorbing capacities of both are high.
墙体的水平荷载试验以及梁的沿强轴的弯曲试验结果表明，它们吸收能量的能力都是强的。
The modes of local buckling and general failure for honeycomb sandwich plates under pure bending loads are studied through four-point bending tests.
本文通过四点弯曲试验研究了含脱层的蜂窝夹芯板在纯弯载荷作用下的局部屈曲模式和破坏模式，指出局部屈曲模式是跳跃失稳模式。
Based on the results of four-point bending tests of 10 RC beams, this thesis studies the flexural performance of the strengthening RC beams with near surface mounted CFRP strips.
本文对10根钢筋混凝土梁进行了四点弯曲试验，研究了CF RP板表层嵌贴法加固混凝土梁的抗弯性能。
Bending tests were conducted on five types of hull framing structure of fiberglass reinforced plastics fishing vessels and the results of the tests were optimized by using the weighted factor method.
通过对玻璃钢渔船的五种船体骨架结构形式的弯曲试验，测得其力学性能。
Tests used to assess the ductility and malleability of stainless steel subjected to bending.
测试不锈钢在弯曲状态下的延展性及可锻性。
This paper presents the structural features and characteristics of the radial impact tester, torsional fatigue tester, rotary bending tester and radial load tester used for the tests.
本文介绍了用于该试验的径向冲击试验机、扭转疲劳试验机、旋转弯曲疲劳试验机和径向载荷疲劳试验机的结构形式及性能特点。
Theoretically analyzing the method and formula which can deduce the moment function of piles by measured bending moment through model tests.
理论分析由实测弯矩推求桩身弯矩函数的方法，公式。
Fatigue properties of three case hardening steels for heavy duty gears after carburization were investigated by means of rotating bending fatigue tests.
利用旋转弯曲疲劳试验方法研究了三种重载齿轮钢渗碳后的疲劳性能。
This paper presents the design and production of submarine composite power cables with optical fibers as well as the mechanical tests-wrapping test, tensile test and bending test.
本文叙述了海底光纤复合电力电缆的设计、制造及进行的盘绕、拉伸、张力弯曲等机械性能试验。
Tension and bending fatigue tests were carried out to investigate the fatigue behavior of polymethylmethacrylate for edge attachment element at different temperatures.
研究了有机玻璃边缘连接元件在不同温度下的拉伸和弯曲疲劳特性。
Impulse excitation and sine stable sweeping tests of local bending modes of the frame columns were conducted.
对框架柱进行了局部挠曲模态的脉冲激励试验和正弦稳态扫描试验。
The product can pass the EU electric carpet bending and other performance tests.
产品能通过欧盟电热毡弯曲等性能试验。
Tests of measuring torque moment verified that circuits with four strain gauges could get rid of the influence exerted by the bending moment.
介绍了三种测应变的线路，通过实验证实，在测扭矩时，用4片电阻应变片构成的线路，可以排除弯矩的影响。
By means of tensile tests at high temperature, bending strength and indentation, it is found that the mechanical properties of silicon mainly depend on surface states, dislocations and impurities.
利用高温拉伸、抗弯测试和显微压痕测试等研究手段，指出硅材料表面状况、位错和杂质是其机械性能的主要影响因素。
All rig tests of fatigue life, tension intensity, bending intensity for auto drive axle.
能自行开展汽车驱动桥的各项疲劳寿命、扭转强度、弯曲强度等台架试验测试。
In the present study, tensile and repeated impact as well as rotated-bending fatigue tests were carried out.
本研究进行了渗硼试样的拉伸、多次冲击以及旋转弯曲疲劳试验，并与未渗硼试样进行比较。
And make out the program to obtain bending moment, shear force and lateral earth pressure of piles based on measured bending moment through model tests.
并且编制由实测弯矩推桩身弯矩函数，桩身剪力，土压力的程序。
The current biaxial bending design formula always use the moment magnifier factor of in plane bending, which based on finite tests data, it's a semi- theoretical -semi-experience formula.
现今规范中的双向压弯构件的稳定验算公式中的弯矩放大系数都是套用平面内的弯矩放大系数，它是建立在有限的试验基础上的，是一个半经验半理论的设计公式。
The results of the tests reveal that the effect of the vertical bending transverse to the bridge under the action of vertical loading is greater than that longitudinal to the bridge.
试验结果表明：结构在竖向荷载作用下横桥向竖向弯曲效应大于纵桥向竖向弯曲效应；
In chapter 7, the tests and applications of the PLC control system of the frame cold-bending machine with mechanical hands are introduced briefly.
第7章简要介绍了机械手肋骨冷弯机PLC控制系统的调试和应用情况。
Based on a series of fatigue tests, the change laws and the main influence factors of FRP strain of strengthened RC beams under cyclic bending loads were analyzed.
根据一系列常幅疲劳试验，分析了抗弯加固rc梁中FRP疲劳应变的变化规律和关键影响因素。
Based on the tests of 12 web steel truss beams, the carrying capacities, failure modes and bending rigidities of the typical truss beams were provided.
根据12根无比钢桁架梁的承载力试验，获得了典型桁架梁在竖向荷载作用下的极限承载能力、破坏模态及抗弯刚度。
Based on the tests of 12 web steel truss beams, the carrying capacities, failure modes and bending rigidities of the typical truss beams were provided.
根据12根无比钢桁架梁的承载力试验，获得了典型桁架梁在竖向荷载作用下的极限承载能力、破坏模态及抗弯刚度。
应用推荐