The matters are not harmful by releasing the bending energy generated when the micron bubbles break.
通过微米气泡破灭时产生的弯曲能的释放，使得这些物质无害化。
Furthermore, kinetic energy, bending energy and rupture energy are coupled through the bent radius of the petals.
通过花瓣的旋转曲率半径实现了花瓣动能、弯曲能和断裂能之间的耦合。
The least bending energy method takes the bending energy as the objective function, and gets the reasonable cable forces by seeking the least bending energy.
最小弯曲能量法以结构的弯曲应变能为目标函数，通过求出最小弯曲能量来求得合理索力。
The bending Angle increases with an increase of the energy density.
增加能量密度，板料的弯曲角度显著增大。
Under the constant bending times, the biggest bending angle can be obtained with an optimal accumulative line energy value.
在扫描次数一定的情况下，存在一个最优的累积线能量使弯曲角达到最大；
This paper discusses the problems of the unsymmetrical bending of cantilever rectangular plates under various loads by the energy method.
本文用能量法讨论了悬臂矩形板在多种荷载作用下的不对称弯曲问题。
Meanwhile, the bending of a rectangular plate with complicated boundary conditions is calculated by the principle of minimum potential energy with mixed variables.
同时，应用混合变量的最小势能原理于计算一复杂边界条件矩形板的弯曲。
It firstly derivates theoretical analysis formula of force and stroke by using beam bending theory and energy method.
首次采用梁的弯曲理论和能量法结合的方法推导了弯曲力和行程的理论解析公式。
A bending of rectangular plate with complicated boundary conditions is calculated by use of the potential energy principle with mixed variables of plates.
应用该势能原理计算了一复杂边界条件矩形板的弯曲。
With data obtained from low temperature bending and bending creep test, a simple calculation method is given for calculating rupture energy.
应用低温弯曲和弯曲蠕变试验所得数据，给出了破坏能的简单计算方法。
According to the principle of minimum potential energy, the governing differential equations and boundary conditions are established for T-beams with wide flanges under vertical bending.
根据最小势能原理，建立宽翼缘t梁竖向弯曲的控制微分方程及边界条件。
The parameters that deeply effect on the bending strength were porosity, energy input and the overlapping of weld metal.
明显地影响抗弯强度的参数是气孔，输入能量的大小和焊接金属的重叠性能。
The methods of compressing strain energy and bending strain energy are adopted to study low temperature performance of montmorillonite modified asphalt with two different montmorillonites by indoo.
通过两种武汉市售蒙脱土和实验室纯化蒙脱土，采用压缩应变能、弯曲应变能的方法，进行蒙脱土改性沥青低温性能研究。
Horizontal loading tests of walls and bending tests of beams along their strong axes reveal that the energy-absorbing capacities of both are high.
墙体的水平荷载试验以及梁的沿强轴的弯曲试验结果表明，它们吸收能量的能力都是强的。
Loading plastic soils into bending is an effective method of causing soil fracture with both minimum force and energy requirements.
弯曲加载是需要最小力及最少能耗使塑性土壤破碎的一种有效的加载方式。
Then the maximum bending moment and the energy absorption capacity under collapse from obtained the moment-angle curve will be evaluated.
评估了在扭矩角引起的破裂时，最大的扭矩和能量吸收能力。
When the joints are destroyed by bending(or shearing), the energy Absorption capacity of eccentric joint is inferior to that of no-eccentric joint.
当节点都为梁端受弯破坏或都为核心区受剪破坏时，偏心节点的耗能能力小于非偏心节点；
A bending of rectangular plate with complicated boundary conditions is calculated by use of the potential energy principle wit...
应用该势能原理计算了一复杂边界条件矩形板的弯曲。
The design of bending forming mill of solar energy water-heater support, which is applicable to the village usage, was introduced.
介绍了适用于农村使用的太阳能热水器支架弯曲成形机的设计。
Using the criterion of "minimum bending strain energy", the optimum hoisting points of the column are determined with the method of "three step cycling coordinate search".
以“弯曲应变能最小”为优化准则、采用“三步循环坐标搜索法”求解最优吊点坐标。
Meanwhile, the springback potential energy principle is applied to calculate the springback deformation of a pure bending of curved beam.
同时，应用该回弹势能原理于纯弯曲梁的回弹变形计算。
For the two-bar robot arm, we focus merely the whole kinetic energy at horizontal condition, and neglect the change of potential energy due to the bending deflection of the robot arm.
对二连杆机器人手臂在水平状态下仅考虑总的动能，而忽略由于手臂挠曲变形而产生的位能变化。
A two-step damage identification method of cracked beams is proposed based on the kinetic energy density and the bending spring model.
基于动能密度和弯曲弹簧模型，提出了裂纹梁损伤识别两步法。
Besides the stirring forces, the swirling strength may be reinforced by using bending nozzle, which use the height potential energy of molten steel in ladle.
通过数值计算和物理模拟两方面发现，在不使用外加动力的情况下，利用钢包内钢液面位置势能的弯水口注流可以在离心室内产生相当强度的旋流。
In the method the modal strain energy of an element is divided into tension modal strain energy, torsion modal strain energy and bending modal strain energy.
该方法将单元模态应变能分解为拉压、扭转和弯曲模态应变能，利用单元的主要模态应变能分量与结构固有频率的改变量对结构裂纹位置进行识别。
Finally, the dynamic simulated potential energy principle is applied to dynamic simulating calculation of the bending of rectangular plates.
最后，用动力模拟势能原理对矩形板进行了动力模拟计算。
The utility model relates to a machinery used for fabricating energy saving lamp tubes, in particular to a tube bending device of a dual-spiral type energy saving lamp tube.
本实用新型涉及节能灯管的制造机械装置，尤其涉及双螺旋型节能灯管的弯管装置。
The invention provides a bent-tube heating furnace for heating and softening when a straight tube is processed into a spiral tube by bending in energy-saving lamp manufacture.
本发明是一种在节能灯管制造中将直管弯折加工成螺旋管时加热软化用的弯管加热炉。
The invention provides a bent-tube heating furnace for heating and softening when a straight tube is processed into a spiral tube by bending in energy-saving lamp manufacture.
本发明是一种在节能灯管制造中将直管弯折加工成螺旋管时加热软化用的弯管加热炉。
应用推荐