The spline finite point method for bending analysis of thin slab is introduced in the paper.
采用样条有限点法和截面内力塑性系数法对薄壁曲线箱梁的弹塑性问题进行了求解。
A computer method is presented in this paper for the bending analysis of unbonded prestressed concrete structures after cracking.
本文建立了无粘结预应力混凝土结构开裂后弯曲计算的计算机方法。
According to the engineering theory of plastic bending, the elastoplastic bending analysis of a beam is conducted using differential quadrature method.
根据梁塑性弯曲的工程理论，采用微分求积法进行了梁的弹塑性平面弯曲分析。
A meshless local radial point interpolation method (LRPIM) for the bending analysis of a nonhomogeneous moderately thick plate is presented in this paper.
本文提出的无网格局部径向点插值法(LRPIM)，的非齐次中厚板的弯曲分析。
Through bending analysis of bending parts, according to bending characteristic, the bending parts were classified into deforming area, transition area and un-deforming area.
通过对弯曲件弯曲变形的观察分析，并根据其变形的特点，将被弯曲板料分为变形区、过渡区和非变形区三个区域。
The chosen economists mostly go about their business in a consistent way, refining, extending or occasionally bending a Shared framework of analysis.
入选的经济学家绝大多数以一以贯之的方式做学问，在常规的分析框架下进行改进和扩展，偶尔也会另辟蹊径。
This paper describes the performance test, contact fatigue strength test and bending fatigue strength test on the gear reducer of involute point contact Ferrographical analysis is made.
本文对渐开线点啮合齿轮减速器进行了性能试验、接触疲劳强度和弯曲疲劳强度试验，同时还进行了铁谱分析。
The experiment and analysis results show that frame model with truss transfer storey has partial bending shear deformation.
试验和分析结果表明：带桁架转换层框架呈局部弯剪型的变形特性。
Based on the academic analysis, a biaxial bending member is equivalent to a single bending member by the rule of equivalent cross section.
在分析大量文献资料的基础上，采用“等效截面”将双向受弯构件转化为单向受弯构件。
Bending stresses and contact stresses of the gears were investigated by finite element method in the static analysis.
在齿轮的静力学分析中，利用有限元的方法对齿轮的齿根弯曲应力和齿面接触应力进行了研究。
Through the design of bending die for the back hoop of silencer, die design analysis and die structure for large cylinder part considering springback compensation was introduced.
通过对消音器后环箍弯曲成形模的设计，介绍了考虑弹复补偿后，较大圆筒件成形模具的设计分析和模具结构。
Based on basic training, in-depth analysis of specific standing, flexion, backward bending, torsion, inverted, relax type foundation.
在基础培训的基础上，深入具体分析站立，前屈，后弯，扭转，倒立，放松等体式的根基。
The article showed the integration of artificial neural network and expert system in artificial intelligence, which was introduced in the analysis of bending parts' defects.
提出将人工智能中的人工神经网络技术和专家系统技术相结合，并将其引入弯曲件缺陷分析中去。
Influence of the magnetic damper on bending modal damping of the system is studied by theoretical and experimental modal analysis.
通过理论计算及试验模态分析，研究了磁悬浮阻尼器参数对系统弯曲模态阻尼比的影响。
It has been recommended a technology and die of bending ring with analysis of its forming process, using in that of bending ring in progressive forming die.
介绍一种卷圆工艺和模具，并对模具弯曲成形过程进行了分析，指出该方法可以用于级进模上成形。
The structural properties of concrete bridge externally prestressed with CFCC, and the analysis methods of deflection, ductility, bending and shear design of the bridge are discussed.
探讨了碳绞线体外预应力混凝土桥梁的结构特点和构造措施，以及该类桥梁中挠度、延性及抗弯、抗剪的计算分析方法。
It indicates that there are significant differences for microfibril Angle, basic density, bending strength and rate of shrinkage of poplar 63 and poplar 69 by variance analysis.
方差分析表明：63杨、69杨微纤丝角、基本密度、抗弯强度和干缩率差异显著，说明63杨和69杨受滩地类型影响较大。
The analysis of a four-point bending test of box girder specimens shows favourable agreement with experimental data.
对箱形桁材的四点弯曲试验的分析表明与试验数据吻合良好。
The results can be reference to the qualitative analysis and quantitative study to the bending character of a complex shaft system coupling vibration of the rotary machine.
分析结果为研究旋转机械复杂转子系统耦合振动中弯振特性的定量、定性分析提供了依据。
A simplified analysis method for the ultimate strength of ship's hull girder under cyclic bending was proposed.
给出了循环弯曲载荷下船体梁极限强度的简化分析方法。
According to the interaction between every two piles, the pile-head flexible matrix of the bending viscoelastic dynamic analysis of pile groups is given.
根据桩间两两相互作用关系给出了群桩弯曲粘弹性动力分析的桩头柔度矩阵。
The post-buckling and carrying capacity of thin-walled box-like structures under bending and twisting was predicted by the finite element analysis of stiffened composite panels.
通过复合材料加筋壁板后屈曲有限元分析，预测盒形薄壁结构在弯扭组合作用下的承载能力。
The paper presents an analysis of the axisymmetric bending of a functionally graded circular plate under elastically supported boundary condition.
对周边为弹性支承边界条件下的功能梯度材料圆板轴对称弯曲问题进行了分析。
In the light of bending of radiation tube in cracking furnace, analysis is done in detail to present related prevention, adjustment and correction measures.
针对乙烯装置裂解炉运行中比较普遍存在的辐射段炉管弯曲现象进行了详尽的分析并提出了相应的预防、调整和矫正对策。
The gear bending strength analysis is a foundation in research, such as gear power capacity rating, profile correction, as well as vibration and noise of gearing.
齿轮弯曲强度分析是轮齿承载能力、振动、噪声及修形等研究的基础。
The macroscopical survey and micro cosmic analysis of unqualified cold bending test samples of Q235and HP295hot -rolling plate had been stu died.
对Q235及HP295热轧板冷弯不合格试样进行了宏观观察及微观分析。
According to theoretic analysis, computing the bending deflection of every roller is enabled to ignore the effect of the web and only allow to the rectangular section made up of flange plates.
理论分析认为求解各可调辊的压下挠度时，可以不考虑腹板的影响而按翼缘组成的“矩形”断面来进行。
Based on theoretical analysis of stepped bending vibration boring bars, the frequency equation of a stepped bending vibration boring bar with circular and square sections is established.
通过对阶梯式弯曲振动镗刀杆的理论分析，推导出了圆形截面和矩形截面组合的阶梯弯曲振动镗刀杆的频率方程，并对阶梯弯曲振动镗刀杆进行了试验研究。
Based on theoretical analysis of stepped bending vibration boring bars, the frequency equation of a stepped bending vibration boring bar with circular and square sections is established.
通过对阶梯式弯曲振动镗刀杆的理论分析，推导出了圆形截面和矩形截面组合的阶梯弯曲振动镗刀杆的频率方程，并对阶梯弯曲振动镗刀杆进行了试验研究。
应用推荐