Theapplicatiom of ARI to Sichuan Oil Field in thin bed analysis and reservoireffectiveness evaluation are elaborated.
本文阐述了ARI在薄层解释、储层有效性评价等方面在四川的应用实例。
It offers the evidence for further analysis of dynamic characteristic in adsorption bed and the optimizing system design.
这为进一步分析吸附床内的动态特性，优化系统设计提供了依据。
These data have provided a basis for the process analysis and mathematical simulation of inverse turbulent bed reactor.
研究结果可为后续逆流湍动床废水生物处理过程分析与模拟提供传质基础数据。
Its main work includes the Yellow river sediment cross-section tests, river bed surface quality sampling and particle size distribution analysis and so on.
其主要工作内容包括黄河河道断面淤积测验，河道表层河床质取样及颗粒级配分析等工作。
The correlative formulas for pressure drop of cross-flow rotating packed bed was deduced with the method of dimensional analysis.
采用因次分析的方法推导出错流旋转填料床气相压降的无因次关联式。
In this thesis, through the analysis on mass balance and energy balance in the dense phase and sparse phase, the bed temperature cybernetic model is established in this thesis.
本文通过对循环流化床锅炉密相区和稀相区的质量平衡与能量平衡的分析，建立了床温控制模型。
The weak links of the bed are found by the analysis and a proposal for improving the structural design of broaching machines was presented.
从计算结果分析了该机床支承件薄弱环节，并对卧式拉床结构提出了设计改进的建议。
The paper studies the change of tideland after the century inning by method of "artificial transformation" forecast and moveable bed model based on the analysis of the bed evolution data.
文章在河床演变资料分析的基础上，采取“人工变形”预测与大范围动床模型试验预测等手段研究了世纪丘围涂工程实施后堤外高滩的变化。
The manufacturing method, dynamic characteristics analysis and the comparison with casting machine bed are described in the paper.
介绍了聚合物混凝土机床床身的制造方法、动态特性，以及与铸铁机床床身的优劣比较与分析。
The analysis of forces exerted on material on vertical section shows that there should be an Angle between the vibrated force direction and crosswise of separation bed.
物料在纵断面上的受力分析表明：分选机激振力方向应与分选床横向有一定角度。
Analysis of causes of bed an in commercial Banks and seeking strategy loan risk avoiding, has become the essential task to commercial Banks in China.
分析商业银行不良贷款形成的原因，寻找规避贷款风险的对策，已成为我国商业银行非常迫切的工作。
The paper analysis the forging craft of rocker shaft bed part, introduce the computing technology of high energy screw press apparent pressure value.
文章分析了精锻工艺的可行性，介绍了高能螺旋压力机公称压力值的计算方法。
The dynamic model of the test bed includes dynamical equation of simulation impact for vehicle, dynamic response and contrast analysis of the experimental results.
该试验台动力学模型包括汽车模拟碰撞动力学方程、动态响应及试验结果对比分析。
Two schemes were put forward in the paper: movable bed type steam activation device and fluidized bed type steam activation device, and calculation and analysis were conducted respectively.
在文中提出了移动床式蒸汽活化器和流动床式蒸汽活化器两种方案，并进行了计算和分析。
It has deduced the mathematical function of the sediment void ratio on the basis of stress and structure analysis, and then the mass and volume conversion of deep bed filtration sediment is given.
通过受力情况和结构特性的分析，推导出了沉积物空隙率的函数表达式，在此基础上，给出沉积物质量与体积的换算关系。
This paper presents an analysis of the characteristics and laws of formation of pressure waves in guns, based on the ignition process and propellant bed structure.
本文根据点火过程和药床结构，分析膛内压力波形成的特征及其规律。
An automatic testing system for traditional hydraulic pump test - bed was sel up, which includes such functions as signal acquisition, data storing and analysis based on virtual instrument technique.
本文对传统的液压泵试验台测试系统进行了改造，建立了一套基于虚拟仪器技术的集信号采集、分析、存贮等功能为一体的液压泵自动测试系统。
By using the methods of theoretic analysis, model experiment and spot test, the mechanical condition of tunnel bed, the mechanism of tunnel bed disease and the treatment measures are studied.
运用理论分析及模型试验和现场试验的方法，对铁路隧道基底结构的受力状态、病害产生的机理以及病害的整治措施进行研究。
Based on the chemical analysis, the change of chemical composition of slope rock and the weathering process of slope in red bed were stated.
根据对红层岩石的化学分析，阐述了红层边坡风化过程中化学成分的变化及其风化进程。
Based on the analysis of torture and deformation of lathe bed after quenching, the machining process has been regulated, which acquires technical requirements.
对车床床身淬火后产生的扭曲变形现象进行分析，针对现行加工工艺的特点，改进了加工工艺技术。
The model of combustion fraction for dense phase in circulating fluidized bed combustor has been built up, based on thermal balance, gas analysis and total gas amount.
建立了基于热平衡法、烟气分析法和烟气量法的循环流化床锅炉燃烧室密相区燃烧份额计算数学模型，并分析比较了各种模型的特点。
Theoretical analysis and experimental works have been carried out to study the solid particle attrition phenomena in a spouted-fluidized bed with a draft tube.
本文对导向喷动流化床中固体颗粒的破损进行了理论分析和实验测试。
This paper includes a systematic analysis and correlation study on the sporopollen assemblage, stratigraphic sequence and geochronology of the Siwangou red bed section in Yaojie, Gansu.
对窑街寺湾沟-炭洞沟红层孢粉和地层层序及时代进行了系统分析与对比研究。
The MSS analysis is expected to offer an effective tool for exploring the particle motion in fluidized bed with coarse granules.
多重分形谱图分析有望为大颗粒流化床中颗粒运动规律的探测提供一种新的手段。
This paper deals with statistical analysis method and spectral analysis method for classification of sea bed using side scan sonar data.
本文对用侧扫声纳信号进行海床类型识别的统计分析法和频谱分析法进行探讨。
The experimental system, experimental method and result analysis of biomass gasification in a circulating fluidized bed are introduced.
介绍了生物质循环流化床气化的实验系统、实验方法和结果分析。
The author makes analysis and description on the control features of circulating fluid bed boiler and puts forward control methods.
针对循环流化床锅炉控制的特点进行了分析和阐述，并提出了控制方法。
The author makes analysis and description on the control features of circulating fluid bed boiler and puts forward control methods.
针对循环流化床锅炉控制的特点进行了分析和阐述，并提出了控制方法。
应用推荐