Battery temperature sensor input voltage below an acceptable range.
电池温度感知器输入电压低于可接受范围。
The experiment results showed that, at elevant environmental temperature, the exhaust fan can reduce effectively the battery temperature and increase the battery capacity.
试验结果表明:在环境温度较高时,这种散热风扇能有效地降低电池组的温度,提高电池组容量。
MCU control charge and discharge by the state, achieve the best charge state. Automatic detection and tracking external battery temperature, built-in temperature compensation.
单片机控制充电和放电状态,达到最佳的充电状态。自动检测和跟踪外部电池温度,内置温度补偿。
In this paper, the demand of Ni-MH battery charging management is discussed, and thus a management method based on battery voltage, battery temperature, and charging time is put forward.
分析了镍氢电池充电管理系统的设计需求,提出了一种采用电压、温度和时间进行综合控制的充电管理方案。
Moreover, when the dosage of composite PCM is not enough, battery temperature increases first and then decreases with increase of porosity, when the phase change latent heat plays a dominant role.
复合相变材料用量不充足时,相变潜热占主导作用,增加孔隙率将使电池温度先增大后减小。
Therefore, in order to maintain battery life and performance, it is crucial to keep the batteries within the temperature range where their operating characteristics are optimal.
所以,为了维持电池的寿命和性能,必须保证使电池在适当的温度范围之内工作,从而使电池的工作性能保持在最佳状态。
Due to the low cost of the battery cells and excellent performance at ambient temperature, Lithium-ion (Li-ion) battery is a promising technology for propulsion applications.
由于此蓄电池的低成本和在环境温度下的优秀性能,锂电池将会在推进力应用的技术上有广泛的前途。
Once heated up to its operating temperature, the battery generates enough heat on its own to keep the liquids molten.
一旦加热到工作温度,电池自身产生足够的热量使液体熔化。
The battery is encased in stainless steel and is reported to have to maintain a temperature of 500 degrees to keep the metals inside in liquid form.
由于密度不同,因此几种液态金属材料彼此之间并不会混合在一起,而会像油水那样出现分层结构。电池被装在一个不锈钢罐中,保持500度高温以便金属处于液化状态。
Todd Mittleman, a Honda spokesman, said that the Clarity’s range is dependent on “the outside temperature and individual driving style.” He said an auxiliary lithium-ion battery helps to extend range.
本田的发言人托的 密特曼说Clarity的航程随“外界的温度和个人的驾驶风格而变化”他说辅助的锂电池可以加长航程。
Cpufreqd: This daemon can be configured to react to battery level, ac status, temperature, running programs, processor usage, and more.
cpufreqd:这个守护进程可以对电池电压、AC状态、温度、正在运行的程序、处理器使用量等做出反应。
Temperature and phase changes in the gel could also be harnessed to charge a battery.
而胶体中的温度和相性的改变能被利用来对电池充电。
An Apple customer service representative said the automatic shutdown may be related to the phone's temperature, operation or battery life.
据苹果一名客服代表表示说,自动关机也许和手机的温度、操作、以及电池寿命有关。
If low charging rate is desired, you should use the BREAK-IN mode. Charging in that mode is terminated by only time (1.6 times battery capacity) and temperature.
如果你想用很低的充电电流进行充电,应该使用BREAK -IN模式。此充电模式只会因为时间(1.6倍电池容量)和温度终止充电。
Currently, this battery can onlyoperate above its phase transition temperature but researchers are trying toreduce this operational transition temperature to room temperature.
目前,这种电池只能在其相转变温度以上工作,不过研究人员正在尝试将这个工作转变温度降到室温。
Although the temperature sensors will safeguard battery overheating, lower charging rate might not cause enough heating in the batteries to trip the sensors.
同样温度感应器会因为电池过热而终止充电,但由于充电电流太低,也不能另电池产生足够的热量让温度传感器感应。
CR2032 battery holder using fire retardant material, the use of PBT plastic case, the use of new environmentally friendly materials, product temperature, and environmental protection.
CR2032电池座采用防火阻燃材质,采用PBT塑料壳,采用新型环保材质,产品耐高温,环保。
Based on environment temperature and battery terminal voltage, the controller can also adopt proper charge mode, such as overcharge and floating charge, to extend the battery life.
控制器还根据环境温度和蓄电池端电压选择适当的充电方式,蓄电池将充满时,控制器会自动调整成为过充和浮充方式,从而能有效地延长蓄电池的寿命。
Pressure and temperature method is assumed to measure hydrogen consumption, Battery voltage and current is continuously measured and integrated to calculate electric energy consumption.
采用压力温度法测量氢气消耗量,对蓄电池电压、电流进行连续测量和积分运算得到电能量消耗。
Let stand for a battery, the temperature is too high, the self-discharge of the battery.
电池静置时,温度太高,电池的自放电加剧。
Results may vary due to temperature, age of battery or other factors.
结果可能会因温度,电池或其他因素的时代。
Since the actual SOC of lead acid battery is influenced by many factors, such as temperature, cycle of discharge and aging of battery, it is difficult to obtain ideal results by traditional methods.
由于铅酸蓄电池真实的SOC受许多因素如电池温度、充放电次数、电池老化等因素的影响,传统的SOC预测技术很难达到理想的效果。
Tests show that the system is able to supervise and measure serial battery reliably and accurately at request voltage and temperature.
系统简单经济,经过试验,在要求的电压和温度指标下,能可靠、准确地对串联电池组进行监测。
The experiment on the influence of drying temperature of the dry charged positive plates after formation on the starting ability of battery was conducted.
本文主要对干荷正极板化成后的干燥温度对电池起动性能的影响进行了探讨性的试验。
The effect of cathode, electrolyse and temperature on the performance of the battery has been investigated in terms of the shortcircuit discharge.
研究了不同正极材料、不同电解质和不同温度对电池短路放电性能的影响以及电池的重复短路放电性能。
The effect of cathode, electrolyse and temperature on the performance of the battery has been investigated in terms of the shortcircuit discharge.
研究了不同正极材料、不同电解质和不同温度对电池短路放电性能的影响以及电池的重复短路放电性能。
应用推荐