Using the direct integrated method, a CAPP system was researched and developed based on UG.
作者及所在的课题组应用直接集成的方法，研究与开发的一个基于UG的CAPP原型系统。
The three-dimensional digital model of compression equipment and chamber are obtained based on UG package.
利用UG软件建立了压缩装置的三维实体模型。
Researched software development techniques based on UG, and established mould board parametric model and parametric drive mechanism.
进行了UG二次开发技术研究；建立了模板参数化模型、模板参数驱动机制；
This paper introduces the principle in 3d Stepover of milling manufacturing process based on UG and discusses its application in surface milling.
阐述了基于UG铣加工过程3d跨距的原理，探讨其在曲面铣削中的应用。
The CAD system of casting process, including processing parameters, riser and gating system design modules, has been developed based on UG molding software.
在UG造型软件基础上开发了铸造工艺CAD系统，包括工艺参数设计、冒口设计和浇注系统设计等模块。
On the basis of studying the algorithm of information extraction of assembly tree, the algorithm of assembly information extraction based on UG is put up forward.
在此基础之上，对装配树信息提取的算法进行了研究，并提出了一种基于UG装配环境的装配信息提取算法。
Different CAD platforms need the corresponding data interface. So this thesis aims at this problem and the geometric programming interface based on UG. is studied in it.
不同的CAD平台需要有相应的数据转换接口，本论文就是针对这一问题，研究并开发了基于UG平台的几何编程转换接口。
This paper introduces the principle in Tool axis interpolation of milling manufacturing process based on UG and discusses its usage via the application in milling manufacturing of a turbocharger.
阐述了基于UG铣加工刀轴的插值原理，通过在涡轮铣加工编程方面的应用实例，探讨了其使用方法。
The method of divided-area machining for complicated surface panel die based on UG software has been presented with introduction to such CAM process in details of production of an automotive panel.
本文基于UG软件提出了一种复杂曲面覆盖件模具的分区加工方法，并以汽车前盖内板的凸模加工为例，详细介绍了基于该法的模具CAM过程。
The paper studies in detail parametric modeling methods provided by UG, which are respectively called method based on feature and that based on sketch.
本文研究了UG的参数化建模技术，对基于特征和基于草图两种建模方法作了详细论述。
This paper introduces a CAPP system embedded in UG, and a method of process decision-making based on feature is emphasized.
介绍了一个内嵌于ug的CAPP系统，着重研究了基于特征的工艺规程决策机制。
With using CAM module of UG software to compile the machining program, owing to the reasonable process based on IPW, efficiency of the die block has been increased greatly.
利用UG软件CAM模块来编制加工程序，提出基于IPW的最佳数控加工工艺，提高模具模块加工的效率。
Based on the analysis of flush toilet modeling that is one of the typical ceramic, with UG as software platform, flush toilet parametric CAD system is developed.
本文在对典型的卫生瓷产品—坐便器造型分析的基础上，以UG软件为平台开发了坐便器参数化CAD造型模块。
And used UG software for the virtual design, assembling and optimal analysis of the vacuum casting machine door gemel, based on virtual design idea.
介绍了UG软件中的虚拟设计、虚拟装配、优化分析技术，并基于虚拟设计的思想，运用UG软件对真空注型机的门铰链进行虚拟建模、装配和优化分析。
The realization method of shoe-last CAD/CAM system based on Unigraphics (UG) software was being studied.
采用离散设计方法和UG软件的点、线、面造型功能，实现鞋楦模型的建立和修改；
Based on the UG software, the rapid design on the encapsulated oil pipe is implemented using module coding and model parametric design.
基于UG的套装油管路设计系统，运用模块编码和模板模型参数化等技术开发，实现套装油管路的快速设计。
Based on a type of motorcycle frame, this paper USES the UG software for entity sculpt combining some parts drawing, and grids in the pre-disposing and post-disposing software MSC.
以某型号的摩托车车架实物为基础，使用三维造型软件UG进行实体造型，在前后处理MSC。
The methods of secondary development for UG based on parameterized technology were introduced. The interface technology in secondary development was discussed, and a typical example was given.
介绍基于UG参数化技术的二次开发方法，对二次开发中的接口技术进行了探讨，并给出了程序示例。
The rapid design module of the double-telescopic prop in the hydraulic support based on the UG secondary development is simple, practical and with strong interaction.
基于UG二次开发的液压支架双伸缩立柱快速设计模块简捷、实用、交互性强。
This article studies based on light truck driver axle of QX1060, discusses in detail from the UG software parametric modeling, establish of ANSYS FEM model, and the boundary conditions imposed, etc.
本文以轻型载货汽车驱动桥壳为研究对象详细论述了从UG软件中的参数化建模到ANSYS中有限元模型的建立、边界条件的施加等研究。
Based on the function of UG CAM in machining simulation and post processing, one kind of frame-part was machining in 5-axis milling center and the nc codes was obtained.
基于UGCAM软件强大的仿真加工及后处理功能，运用5轴数控高速铣削中心完成了某框架零件的加工并生成NC代码程序。
Based on the function of UG CAM in machining simulation and post processing, one kind of frame-part was machining in 5-axis milling center and the nc codes was obtained.
基于UGCAM软件强大的仿真加工及后处理功能，运用5轴数控高速铣削中心完成了某框架零件的加工并生成NC代码程序。
应用推荐