Based on reliability analysis of natural gas boosting system and taking the volume, weight, and total cost as the constraints, the system reliability was optimized.
以天然气增压系统的可靠性分析为基础，在体积、重量和总费用的约束条件下，通过优化设计使整个系统的可靠度最高。
This paper presents a control strategy of demand pulled spare parts inventory. It establishes a spare part demand prognosticating model based on reliability analysis.
提出了“需求拉动式”航空器材库存控制模式，建立了基于可靠性分析的航空器材需求预测模型。
Through the back-analysis of a computing example, the design optimization of pile-strut bracing structure of deep foundation pit is presented based on reliability analysis.
为了进行支护结构的可靠性设计，探讨了随机变量对支护结构设计的影响，并给出了进行支护结构计算的实例。
The optimize design were processed based on reliability analysis of detector, high voltage source and transmission driven circuit under the worst case, and the evident effect was good.
通过对探测器、高压电源、传输驱动电路在最坏情况下的可靠性分析，有针对性地对自然伽马测井仪进行了优化设计，效果良好。
The concept of time dependent reliability and the calculating model are proposed in this paper. In addition, the durability optimum design method based on reliability analysis is suggested also.
本文引入时变广义可靠度概念并建立相应的计算模式，提出了基于可靠性分析的耐久性优化设计方法。
Based on an analysis of the composition of drilling rig, characteristics of drilling process, and human features, a reliability model of man-machine control system for drilling process is established.
在全面分析钻井机械的组成、钻进过程的特点和人的特性的基础上，建立钻机钻进过程人机系统可靠性模型。
For quantitative analysis of automobile reliability based on its reliability data collected, it is necessary to recognize the distribution pattern of data in advance.
根据汽车可靠性工程数据，对其进行可靠性定量分析时，应该首先判别可靠性数据的分布规律。
A method of optimum design of rein forced concrete frame structure based on reliability is proposed, which integrates advantages of the reliability analysis and optimum design.
提出了一种融结构可靠性分析与结构优化设计于一体的钢筋砼框架结构的可靠性优化设计方法。
In this paper, a method of factor synthesis for automobile reliability index analysis based on expert experience is put forward.
本文提出了以专家经验为依据的汽车产品可靠性指标分配的因素综合法。
Based on the concepts of randomness and fuzziness, a fuzzy reliability analysis method of probability density function equivalent is proposed in this article.
依据随机性和模糊性的基本概念，提出了当量概率密度函数的模糊可靠性分析方法。
Based on the comprehensive reading of references about distribution network planning and reliability, the thesis presents the study of distribution system optimal planning and reliability analysis.
本文在广泛阅读国内外配电网可靠性分析和规划的有关文献的基础上，总结前人的研究成果，针对配电网的可靠性分析和优化规划进行了研究。
The reliability analysis of DC sensor based on its reliability model is processed, and the methods used to improve the system reliability are presented.
基于可靠性模型对该直流传感器进行了可靠性分析，并提出了改进系统可靠性的措施。
Based on the analysis of the relationship between safety and reliability, a model for aircraft safety analysis is established from the viewpoint of conditional probability.
在分析飞机安全性与可靠性关系的基础上，从条件概率的角度，建立了一种新的飞机安全性分析模型。
The paper intended to research the global optimization problem of the structural system of anti-slid pile with anchored rod based on the reliability analysis.
本文基于锚杆—抗滑桩的研究现状，在可靠性分析的基础上，对锚杆—抗滑桩结构系统的全局优化问题进行了研究。
Based on analyzing the characteristics of fuel supply system of launch site, a method of reliability analysis and evaluation of fuel supply system is proposed.
针对航天发射场加注系统特点，提出了可靠性分析和可靠性评定方法，解决了航天发射场可靠性分析和评定的建模问题。
Based on the analysis of the single disk data reliability. this paper provides new concepts of disk data reliability and presents.
本文从单盘数据可靠性的分析入手，提出了磁盘数据可靠性的几个新概念。
Based on the analysis of accelerated factor, the prior distribution of mission reliability under the field test environment is carried out.
在加速因子分析的基础上，给出了现场试验条件下可靠度先验分布的计算方法。
Based on the detailed reliability analysis for common pressure relay, two methods were proposed to reliably keep pressure relay work.
对普通压力继电器的可靠性进行了详细分析，提出了保证压力继电器工作可靠的两种措施。
A new method for system reliability analysis based on the graph theory and Boolean function was described.
提出了一种运用布尔函数与图论相结合，对系统进行可靠性分析的新方法。
Then the problem about tradeoff between reliability and maintainability is translated into nonlinear programming, based on the cost effectiveness analysis.
然后通过费用-效能分析的方法，把可靠性、维修性综合权衡问题转化为二元非线性规划问题。
Based on the analysis of the available methods of reliability weighted assignment for mechanical serial system, this paper employs fuzzy theory in the weighted assignment of reliability.
在分析原有机械串联系统可靠性加权分配方法的基础上应用了模糊理论，即充分考虑了影响系统各单元权数取值的各种模糊因素。
ObjectiveTo study the reliability and sensitivity of the gait analysis system based on digital video and image processing.
目的研究基于数字视频和图像处理的二维步态分析系统的可靠性、敏感性。
This paper provides reliability analysis based on different stability analysis theory and calculates the critical crack length of an engineering example as a reverse problem to stability analysis.
基于上述分析，将对各种稳定性研究技术通过实例进行深层对比，并对作为稳定性分析反问题的临界裂纹长度计算进行了工程实例的验证。
A new point-evaluation method for structural system reliability analysis is proposed based on conditional probability and numerical analysis method.
以条件概率和数值分析方法为基础，提出了一种新的结构体系可靠度点值估算方法，并通过算例说明了该法的应用。
The automotive reliability analysis method based on failure information from after-service webs of automobile manufacture is discussed in this paper.
介绍了利用汽车制造企业售后服务网络反馈的故障信息对汽车进行可靠性评价的方法。
The authors proposed a probabilistic design method based on theoretical analysis of reliability.
基于可靠性理论，提出了防洪堤的概率设计方法。
Based on reliability theory, a limit state equation for gate faceplate reliability analysis was founded.
基于可靠性原理，建立了闸门面板可靠度分析的极限状态方程。
Based on the reliability analysis of steel pressure vessels under the harshest condition, the fuzzy reliability theory of determining the testing pressure of steel pressure vessels is established.
基于钢制内压容器静强度在最苛刻压力试验条件下的可靠度分析，建立了统一确定钢制压力容器试验压力的模糊可靠性理论。
Based on the reliability analysis of steel pressure vessels under the harshest condition, the fuzzy reliability theory of determining the testing pressure of steel pressure vessels is established.
基于钢制内压容器静强度在最苛刻压力试验条件下的可靠度分析，建立了统一确定钢制压力容器试验压力的模糊可靠性理论。
应用推荐