The design of CAN bus hardware interface circuit based on SJA1000, the selection of chips, the design of software and the realization of CAN communication are expatiated.
论述了基于SJA1000的CAN总线的硬件接口电路的设计、芯片的选择、软件设计及CAN通信的实现。
Based on the analyses of the GPRS module control method, the corresponding hardware control circuit is designed in this paper.
本文通过对GPRS模块控制方法的探讨和分析，设计了其相应的硬件控制电路。
Based on the fixed errors of laser film printer, the paper gives one easy and simple calibrations arithmetic and sets up a way to achieve it by software and hardware circuit.
因为每台激光胶片打印设备未校准前的输出误差固定，故首先提出了一种简捷的激光成像校准算法，然后进行了软件和硬件电路的设计。
Based on the working principle of VSP1012 video signal processing interface for CCD imaging system, video signal processing circuit and its hardware have been designed for CCD imaging system.
在分析VSP1012型CCD视频信号处理芯片工作原理的基础上，设计了CCD成像系统的视频信号处理电路及其硬件电路。
Based on SG3525A PWM control circuit and the study, based on the design of the hardware structure of wire.
本文在对PWM控制电路及SG3525A的研究基础上，设计的送丝硬件结构。
It measures excess phase of voltage current by using digital circuit, Based on the reactive compensation theorem, the software hardware of the controller is deigned.
该控制器采用数字检测电路来获取电网电压与电流的相位差，从无功补偿的原理出发，设计控制器的软硬件。
Lastly, the hardware circuit, VHDL program design and debugging methods based on FPGA are discussed.
最后对基于现场可编程门阵列(FPGA)的硬件电路、VHDL语言程序设计及调试方法进行了讨论。
The functions and characteristics of the CCD signal processor XRD4460 are introduced, and the hardware and software design of CCD signal processing circuit based on XRD4460 is presented in detail.
本文介绍了专用CCD视频信号处理芯片XRD4460的功能与特点，并利用该芯片设计一种CCD视频信号处理电路，给出了其详细的硬件和软件设计。
This article was based on the former research, introduced the conccpt of the evolvable hardware, and illuminated the basic principle of the evolutionary circuit design.
电路进化设计是在可进化硬件研究的基础上提出的一种全新的设计方法。
The paper is about the hardware circuit & working principle of meter based on the low voltage power line carrier.
本文给出了一个基于低压电力线载波技术的电参数测量仪的硬件系统。
Establish internal communication agreement, devise the hardware decode circuit based on this agreement.
建立内部通信协议，设计出基于此协议的硬件解码电路。
Bluetooth-based intelligent measurement system is designed, and its accomplished methods are explicated for both hardware circuit and software part on Bluetooth HCI interface.
这里给出了一个基于蓝牙的智能测控系统的设计方案，并详细说明了该系统硬件电路设计和蓝牙hci接口的软件实现方法。
The portable blade frequency measurement instrument based on DSP is designed next. The DSP-based circuit board is made and the software program for testing hardware circuit board is coded.
论文完成基于DSP芯片的便携式叶片频率测试仪的硬件电路设计和电路板的制作，并完成对电路板的测试。
This article introduces a timing circuit design, which is based on coding switches and singlechip system. Hardware and software design of the circuit are also discussed in detail.
本文介绍了一种基于编码开关和单片机系统的定时电路设计方法，并对硬件电路设计和软件设计作了详细介绍。
A hardware control system based on DSP TMS320F2808 was designed, including DSP base circuit, signal feedback circuit, drive circuit, wire driving circuit and protection circuit.
设计了以TMS320F 2808DSP为核心的硬件控制系统，包括DSP基本电路、信号反馈电路、驱动电路、送丝电路以及保护电路。
An Electric power parameters measuring device based on MSP430F149 was introduced. The design of hardware circuit and software of the device was introduced.
介绍了基于MSP430F149单片机的电力参数检测仪，给出了电力参数检测仪的硬件电路、软件设计方法。
To introduce a kind of toxic gas detection intelligent instrument based on LONWORKS, including its functional principle, hardware circuit and software design.
介绍了一种基于LONWORKS总线的有毒气体智能仪表的工作原理、硬件电路设计和软件设计。
In this paper, on the PWM control circuit and SG3525A research, based on the design of the hardware structure of wire feeding.
本文在对PWM控制电路及SG3525A的研究基础上，设计的送丝硬件结构。
It measures excess phase of voltage and current by using digital circuit, Based on the reactive compensation theorem, the software and hardware of the controller is deigned.
该节制器采用数字检测电路来获取电网电压与电流的相位差，年夜无功抵偿的事理出发，设计节制器的软硬件。
A design scheme of radar interface based on USB technology is presented. Techniques of hardware circuit design, firmware programming and application software design are illustrated.
提出一种基于usb的雷达接口电路设计方案，给出硬件电路设计、固件编程、应用软件设计等关键技术的解决方法。
This paper introduces a new inversion control circuit based on 80c196mc microcontroller for thyristor medium frequency power supply. Meanwhile the hardware and software designs are also provided.
针对晶闸管中频电源的核心——逆变电路，提出了一种基于80c 196MC单片机的控制电路，给出了其构思的硬件和软件设计。
Introduced one ultrasonic distance testing system based on AT89C52 single-chip microcomputer and mainly described its hardware circuit, software design method and the operating principle.
介绍了一种基于AT 89 C52单片机的超声波测距系统，阐述了超声测距系统的硬件电路构成、工作原理及软件设计方法。
The paper introduces structure of wireless data transmission system, and expounds realization of hardware design circuit and software of DTU based on C8051F020 microprocessor and CDMA module MG801A.
对无线数据传输系统的构成进行了研究，阐述了基于C8051F 020微处理器和CD MA模块MG801A的数据终端的硬件设计电路和软件接口的实现。
According to the problems in charging and discharging process of lithium-ion battery, a kind of protection circuit based on software and hardware was designed.
针对锂离子蓄电池在充放电过程中容易出现的过充、过放、过流、过温问题，设计了基于软硬件保护的锂离子蓄电池保护电路。
The hardware structure and principles of the circuit design of the angle measuring device based on AT89S51 are analyzed.
分析了基于AT89S51单片机的角度测量的硬件组成、电路设计原理。
The hardware circuit based on USB bus and CPLD of the system of label image captured has been developed, including human-computer interaction interface.
开发了基于USB总线和CPLD的标牌图像采集系统的硬件电路以及人机交互界面。
The hardware circuit of double-interface gateway based on embedded system is designed in this article.
设计了基于嵌入式系统的双接口网关硬件电路。
At first, this paper researches and designs the hardware circuit of driving control system based on single-chip according to the special needs and provides the solution.
本文首先结合电动汽车的实际情况，研究和设计了基于单片机的控制器硬件系统，针对各部分的具体要求提供了相应的解决方案。
Hardware circuit design of the high speed multi-channel signal acquisition processing system based on VME and the PCI two kind of computers bus is the main part of this thesis.
基于VME和PCI两种计算机总线的高速多通道信号采集处理系统的硬件电路设计是本论文的主要部分。
On the analysis of the principle of ultrasonic distance measurement based on, given the realization of ultrasonic reversing radar system hardware design circuit diagram and software design flow chart.
在分析超声波测距原理的基础上，给出了实现超声波倒车雷达系统的硬件设计电路图和软件设计流程图。
应用推荐