Progress of optical phased array (OPA) technology based on electro-optic material is summarized.
综述了基于电光材料的光学相控阵(opa)的研究进展。
Process of the method is based on electro chemistry, reduction, physical adsorption and coagulation, etc.
该方法以电化学作用为主，兼有还原、物理吸附和混凝等多种机制。
The research on the scheme of Landing Guidance System based on electro-optical sensors is carried on first.
本文研究了基于光电成像的着陆引导系统方案。
Based on electrothermal principle and heat transfer theory, calculation formulas of electro heat parameters for direct resistance heating appliance are deduced in this paper.
根据电热基本原理和传热学理论推导出了直接电热电阻炉在恒压加热制度下，电热参数的计算方法。
A new spectrum shaping method, based on electro-optic modulation, to alleviate gain narrowing in chirped pulse amplification (CPA) system, is described and numerically simulated.
提出了一种新型的基于电光调制的激光光谱整形方案，该整形技术可以减轻啁啾脉冲放大系统中的增益窄化效应。
Based on electrothermal principle and heat transfer theory, a calculation formula of direct electro heating time was deduced in the paper. An experiment was carried out to testify the formula.
本文根据电热原理和传热学理论推导出了电接触加热时间的计算公式，并通过实验进行了验证。
A method of the electro hydraulic servo system identification modeling is presented based on support vector machines.
提出了电液伺服系统的支持向量机的辨识建模方法。
This article takes PROFIBUS as tool, USES the hydraulic servo system as the research object, and proposes digital self-diagnosis electro-hydraulic servo system research plan based on PROFIBUS.
本文以PROFIBUS总线为工具，把液压伺服系统作为研究对象，提出了基于PROFIBUS现场总线的数字式自诊断电液伺服系统的研究方案。
To achieve real time automatic levelling and vertical rise up and fall down of the static pile driver′s case, an electro hydraulic levelling system is designed for the static pile driver based on PLC.
为使静力压桩机在工作过程中能够实现实时自动保持机身水平与水平升降，设计了一种基于PLC的压桩机电液自动调平系统。
This paper introduces an electrohydraulic control system based on PLC. A double close - loop control system with electro - hydraulic proportional valve is adopted.
一种基于PLC的电液自动控制系统，采用了电液比例阀的双闭环控制系统。
A new scheme of using common model control based on input equivalent disturbance (ICMC) to design controller was presented for nonlinear electro-hydraulic servo control systems.
针对非线性的电液伺服系统，提出一种利用基于输入等价干扰的通用模型控制算法(ICMC)来设计控制器新策略。
The experimental results show that the adaptive controller based on DRFNN can make electro-hydraulic position tracking system more robust and obtain satisfactory tracking performance.
实验结果表明：基于DRFNN的自适应控制器可使电液位置跟踪系统具有较强的鲁棒性和满意的跟踪性能。
In order to improve the control performance of airborne electro-optical pointing and tracking systems, a variable domain control system based on fuzzy inference, is presented.
为了提高机载光电跟踪伺服控制系统的控制性能，提出了一种基于模糊推理的变论域自适应控制算法。
Based on the principle and technology of digital electro-optical measurement, the intelligent integrated switchgear system and control as well as protection combined automation system are discussed.
讨论数字光电量测系统原理和技术，基于此技术的智能集成开关设备系统和控制与保护集成的自动化系统结构。
A novel position controller for an electro-optical tracking system is designed based on Internal Model control (IMC) principle.
针对光电跟踪系统，提出一种基于内模控制原理的新型位置控制器设计方法。
Aiming at the tracking control problem of missile electro-hydraulic servo mechanism, a method of fuzzy sliding mode control based on sliding mode condition is presented.
针对导弹电液伺服机构的跟踪控制问题，设计了一种基于滑模产生条件的模糊滑模控制方案。
This paper deals with electro-ionization balance reaction based on thermodynamics and derives the formula of balance constant K3 for calculating balance reaction.
本文对电离平衡反应用热力学进行了处理，推导出了计算平衡反应的平衡常数K_3的公式。
In this paper, a novel electro-optic modulator based on free space coupling technology is proposed.
文章提出了一种基于自由空间耦合技术的电光调制器。
A hybrid control method for passive electro-hydraulic servo loading system was proposed based on new compensation structure and nonlinear PID controller.
研究了基于新型补偿结构和非线性PID控制器的被动式电液伺服加载复合控制方法。
A novel position controller for an electro-optical tracking system is designed based on Internal Model control (IMC) principle and characteristic of disturbance and reference input for system.
根据内模控制原理及光电跟踪系统参考输入及扰动输入特性，设计了一种新型位置控制器。
A hair cell vector hydrophone based on micro electro mechanical system (MEMS) was presented in this paper.
提出了一种纤毛式微机电系统(MEMS)矢量水声传感器的仿生组装技术。
The advanced control method based on this model is successfully used in electro-slag remelting plant of Xingtai Metallurgy and Roller Group and achieved a good effect.
基于此模型建立的先进控制方法已经成功运用于邢台冶金轧辊集团电渣炉车间，效果良好。
A one-dimensional numerical model for analyzing helium discharging of electro-optic switch driven by single-pulse process is proposed based on its microscopic physical mechanism.
根据单脉冲过程电光开关气体放电的微观物理过程，提出了氦气放电的一维数值模型。
Here the article introduces a working principle and systematic composition of a new type electro-optical type current transformer based on ROGOWSKI Coil.
现介绍一种基于ROGOWSKI线圈原新型光电电流互感器的工作原理及系统的组成。
Based on the common use of iron anode in electro-coagulation flotation, unit electrolysis voltage calculation model of iron anode has been constructed.
基于铁阳极在该技术中应用的广泛性，给出了应用铁阳极时的单元电解电压计算模型。
PAULWURTH came up with a modernization design of copper electro-refining based on METRO concept, used for the conversion from starting sheet to permanent steel cathode (PSC) process.
在从始极片向不锈钢阴极(psc)的工艺改造过程中，保尔·沃特提出了一种基于METRO理念的现代铜精炼电解设计。
The testing principle and the performing method of testing items such as speed, range, load, discharge voltage and current for electro-hybrid bicycle are described based on deciding the items.
分析和确定了电动助力车主要性能的检测项目，并对车速、续行里程、载荷、蓄电池的放电电压和放电电流等被测项目的检测原理及实现方法进行了探讨。
The thesis is focused on the study of Electro-optical Navigation based on DSP, including the design of the hardware platform and algorithm software module for moving object detection and tracking.
本文主要研究了基于DSP的光电返航导引系统，包括系统硬件平台构建和目标检测与跟踪算法的软件实现。
The system provides the function of statistic and analysis, which can analyse business expanding based on trade, electro-sort and date.
该系统还提供统计分析功能，可以分行业、用电类别、日期等对供电部门业扩报装情况进行统计分析。
Based on the theory of variable pole state feedback control, this paper makes the process design and implement of NC software and hardware on electro-hydraulic force servo system.
基于变极点状态反馈控制理论，对电液力伺服系统进行了数控软硬件的工艺设计及其实现。
应用推荐