Similar to the button, this is also a Swing-based control.
类似于按钮,这也是一个基于Swing的控件。
A German company called Evoluce built a gesture-based control system for Windows.
德国一家Evoluce公司为Windows制作了一个基于动作的控制系统。
Interventions based on research were designed to train and engage community health volunteers (CHVs) to implement a community-based control programme in Nepal.
研究设计的干预措施是为了培训和吸纳社区卫生志愿者,从而在尼泊尔实施以社区为单位的控制项目。
Brain-based control of conventional keyboards, allowing individuals to type without physically touching the keys, has been demonstrated at the universities of Wisconsin and Michigan.
威斯康星州和密歇根州大学已经证明,以大脑为基础的常规键盘控制技术,可以让人在不接触键盘情况下打字。
So an FPGA-based control method to realize the sampling was proposed.
因此,提出了一种基于FPGA的整周期等相位的采样控制方法。
Transmission delay influences the stability of Internet based control systems.
网络传输时延是影响远程控制稳定性的一个主要因素。
Finally, soft computing based control algorithms are applied in the ship steering.
本文最后把基于软计算的智能控制算法应用于实船的运动控制。
RBF Neural Networks (NN) based control strategy is proposed to compensate the disturbance moment.
提出了一种基于RBF网络扰动力矩补偿的控制技术。
It consists of a cutting table, a computer-based control system, a plasma generator and special software.
它主要由切割平台系统、电脑控制系统、等离子发生器和专用套料软件组成。
The authors have developed a computer based control system in bench test of engine using virtual technique.
作者运用虚拟技术开发出一个运用计算机进行控制的发动机台架试验系统。
This paper focuses on the swing-up and balance control of the inverted pendulum as well as its Internet-based control.
本文的主要研究内容是倒立摆的起摆控制、稳定控制和网络控制。
CAN BUS based control system is introduced in this paper, which is designed for PHHV (Parallel Hydraulic Hybrid Vehicle).
本文介绍了一种应用于并联液压混合动力车的控制系统。
The microprocessor based control provides intelligence to gather and process information about system defrost requirements.
微机控制,智能收集和处理系统除霜信息。
Therefore, this paper proposes a grid-based control system for a humanoid robot, and gives a method to realize it in detail.
为此,提出了一种基于计算机网格(以下简称网格)的仿人形机器人控制系统,并给出了该系统的具体实现方法。
Both the hardware and the software design of the MCU AT89C52-based control system of the vortex tube is discussed in this paper.
介绍了基于AT 89c 52单片机的涡流管控制系统的设计,包括系统硬件和软件的设计。
Basic locomotion models of walking for virtual humans and their inverse kinematics-based control methods are studied in this paper.
研究了虚拟人的行走模型和基于逆运动学的运动控制方法。
After the completion of rapid development of control prototype, the rapid development of target ECU-based control system is performed.
在完成控制原型快速开发的基础上,完成基于目标控制器的控制系统快速开发。
In this paper, an actual method is made to fulfil high - speed precision grinding of elliptic parts based on PMAC time - based control.
文章就实现椭圆形零件的高速高精密磨削的问题,提出了采用PMAC时基控制的实验方法。
PLC-based control technology in television transmitter is a basic application of computer control system in radio and television technology.
PLC技术在电视发射机控制系统中的应用,是微机控制系统在广播电视技术中最基本的一个应用。
Design and operation of such a time based control circuit for travelling mechanism are presented in the paper. The application is introduced.
文中介绍了这种时序控制大车运行电路的设计、操作及应用情况。
A separation principle for robust pole assignment in the full-order observer-based control system designs is proposed for descriptor linear systems.
针对广义线性系统,提出了基于全维观测器的控制系统设计的鲁棒极点配置分离原理。
The test-bed utilizes commercially available micro stages, a high-speed air turbine spindle, and linear ultrasonic motors and PC-based control board.
该试验台采用了商品化的微型工作台、高速空气涡轮主轴、直线型超声电机和基于PC的控制卡。
Thanks to the tight integration of the PC-based control solutions, the machine builder can obtain all the automation components required from a single source.
由于与基于PC的控制解决方案紧密整合,机器制造商可从单一资源中获得自动化所需要的所有元件。
Last, the configuration of the CAN-based control network and the development approach of the VCU for the series-parallel hybrid bus are introduced in this paper.
文章最后介绍了混联式混合动力客车整车CAN控制网络的结构原理和整车控制器的开发方法。
The IPC-based control software consists of man-machine interface application program, communication program between IPC and PMAC, motion programs and PLC programs.
基于ipc机的控制软件主要包括四个部分:人机界面应用程序、上下位机通讯程序、运动程序和plc程序。
The principle and system functions of the computer-based control system of a 4200/180 paperboard machine in Xielinjin pulp and paperboard mill, Russia are introduced.
介绍了俄罗斯谢林金纸浆纸板厂4200/180纸板机计算机控制系统的设计原理和系统功能。
A mixed control method combining fuzzy model-based control and neural network control is presented for a class of uncertain nonlinear system with multiple time delays.
一类多时滞不确定非线性系统,基于模型的模糊控制和神经网络控制相结合的混合控制方法。
A model based control scheme employing computed-torque control has been presented, and its applications in three different path planning methods have also been discussed.
设计了一基于模型的计算力矩控制算法,并深入探讨了其应用于三种不同轨迹规划方法下的控制性能。
This paper developed a CAN bus based control system for a hybrid electric vehicle (HEV), as well as its task, network figure and partial information streams of the subsystems.
介绍了基于CAN总线开发的混合动力汽车控制系统及各子系统的任务、网络图和部分信息流。
The ICH Q3D guideline emphasises developing a risk-based control strategy to limit elemental impurities which is summarised in an appropriate "Risk Management Summary" document.
ICHQ3D指南强调了开发基于风险的控制策略来限制元素杂质,该方法在“风险管理总结”文件里进行汇总。
应用推荐