The present status of Cu-based alloys with high strength and high conductivity is reviewed.
对高强度、高电导率铜基合金的研究现状进行了综述。
The most active research has been applied to aluminium, iron, copper based alloys and superalloy.
其中以铝基合金、铁基合金、高温合金及铜合金方面的研究最为活跃。
The methods can be used for qualitative and semi-quantitative analysis of Sn and Fe in Ti-based alloys.
本法可用于钛合金中锡、铁元素的定性分析和半定量分析。
Zinc-based alloys(ZA22, ZA27) may be formed by rolling and extrusion but with lower plasticity after extruding.
锌基合金（ZA22，ZA27）可以挤压和轧制成形，但挤压成形塑性偏低。
A notch sensitivity factor was derived in order to judge the stress concentration sensitivity of al Li based alloys.
建立了评价铝锂合金应力集中敏感性的缺口敏感因子。
Advanced aeroengine alloys such as titanium and nickel-based alloys are widely used for casing and compressor blades.
航空发动机重要零件如机匣、压气机风扇叶片等广泛采用钛、镍基合金等先进结构材料。
The results show that the repair in the finished product of Mg based alloys is feasible by multi layer laser cladding.
结果表明，使用激光多层涂敷的办法修复镁合金成品件是可行的。
On the basis of former formula for calculating vaporization rate constant a digital table was made for iron based alloys.
根据以前工作推导出的计算真空熔融合金中微量元素挥发速率的公式，对铁基合金制作了数表。
Using this model, the simulation investigations have been made on the phase transition kinetics of many advanced nickel-based alloys.
利用该模型已经对许多先进镍基合金的相变动力学进行了模拟研究。
The high aluminum content Zn-based alloys are widely used because of the advantages of low cost, saving energy and high quality in the recent years.
高铝锌基合金是近年来应用日益广泛的价廉、节能、优质的新材料。
The influential regulation of rare earth on the properties of spray coating is studied by adding rare earth to the self - fluxing Nickel based alloys powder.
通过在镍基自熔合金粉末中添加微量稀土，研究了稀土对喷焊层性能的影响规律。
Cracking control technology is one of the bottlenecks retarding the wide application and further industrialization of laser rapid forming nickel based alloys.
裂纹控制技术是镍基合金激光快速成形技术广泛应用和进一步工业化的关键。
Nb-based alloys are important high temperature structural materials because of their high melting temperature, corrosion resistance, and high temperature strength.
铌及铌合金以其熔点高、耐腐蚀和良好的高温强度成为重要的高温结构材料。
This paper discussed the influence of the magnetic field intensity H and welding current I on the hardness and the wear resistance of the Co-based alloys surfacing lager.
系统地研究了磁场强度H和焊接电流I对钴基堆焊合金堆焊层硬度和耐磨性的影响，发现当磁场强度H和焊接参数相匹配时，焊缝组织才能获得最佳的细化效果。
Based on experimental results, spectroscopic methods are presented for analyzing spectra of Sn and fe in Ti-based alloys and for identifying different kinds of Ti-based alloys.
根据实验结果，提出了利用看谱镜对钛合金中的锡、铁元素进行光谱分析及牌号鉴别的方法。
This paper introduces an advanced model of coherent precipitation kinetic as well as the development of computer simulation for the microstructure evolution of Ni-based alloys.
介绍了一种先进的共格沉淀动力学模型，以及运用计算机对镍基合金共格沉淀过程组织演化模拟取得的进展。
The fabrication methods and relative properties of semi - solid ferro - based alloys and products were introduced, including cast irons, stainless steels and other alloy steels.
概述了半固态铁基合金及制品的制备方法和相关的性能，包括铸铁、不锈钢和其他合金钢。
The influence of mixed refining agent on the microstructure and mechanical properties of four different Al-containing high aluminum Zn-based alloys at room temperature was studied.
研究了混合细化剂对四种不同铝含量的高铝锌合金室温下组织和力学性能的影响。
In this paper, the current status of research on Nb-based alloys' resistance to high temperature oxidation is reviewed, including recent advances and existing problems in this area.
综述了铌基合金抗高温氧化性研究的现状，并且对铌基合金抗高温氧化性研究的进展及存在的问题进行了阐述，提出了解决铌基合金抗高温氧化问题的可能途径。
Vacuum smelting company, Special casting for the feature, the product of high pure copper casting, high strength, high conductivity copper alloy and wear-resistant copper-based alloys.
公司主要以真空冶炼、特种铸造为特色，产品以高纯铜铸件和高强度、高导电铜合金及耐磨铜合金为主。
The modeling and identification of anisotropic damping property of Ni based single crystal alloys are presented.
研究耐高温镍基合金各向异性阻尼特性的建模与识别。
Some metal alloys, such as those based on aluminum, have low densities and are used in aerospace applications for fuel economy.
某些金属合金，例如铝基合金，其密度低，可用于航空航天以节约燃料。
Based on the total owning cost method, this paper judges the energy-saving economy of amorphous alloys transformer from the view of economy scientifically.
应用总拥有费用法，从经济角度科学地评判非晶合金变压器节能的经济性。
Based on analyses of the structure and composition of sulfide scales, the sulfidation mechanisms of the alloys with different additions have been proposed.
在硫化物锈层组成和结构分析的基础上，讨论并提出了添加不同合金元素的合金的硫化机制。
Based on the good many remarkable properties of them, the bulk amorphous alloys will be applied widely in the future.
基于块体非晶合金具有诸多优良的特性，其必将在社会各个领域得到广泛的应用。
Based on the research in the fabricating ways of the bulk amorphous alloy, the discharge plasma sintering process of the novel bulk amorphous alloys is discussed emphatic ally.
本文通过对块体非晶合金制备方法的研究，重点探讨了新型块体非晶合金放电等离子烧结制备方法。
Exploiting ordered alloys based on intermetallic compounds has important significance. Solving brittleness at room temperature is the key problem.
开发金属间化合物为基的有序合金具有重要意义，迫切的问题是解决室温脆性。
Tungsten based compounds and alloys with high density have become more and more important for the functional materials due to their excellent physical and chemical properties.
钨化合物以及钨基高比重合金由于特殊的理化性能而成为重要的功能材料。
A new kind of boron nitride based shell mold used for investment casting titanium alloys was fabricated and the reaction between it and Ti-Ni alloy was investigated.
研究了一种新型钛合金精密铸造用型壳——氮化硼基复合型壳及其与钛镍合金的界面反应和反应层的形成机制。
A new kind of boron nitride based shell mold used for investment casting titanium alloys was fabricated and the reaction between it and Ti-Ni alloy was investigated.
研究了一种新型钛合金精密铸造用型壳——氮化硼基复合型壳及其与钛镍合金的界面反应和反应层的形成机制。
应用推荐