• Precision ball screw unit is the key part of NC machine, and its manufacturing level determines the precision level of NC machine to great extent.

    精密滚珠丝杠副是数控机床的关键功能部件,其制造水平的高低在很大程度上决定了数控机床的精度高低。

    youdao

  • To determine the ball screw axial compensator range;

    从而确定滚珠丝杠轴向补偿器的量程;

    youdao

  • Germany double nuts automatic ball screw with imported linear guide rail.

    配德国产双螺母自动消隙滚珠丝杆,进口直线导轨。

    youdao

  • The drive system consists of AC servomotor, ball screw and rectilinear orbit etc.

    本传动系统由交流伺服电机、滚珠丝杠及直线导轨等组成。

    youdao

  • Import ball screw and linear guide ensure the repositioning precision machine tools.

    进口滚珠丝杆及直线导轨确保了机床的重复定位精度。

    youdao

  • Japanese ball screw rod and round rail, original screw nut, imported linear and square rail.

    日本产滚珠丝杠,原配螺母,进口直线方形导轨。

    youdao

  • The SDU Series ball screw drive provides precise positioning and high load carrying capability.

    该组系列滚珠丝杆驱动器提供精确定位和高承载能力。

    youdao

  • The stepper ball screw nut has been used in a beam monitor system of Beijing proton synchrotron.

    本文阐述的步进滚珠丝杠副已应用于北京质子加速器的束流测量系统中。

    youdao

  • The following table shows the material composition and heat treating details of a ball screw system.

    下表列出了丝杠部件的材料构成和热处理工艺。

    youdao

  • The NB BG type is a compact single axis actuator, which integrates a slide guide and precision ball screw.

    NB传动模组是一种紧凑型单轴驱动器,其中集成了导轨和精密滚珠丝杠。

    youdao

  • Imported ball screw and linear guide rail have ensured a repeated positioning precision of the machine tool.

    进口滚珠丝杆及直线导轨确保了机床的重复定位精确。

    youdao

  • A structural improvement is implemented on the base of an original ball screw pair and a rolling cone screw pair.

    它在原滚珠丝杆副,滚锥丝杆副的基础上进行了结构改进。

    youdao

  • It includes vertical feed, horizontal feed mechanism design, and servo motor, ball screw options, and other tasks.

    它主要包括纵向进给机构,横向进给机构的设计,及伺服电机,滚珠丝杠的选择等任务。

    youdao

  • Servo motor drives the whole wheel head sliding board (Z1, Z2 axis) doing longitudinal running through ball screw.

    砂轮架滑台移动(Z 1、z2轴)采用伺服电机带动滚珠丝杠、驱动整个砂轮架滑台的方式。

    youdao

  • Rigidity of feed system with ball screw in nc lathe has a major influence on loss of momentum and positioning precision.

    数控车床丝杠进给系统刚度对系统的失动量和定位精度影响较大。

    youdao

  • Applying the microcontroller and the ball screw pair, a transient throttle control system for engine research is developed.

    应用单片机和滚珠丝杠副,研制了发动机瞬态工况试验研究用的油门瞬态控制器。

    youdao

  • High precision, sophisticated ball screw. Backgauge driven by digital ac servo motor, high speed, high precise, precise fix position.

    高精度滚珠丝杆后挡料,AC伺服电机控制,精度高、速度快、定位准确。

    youdao

  • The ball screw can be pre pressed, because the pre pressure can make the axial gap reach negative value, and then get higher rigidity.

    滚珠丝杠可以加预压,由于预压力可使轴向间隙达到负值,进而得到较高的刚性。

    youdao

  • The design of eccentric dressing device of grinding wheel with duplex circular arcs profile is the key to raise the precision of ball screw race.

    双圆弧砂轮偏心修整机构的设计是提高滚珠丝杠滚道精度的关键。

    youdao

  • The drive system is a high precision ball screw drive (maximum spindle speed 3,000rpm) and the user can specify pitch values of 2, 4, 10 or 20mm.

    该驱动系统是一种高精度的滚珠丝杠驱动器(最高转速3000rpm ) ,用户可以指定间距值2 ,4 ,10或20毫米。

    youdao

  • Based on a given ball screw, the effects of each parameter on the axial deformation and driving performance of single-nut ball screw were analyzed.

    以某型号滚珠丝杠副为例,分析了相关参数对轴向变形量和丝杠副传动性能的影响。

    youdao

  • According to Hertz contact theory, this paper discussed the elastic deformation in the ball screw systems and elastic potential energy caused by it.

    根据赫兹接触理论分析了丝杠副滚珠接触的弹性变形量以及由弹性变形所造成的弹性势能。

    youdao

  • In accordance with the requirements of feeding system, the cutting force and the ball screw is calculated, and equipped with appropriate gear and feed motor.

    根据进给系统的要求,对切削力和滚珠丝杠进行了计算,并选配了合适的齿轮和进给电机。

    youdao

  • The round trip is driven by servomotor, matched up with precision ball screw and wire slide rail, to smooth the round trip of the blade and position accuracy.

    行程以伺服马达驱动,配合精密滚珠螺杆及线滑轨,切刀行程顺畅,定位精准。

    youdao

  • In the process of ball screw grinding, the thermal deformation error caused by grinding heat is one of the main error that affect the precision of ball screw.

    在丝杠磨削加工中,由磨削热引起的热变形误差是影响丝杠精度的一个主要误差。

    youdao

  • Brake was installed at the top of the ball screw. When die and punch moved to the right position, the ball screw was stopped at first and then began pressing.

    在滚珠丝杠的端部安装制动器,当凸凹模具运动到位,先通过制动器制动滚珠丝杠,然后再开始冲压。

    youdao

  • The precision and performance index of ball screw unit determine the positioning accuracy and the resetting accuracy of nc machines, especially its lead error.

    它的精度和各项性能直接影响数控机床的定位精度和重复定位精度,特别是滚珠丝杠的导程误差对机床定位精度的影响最为明显。

    youdao

  • The precision and performance index of ball screw unit determine the positioning accuracy and the resetting accuracy of nc machines, especially its lead error.

    它的精度和各项性能直接影响数控机床的定位精度和重复定位精度,特别是滚珠丝杠的导程误差对机床定位精度的影响最为明显。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定