The simple linear relationship between off-axis distance and delay time was also derived in the case of paraxial and remote transmission.
在近轴、远距离传输情况下的离轴距离与延迟时问成简单的线性关系。
For the moment of inertia, we want the square of a distance to the axis of rotation.
至于转动惯量，要求的其实是到旋转轴距离的平方。
The radius from the axis of rotation — - the axis of rotation is here — and the distance from here to here, though you may not think so, is about 15 meters.
半径是这个转动轴-，转动轴在这里-，距离从这里到这里，你们也许想不到，有15米。
Now I'm going to rotate this about this axis-- - it's going around like this-- with an angular velocity omega R and this is at a distance, R.
然后我将使其绕轴旋转-,像这样旋转-,为角速度,这个距离记为。
OK, so moment of inertia about the z axis so, what's the distance to the z axis?
关于绕z轴的转动惯量,到z轴的距离是多少？
This implies that the disturbance increases with distance along the axis of the swirling flow, but it does not grow with time.
这一假定意味着扰动沿涡旋流动的轴向随距离的增长而增长，但不随时间而增长。
Same thing as above, distance to the X-axis, because that is what we care about.
同上所述，到x轴的距离，那是我们想要求的。
3i is just going to go along the x axis but by distance of three instead of one.
3i就是向x轴方向平移,但是平移3个单位，而不是一个。
When the distance between the axis of the inner conductor and the bottom of the trough tends to infinity, the results obtained in this paper go into that of the well-known slab line.
当此槽形线底部与中心圆柱的轴线间的距离趋于无限大时，我们即得到人的所熟知的两平板间具有中心内导体的传输线的结果。
A system of coordinates in which a point is located by its distance and direction (Angle) from a fixed point on a reference line (called the polar axis).
一种用点离基准线上(称极轴)固定点的距离和方向(角度)来表示点位置的坐标系统。
It is obtained by making the track rod a different length to the distance between the king pins (or wheel swivel axis centers).
转向横拉杆的长度同主销间的距离不相等，就可保证各前轮以期望的角度旋转。
With the similarity theory and dimensionless analysis method, the relation and corresponding dimensionless relation of the distance between the point of primary breakup and the axis are given.
在此基础上，利用相似性理论和无量纲分析，获得了运动状态下液体轴对称抛撒首次破碎点与对称轴之间的距离与相关参数的无量纲关系式。
Then, the effective distance expression of angular spectrum along optical axis has been introduced by comparing this equation with the free propagation equation.
接下来，将此传输方程与光在自由空间的传输方程相比较，引入了角谱轴向传输的等效距离公式。
The distance of the contour from its axis of rotation continuously varies through alternating maxima and minima.
这是自其旋转轴轮廓的距离不断变化，通过交替极值。
This paper summaries the researches on the application of the technology of image analysis, distance transformation and medial axis transformation, to the field of computer graphics.
本文是将图像分析技术—距离变换与中轴变换—应用于计算机图形学领域研究工作的一个总结。
As indicated by results of analysis, the dimension of trapped object and its distance away from axis are the principal factors influencing axial inclination force.
分析结果表明，捕控对象的线度和离轴距离是影响归轴力的主要因素。
A distance that characterizes how far a logging tool measures into the formation from the axis of the tool or borehole.
表征测井仪器可探测到的从仪器或井轴到地层之间的一段距离。
Moreover, applying the matrix method in the close axis optics leads directly to the expression of the focal distance of magnetic lens if the matrix is transmitted by the lens.
此外，应用类似于近轴光学中的矩阵方法，山磁透镜传输矩阵，直接导出了该磁透镜的焦距的表达式。
When calculating service probability of anti-aircraft to high velocity targets by method of Monte Carlo, targets should been regarded as Poisson Stream on axis of distance.
用模拟法计算防空武器系统对高速目标的服务概率时，为体现目标速度对系统服务概率的影响，应当把目标流看成是距离轴上的泊松流。
Collecting the distance axis projection, this algorithm not only work well when the target has the scale change or rotation, but also has the low operation cost.
另外新算法结合了变换图目标区域的轴向投影统计策略，保证了匹配运算量的降低；
The action of the stress on the wall induced by drop motion is restricted in an area near the symmetric axis, which increases when the initial stand-off distance increases.
上的应力的作用，逐滴运动诱导的壁附近的对称轴的区域中，从而增加了当初始放置过的距离的增加被限制。
Standoff distance is refers to the lowest point of sensor's distance to the center of the Z axis capture range.
相隔距离是指传感器的最低点到Z轴捕获范围中心的距离。
When the distance of two nozzles was fixed, the offset of impinging stagnation point on the axis increased with the ratio of velocity and the nozzle diameter.
当喷嘴间距一定时，轴线撞击面驻点偏移量随气速比和喷嘴直径的增大而增大。
With respect to their distance to the main coil axis (37), these electric conductors (41) are positioned at a relatively short distance from each other.
相对于它们距主线圈轴（37） 的距离，这两个导电体（41）放置成彼此相距较短的距离。
Field data were analyzed. It showed that axis force increased along with pipe jacking at the very start, and it maintained stated basically when jacking to a certain distance.
实测数据分析表明，管节开始顶进时轴力随顶进距离增大而增大，顶进到一定距离后，基本维持在一定范围内。
A novel method is proposed to calculate the minimum distance from tool to free-form surface, to solve tool interference problem in 5-axis nc sculptured surface machining.
提出了一种求解曲面到刀具极值距离的方法，以解决曲面5轴数控加工中刀具与曲面的干涉问题。
Elementary Elastic bending theory requires that bending stress varies linearly with distance from the neutral axis, but plastic bending shows a more accurate and complex stress distribution.
基本弹性弯曲理论要求弯曲应力均随到中性轴的距离而线性变化，但塑性弯曲理论揭示了一个更加精确的和复杂的应力分布。
Elementary Elastic bending theory requires that bending stress varies linearly with distance from the neutral axis, but plastic bending shows a more accurate and complex stress distribution.
基本弹性弯曲理论要求弯曲应力均随到中性轴的距离而线性变化，但塑性弯曲理论揭示了一个更加精确的和复杂的应力分布。
应用推荐