A shaft in the box and a box cover wheel without axial or radial clearance is another factor to move, should refer to a box of round renovation measures.
条轴在条盒轮与条盒盖间无轴向或径向间隙是转动不灵的又一因素，应参照条盒轮的整修办法进行。
This paper presents the parametric equations on stress concentration factor(SCF) of completely overlapped tubular joints under axial loading using experimental and numerical analysis.
通过试验和数值研究推导了完全叠接管节点试件在轴向力作用下应力集中因子的参数方程。
It is found from the analysis under special situation that the large axial load had obvious effect on dynamic interaction factor of group pile.
通过分析表明，在轴向力作用较大的情况下，动力相互作用因子的影响较为明显。
Then analyze, fill pump to Model 63cy14-1b axial column what place need improvement, and place these with what factor have something to do, unite.
然后，分析对于63cy 14 - 1b型轴向柱塞泵哪些地方需要改进，而这些地方又与哪些因素有关联。
Based on the reduced scale ring rolling and finite element simulation materials axial transferring pattern was studied and a formability evaluation method was proposed including the shape factor.
摘要研究了大型复杂环件形状因素和轧制速率对成形性能的影响规律。
The axial overload is the main factor which causes work roll bearings and back-up thrust bearings of four-high mill invalid.
四辊轧机工作辊轴承和支承辊止推轴承失效的主要原因是它们在工作中所受的轴向载荷过大。
The corrosion characteristic, causes and laws of pipe connection bands are extensively studied, which shows that a sharp change of stress is the critical factor for corrosion, especially axial stress.
笔者对接箍腐蚀的特点、原因和规律等问题开展了研究。结果表明，应力突变是发生腐蚀最关键的原因，特别是轴向应力占主导作用。
Axial compression ratio is the mainly factor that can impress capability of the steel reinforced column. When the axial compression ratio has changes different destruction be can happen.
轴压比是影响其受力性能的主要因素，当轴压比不同时可能会发生不同的破坏，为了避免发生脆性破坏，在设计时就会出现柱截面很大的情况，在高层结构尤甚。
The axial ct subtraction angiography with subtraction factor 0.8 and color enhancement technique could keep the ventricles on the background.
而减影系数为0 . 8伪彩色增强彩色轴位CT减影血管成像可以保留脑室等解剖背景。
The stress distribution and the stress concentration factor in the welding region of tubular TT-joints subjected to axial loads are analyzed using finite element method in this study.
本文首先通过有限元分析得到了轴力作用下的TT管节点在焊接区的应力分布以及应力集中系数。
Based on the reduced scale ring rolling and finite element simulation, materials axial transferring pattern was studied and a formability evaluation method was proposed including the shape factor.
研究了大型复杂环件形状因素和轧制速率对成形性能的影响规律。
Based on the shape factor and the effective Poisson ratio an effective method to transform from lateral strain of funnel-like specimen to axial strain of standard specimen is developed.
基于形状因子与等效泊松比的原理，建立了——漏斗型小试样径向应变向轴向应变换算的等效方法。
The essence of secondary axial force and influential factor is presented.
阐述了预应力次轴力的本质，分析了影响次轴力的因素。
Influence of each factor on blade inlet flow of a large vertical axial-flow pump is analyzed, formation mechanism of flow field in the cross section is studied.
分析各因素对大型立式轴流泵叶片进口流态的影响，研究该断面流场的形成机理。
The axial overload is the main factor which causes work roll bearings and back up thrust bearings of four high mill invalid.
四辊轧机工作辊轴承及支承辊止推轴承失效的主要原因是轴向力过大。
To obtain a fixed set with the basic rating life of the corresponding radial axial dynamic load, or the basic dynamic load rating for equivalent dynamic load correction factor.
为了得到与给定额定寿命相应的基本额定径向动负荷或基本额定轴向动负荷，适用于当量动负荷的修正系数。
From the analysis of the experiment results, it is indicated that the axial load ratio on behaviors of CFST subjected to compression-bending loads is the most significant effect factor.
对试验结果进行的分析表明，轴压比对钢管混凝土弯压构件受力性能的影响最为显著。
According to the results by the finite element method, the factor of safety calculated by axial loading stress-strain model is less than the factor of safety by lateral unloading stress-strain model.
依据有限元西安理工大学硕士学位论文法分析，轴向加荷应力路径模型确定的安全系数较围压卸荷应力路径模型确定的安全系数小。
According to the results by the finite element method, the factor of safety calculated by axial loading stress-strain model is less than the factor of safety by lateral unloading stress-strain model.
依据有限元西安理工大学硕士学位论文法分析，轴向加荷应力路径模型确定的安全系数较围压卸荷应力路径模型确定的安全系数小。
应用推荐