This paper introduces the new design of seals for cam grinder's axial end or revolving spindle in dry gas containing particulate matter.
文章介绍了一种在干燥、含固体颗粒气体介质条件下旋转轴密封的新设计。
This makes it possible to analyze the effect on gear mesh of such factors as gear box deformation, axial end loading and axial deflection, etc.
用这种方法可以分析多种外界因素对齿轮啮合的影响，如箱体变形、轴端受力、轴线挠曲等；
Now commonly used servo motor is ac servo motor, the axial end in motor with photoelectric encoder, by examining the rotor Angle to frequency conversion control.
目前常用的伺服电机是交流伺服电机，在电机的轴端装有光电编码器，通过检测转子角度用以变频控制。
According to the regulation of axial stress distribution, a way to design the rational end construction is given.
根据端部所呈现的应力分布规律，提出了确定端部合理结构型式的方法。
The method of lifting the precision of axial spare parts by using hydraulic auto top end is introduced. It has made good result.
介绍了采用液压式自动顶尖，提高轴类零件加工精度的方法，并收到了良好效果。
The experimental results show that both the failure modes and crack position of the tubes under axial compressive load changed when the end of the composite tubes are strengthened.
结果表明，复合材料圆管端部加强后，其轴压破坏模式和破坏位置都发生了改变。
This system can be used to study the plasma accumulation and heating, potential shielding and electrostatical end plug of axial symmetric tandem mirrors.
该装置将开展等离子体积累与加热、电势屏蔽、静电堵漏轴对称串级镜端塞的研究。
Finally, the total loss distribution along the blade span of the axial flow compressor is estimated according to an improved end wall loss model and a shock loss model.
再应用改进了的端壁损失和激波损失模型，最终算出轴流压气机设计点损失沿叶高的分布规律。
The motor is characterized in that a revolution surface circling around the rotating shaft is connected with an axial outer end of the inner fan blade.
其特征在于，所述内风扇叶片的轴向外端连接于一环绕所述转轴的回转面。
In the geometry modeling of ball end mill cutter, consideration of cusp effect of ball milling, accurate cutting Angle range corresponding to different axial cutting depth are deduced.
在球头铣刀几何建模中，考虑铣刀残余高度的影响，推导了不同轴向切深时对应的切入角与切出角范围。
This technology uses a high-speed multiphase helico axial pump end and hydraulic turbine driver powered by topside-located conventional water injection systems.
该技术使用高速多相螺旋轴流式泵端及液压涡轮传动装置，并由位于上部的常规注水系统驱动。
In the past, in all the calculations of nonlinear response of thin cylindrical shell under axial dynamic load, the effect of mass at the loading end of the shell was neglected.
圆柱薄壳受有轴向动力载荷作用的非线性响应计算中，以往忽略载荷作用端质量的影响。
A new model is presented for calculating the end-wall boundary layer and its blade force defect inside the axial compressor cascade, based on theoretical analysis.
通过理论分析提出一种考虑叶片端部间隙影响的叶片力亏损模型，并对三种轴流压气机叶栅的端壁边界层及叶片力亏损进行了数值计算。
In order to reduce the axial vibration strength, the coned angel of end face should get its smaller value, and try to avoid the turning radius get the intermediate values of optional range.
若要减小轴向的振动强度，就须减小端面锥角，且尽量避免取转折半径可选范围的中间值。
The dynamic buckling of elastic structures, such as beams and plates, when subjected to an axial impact at one end, is studied in the present paper based on the theory of stress wave propagation.
本文借助于应力波传播规律研究了弹性梁板结构在冲击载荷作用下的动态屈曲问题。
In the end, the failure property of short axial compression columns strengthened by FRP was discussed, and so was the choosing method of index values for strengthening design.
最后文章还讨论了纤维包裹加固柱的破坏性质和抗力设计指标等取值问题。
The circular arc gear drive is one kind of axial conjugate gear drive which meshes in points. The movement transmission depends contact mark along the end motion to realize.
圆弧齿轮传动是一种轴向共轭、点啮合制的齿轮传动，运动的传递依靠接触迹沿轴向移动实现。
The cage frame is in a column shape, and is made of a wire, and can also be folding or extended in axial direction. An end part is fixed with a circular arc-shaped permanent magnetism strip.
笼框为圆柱形，由金属丝制成并可轴向压叠或伸展，其端部安装固定有圆弧形永磁条。
Recycle tubular reactor model with axial dispersion leads to a special boundary value problem, in which one boundary condition involves the values at two end points.
一种循环管式反应器的扩散模型，归结为一类特殊的边值问题，其特点为两个端点的函数值出现在一个边界条件中。
The stability of the end slopes, i. e. concave slopes has been analysed with modelling and by means of the finite element method in axial symmetry system.
对该矿的端帮，即平面凹形边坡的稳定性用滑坡模型试验及有限元法进行了分析。
The tube silencers 23 have open end portions arranged to face the fan and the silencers of the first set 18 are spaced from the silencers of the second set 24 in both axial and radial directions.
管道消音器(23)具有敞开端部，其被设置为面对风扇，并且第一组(18)的消音器与第二组(24)的消音器沿轴向方向和径向方向分隔开。
The vibration model of ball end milling process considering the effect of cutter flexibility is presented. The influence of the axial force on the inherence frequency of the cutter is studied.
建立了考虑刀杆柔性的球头铣刀铣削振动模型，探讨了交变轴向力对刀杆固有频率的影响。
The Machinery Factory is specialized in the production of Heading Machine, Thread Rolling Machine, Nail Making Machine, Slotting Machine, End Cutting Machine and Axial Machinery for toys.
专门从事打头机、搓丝机、打钉机、割槽机、割脚机、空心钉机和玩具轴类机械的生产。
The Machinery Factory is specialized in the production of Heading Machine, Thread Rolling Machine, Nail Making Machine, Slotting Machine, End Cutting Machine and Axial Machinery for toys.
专门从事打头机、搓丝机、打钉机、割槽机、割脚机、空心钉机和玩具轴类机械的生产。
应用推荐