Fiber model beam-column elements are presently one of the most practical and efficient element models handling biaxial bending and variable axial force coupling problems of frame structures.
纤维模型梁柱单元是目前处理空间杆系双向弯曲与变轴力耦合问题最为实用有效的单元分析模型。
Combining with three nodes isoparametric axial force element, the new element can be used to accurately calculate the shear flow action between bar and skin in thin-wall structure.
它与三节点等参轴力杆单元组合时可以精确地模拟薄壁结构中杆与蒙皮之间的剪流作用。
LINK8 element is used to model the steel reinforce bar except in the wall. LINK8 can only transfer axial force and has no volume.
除剪力墙中的钢筋本文模型中其他纵筋采用LINK8单元模拟，该单元只传递轴力且没有体积。
In this paper, a improved geometric stiffness matrix of a column element considering axial force-lateral displacement effects is derived.
本文推导了柱单元受大轴力和单元变形过大两种情况下的单元几何刚度矩阵。
MRI is a noninvasive technique that can also define vertebral slippage and neural element compression through cross-sectional axial and sagittal imaging.
MRI是一种非侵入性技术，它能通过轴向横截面及失状位成像明确椎体滑移以及神经结构受压情况。
The relation between load and deformation of the spring element is analysed and the calculating methods of constant angle and maximum axial load are set up.
本文研究了自动调心分离轴承装置的结构和调心原理，分析了弹性元件载荷与变形的关系，给出了分离轴承接触角和极限轴向负荷的确定方法。
Using the finite element method, the dynamic buckling of a bar with finite initial imperfection under axial impact is analyzed in this paper.
本文用有限元方法分析了一定初缺陷杆受轴向冲击的弹塑性动态屈曲。
Based on theories of computational fluid dynamics and heat transfer, an axial symmetry finite element model of velocity and temperature field of spot welding for aluminum alloy is established.
根据计算流体力学与传热学原理，建立了描述铝合金电阻点焊液态熔核流动行为和传热过程的轴对称有限元模型。
Finite element method was used to analyze the J integral evaluation method for a cylindrical specimen with deep circumferential crack under axial or torsional load.
通过有限元解析方法分别研究了轴向或扭转载荷下带环状裂纹圆棒试样的J积分的评价方法。
A kind of mixed-order vector finite element method for axial-symmetric cavities is introduced.
介绍了一种用于分析轴对称谐振腔的混合阶矢量有限元法。
The stress distribution and the stress concentration factor in the welding region of tubular TT-joints subjected to axial loads are analyzed using finite element method in this study.
本文首先通过有限元分析得到了轴力作用下的TT管节点在焊接区的应力分布以及应力集中系数。
For the dynamic behaviour of piles, a beam-column element was used for considering the axial force-dependency as well as the volume effect.
对于桩的动力本构行为，则采用了可以考虑体积效应和轴向力影响的梁—柱单元来模拟。
The full-range curve of reinforced concrete members with flexure and axial loads is obtained by finite element method.
用有限元法对钢筋混凝土压弯构件进行了荷载一位移曲线的全过程分析。
In order to solve the eccentric worn problem of tubing, deformation finite element simulation of the eccentric worn tubing was carried out with ANSYS software under internal pressure and axial load.
为了解决油管偏磨问题，对内压和轴力作用下的无偏磨、单面偏磨和双面偏磨油管分别进行了有限元(AN - SYS软件)模拟研究。
With the theory of finite element method, the simulation calculation is conducted for the axial pressure distribution law, the leakage rate and the pressure variation of the seal rings.
利用有限元法理论，对密封圈的压力沿轴向的分布规律、泄漏量与压力变化关系进行了模拟计算。
The billet deformation behavior, the magnitude and distribution of effective strain and damage value were investigated by rigid-plastic finite element method during multi-axial compressions.
采用刚塑性有限元法研究了多轴压缩过程中的坯料变形行为、等效应变大小、分布以及损伤值。
The procedure and results of a finite element analysis on the oil distributing plate of an axial piston pump are introduced.
本文介绍了对轴向柱塞泵配油盘进行有限元分析的方法和结果。
A finite element analysis is presented for predicting local buckling stresses in stiffened plates under axial compression.
本文给出了轴压加筋板局部屈曲应力的有限元分析。
The biomechanical parameters of 9 finite element models were measured under axial compressive load within physiological range.
生理压缩载荷下，分别对9种有限元模型的生物力学参数进行测试。
Based on the reduced scale ring rolling and finite element simulation materials axial transferring pattern was studied and a formability evaluation method was proposed including the shape factor.
摘要研究了大型复杂环件形状因素和轧制速率对成形性能的影响规律。
Finite Element Method is used to calculate the maximum bending moment and axial force of lining and its deformation.
利用有限元法计算了考虑衬砌接头和不考虑衬砌接头两种情况下衬砌的内力和衬砌的变形。
First, an axial flux motor is designed by using the FEMLAB finite element analysis software. Furthermore, a prototype axial flux motor is manufactured.
首先本计画运用FEMLAB有限元素分析软体，进行轴向磁通永磁同步車毂马达的电脑辅助设计与分析，并实际制作一个轴向磁通的雏形马达。
Eigenfrequencies of high order modes in the axial-symmetric cavities are computed with a vector finite element method.
采用矢量有限元方法计算了任意轴对称谐振腔高阶模的本征频率。
Using three dimensional linear viscoelasticity finite element model, numerical simulation was performed. The deformation of solid propellant grain under axial acceleration was investigated.
并运用三维线性粘弹性有限元模型，对离心实验过程进行了数值模拟，以确定固体推进剂药柱在轴向过载作用下的变形问题。
ANSYS software is used to design the axial compensator using the static electromagnetic field finite element analysis is carried out.
使用ANSYS软件对设计的轴向补偿器采用静态电磁场进行了有限元分析。
It is shown that due to the presence of axial thrust and the gradual cracking of the section, a plain concrete element can deform significantly without losing its flexural strength.
论证了由于板中存在推力以及截面的逐渐开裂，素混凝土构件能显著变形而不(？)其承载能力。
According to the hydromechanics and the elasticity theory established axial flow pump's fluid - solid coupling finite element equation.
根据流体力学和弹性力学建立了轴流泵的流-固耦合有限元方程。
Design parameter analysis for the joints is carried out through finite element method so as to find out the influence of diaphragm thickness, extend length, axial compression ratio on joint behavior.
进行了节点参数分析，通过有限元数值计算，掌握了隔板厚度、挑出长度及轴压比对节点性能的影响规律。
Design parameter analysis for the joints is carried out through finite element method so as to find out the influence of diaphragm thickness, extend length, axial compression ratio on joint behavior.
进行了节点参数分析，通过有限元数值计算，掌握了隔板厚度、挑出长度及轴压比对节点性能的影响规律。
应用推荐