This will be required to accommodate the assembly requirements at the semi and finished levels.
这将需要容纳大会要求在半决赛和成品的水平。
But repair value must meet the requirement or restriction from assembly requirements of close-chain.
为了满足封闭环的装配要求，修配量应当有一个极限值。
Does the assembly area have sufficient resource and tooling to ensure assembly requirements are met?
组装区是否有足够资源和工具以保证达到组装要求？
Ensure quality by ensuring that business requirements drive the modeling and assembly of services that automate and integrate business processes.
通过确保业务需求推动自动化并集成业务过程的服务的建模和组装，来确保质量。
This assembly composes and choreographs the services according to the business requirements to provide a method for the Purchasing service.
这种集合根据业务需求来合成和设计服务，为Purchasing服务提供一种方法。
Now that the services are all provided by some provider, we are ready to use these providers in an assembly that fulfills the original business requirements.
现在，服务已全部由一些提供者提供，我们已经准备好将这些提供者集合起来使用，实现最初的业务需求。
We have 65 type extruder head for example, known as the head assembly size, design requirements, die die sleeve.
我们以65型挤出机机头来举例，已知机头装配尺寸，要求设计模芯、模套。
Train and instruct operators in assembly procedures and quality requirements.
培训和指导操作员装配程序和质量要求。
We use this in Fabric3 to analyze an assembly and determine the middleware requirements of a service and dynamically provision runtime infrastructure accordingly.
我们使用Fabric3中的该特性对装配进行分析，确定服务的中间件需求，并且动态地提供相应的运行时基础设施。
The main bridge type crane, the erection and assembly has strict technical requirements, and a set of measurement methods to measure the installation result strictly.
桥架式桥式起重机的主体，其架设和组装都有严格的技术要求，并有一套严格的测量方法来测量安装结果。
From injection molding, stamping to assembly, testing every process has strict quality requirements and personnel.
从注塑、冲压到装配、检验每个工序都有严格的品质要求及专人把关。
For fabrication, a thin film process of high density routing and multi-chip assembly is adopted to meet the performance and structure requirements.
在制作上，根据性能和结构要求，采用了高密度布线、多芯片组装的薄膜工艺。
The assembly service life is lifted by over 5 times to meet the requirements of complex working condition in mountain areas.
总成寿命可提升5倍以上，足以满足山区等复杂工况的使用要求。
There are no bearings to fail or requirements for flexible couplings because its magnetized drum assembly is attached directly to the shaft.
没有轴承失败或弹性联轴器的要求，因为它的磁化鼓大会直接连接到轴。
From injection molding, stamping to assembly, inspection of each process has strict quality requirements and hand check.
从注塑、冲压到装配、检验每个工序都有严格的品质要求及专人把关。
Respiratory protective devices - Compressed air line breathing apparatus for use with a full face mask, half mask or a mouthpiece assembly - Requirements, testing, marking.
呼吸保护装置。与全罩式面罩、半罩式面罩或口罩一起使用的压缩空气导管呼吸装置。要求、试验和标志。
The Throttle body assembly shall meet all performance requirements listed herein at the normal operating conditions.
在正常操作条件下，节气门体总成必须满足本文所列的所有性能要求。
The test results indicate that the throttle body assembly can meet the durability and reliability requirements of motorcycle.
试验结果表明节气门总成能够满足摩托车对耐久性和可靠性要求；
The process oriented virtual assembly process planning system brings forward new requirements for the assembly process model.
面向过程的虚拟装配工艺规划系统对装配工艺模型提出了新的要求。
This paper described work principle and structure design of side cut punch composite mold and assembly testing requirements using the crank press machine.
介绍了在曲柄压力机上切边冲孔的复合模结构设计、工作原理及装配和调试要求等。
The paper gives a new method for computer aided process tolerance design which considers production cost and quality loss cost and assembly function requirements.
本文提出了考虑加工成本、质量损失成本、装配件的装配性能要求等的一种工序公差设计的新方法。
The safety bolt's data form and management requirements in car assembly are introduced in this paper and the transmissive methods of indirect and direct on line are applied.
本文介绍了轿车装配中螺栓的数据格式和管理要求，以及采用简接上网和直接上网的传送方式。
A general usage AT89C51 type single chip machine system is designed based on the special requirements from robot screw flexible assembly pose detection.
针对机器人螺钉柔性装配位姿检测的特殊要求，设计制作了通用型at89c 51单片机系统。
In contrast to the traditional CAPP system, this system is more able to meet the assembly enterprises' requirements in any application field.
与传统CAPP系统相比，该系统更能满足装配型企业各应用层次对CAPP的需求。
Expert assembly and build teams work throughout the final crucial stage of the design with the aim of satisfying at best both the client's and the designer's requirements.
为了满足客户和设计师的要求，专业的组装和建造队伍参与最后的关键设计阶段。
To satisfy customized requirements on assemble product design, a new assembly variant design methodology was proposed based on the modification of existing mature component designs.
为了获得满足顾客个性化需求的装配产品设计方案，提出了通过修改现有成熟零件的设计的变形设计方法。
The side of the cabinet USES the rivet this kind of new technique, no welding and assure the assembly precision and also meet the requirements of environmental protection.
柜体边接采用拉铆新工艺，无需焊接，确保装配精度，且符合环保要求。
The structural strength of the cast-in-place and assembly concrete can change with time. There are corresponding requirements for the concrete strength in different construction stages.
现浇或装配式混凝土结构强度随时间而变化，不同施工阶段对混凝土强度都有相应的要求。
In order to realize the detection accuracy of the system requirements, theline laser was used as the light source, and the 0.5〃 Lycra theodolite and micrometer were applied todetect the assembly.
采用一字线激光器作为光源，通过0.5＂莱卡经纬仪和千分表进行检测，达到系统要求的检测精度。
In order to realize the detection accuracy of the system requirements, theline laser was used as the light source, and the 0.5〃 Lycra theodolite and micrometer were applied todetect the assembly.
采用一字线激光器作为光源，通过0.5＂莱卡经纬仪和千分表进行检测，达到系统要求的检测精度。
应用推荐