Introduces intelligent lighting network system, and sets forth the design of intelligent lighting controller based on ARM microcontroller LPC2104 in detail.
简单介绍了网络化的灯光控制系统，具体阐述了以ARM微控制器LPC 2104为核心的智能灯光控制器的设计。
The EP7312 is mainly relying on its ARM microprocessor chip LCD controller and its powerful processing capability, responsible for the completion of the ECG filtering, analysis and display functions.
EP7312 ARM微处理器则主要依托其片内液晶控制器和其强大的处理能力，负责完成心电信号的滤波、分析和显示等功能。
By comparing the capability of traditional LED lamplight controller with that of ARM processor and FPGA reconstruction, it indicates the advantage of using ARM and FPGA technology.
接着通过比较传统灯光控制器的性能和经过ARM处理器和FPGA技术改造的控制器的性能，指出了使用ARM处理器结合FPGA技术进行灯光控制器设计的优势。
This paper applies ARM into the intelligent household appliance controller to solve this question.
本文通过采用ARM构成智能家居控制器来实现这个目标。
In this paper, a new kind of continuous reactive power compensator which is based on soft switching was introduced and a ARM-based controller was designed.
介绍一种新型基于软开关投切技术的连续无功补偿方案，并设计出适用于该方案的基于ARM嵌入式微处理器的无功补偿控制器。
The ARM system on the part of the ARM plus DSP controller will be discussed in this thesis.
本文主要研究的是ARM加DS P可重构控制器的ARM系统的部分。
When all joints driven in the same way, the robot arm reach the designed position and attitude, and it end effector performs its jobs as the controller instructs it.
当所有的关节都用该方法驱动，机器人就可以达到所希望的位置和姿势。且终端执行机构就如控制器所指示的那样工作。
In this paper, a new kind of continuous reactive power compensator based on soft switching is introduced and an ARM-based controller is designed.
介绍一种新型的基于软开关投切技术的连续无功补偿装置，并设计出适用于该方案的基于ARM嵌入式微处理器的无功补偿控制器。
The design of a fireworks display control circuit is based on the ARM S3C2440 controller, the CAN bus communication technology and Embedded technology.
利用ARM S3C 2440微控制器、网络通信技术和嵌入式技术设计烟花燃放控制电路。
A dynamic sliding mode controller is devised to achieve output tracking of the mobile manipulator that consists of a mobile platform which has two driving wheels and a two-link manipulator arm.
本文针对由二轮驱动的移动平台和二连杆机械臂组成的移动机械臂的输出跟踪问题，利用滑模控制原理为其设计了动态滑模控制器。
Computer is used as digital controller in control system of three-freedom degree digital machine arm based on BP algorithm, and potentiometer measures position of hoist and up-down pendulum Angle.
基于BP算法的三自由度数字式机械臂系统控制用计算机作数字控制器，电位计测量车位置、上下摆角度。
This paper presents a high performance 7-axis controller developed, with the cores of ARM and FPGA.
讨论了一种采用ARM处理器及FPGA设计的7轴电动机伺服运动控制器。
This paper explains the hardware design of the Embedded Audio controller and initializing code of the LPC2214 ARM microcontroller in detail. Besides, I wish to share the experience in debugging.
论文主要阐述了嵌入式音频控制器的硬件设计，另外还详细分析了LPC 2214ARM微控制器的芯片加密及启动代码，并将在调试过程中总结的经验与大家分享。
Intelligent lighting network system was introduced, with emphasis on the design of intelligent lighting controller based on ARM microcontroller LPC2104.
介绍了网络化的灯光控制系统，具体阐述了以ARM微控制器LPC 2104为核心的智能灯光控制器的设计。
For the requirements of the system, a controller, whose kernel is ARM, is designed. The controller design includes hardware design and software design.
针对温度模拟系统对控制器的要求，提出了以ARM为核心的温度控制器的设计方案，并进行了硬件设计及软件设计。
In terms of hardware, according to the special requirements of the working environment, the project use the ARM processor as the main controller, and use monochrome LCD.
硬件方面，根据编组站工作环境的特殊要求，课题采用了ARM处理器作为主控制器，并采用单色LCD作为显示单元。
This paper presents a new type of continuous reactive compensator based on a soft switching technique and the design of an ARM-based controller.
介绍一种新型的基于软开关投切技术的连续无功补偿装置，并设计出适用于该方案的基于ARM嵌入式微处理器的无功补偿控制器。
This thesis designed a robot controller based on ARM core chip, S3C2440. S3C2440 is the least product of Samsung Electronics;
本论文设计了基于ARM内核芯片，S3C2440，的机器人运动控制器。
The controller sends signals to the power source to move the robot arm to a specific position and to actuate the end effectors.
控制器负责发送信号给动力源并驱使机器人手到达准确的位置，激活终端操作机构的运行。
The optimal proposal realizes the hook-falling speed control through the arm head controller and the speed sensor.
优选方 案通过臂头控制器和速度传感器来实现落钩速度控制。
In addition, space for placing the bone fragment is left between the connecting arm, the inserting needle controller and the orifice positioning needle.
另外在连接臂、进针控制器和出孔定位针之间要留有放置骨块的空间。
In this paper, a state feedback controller is developed to control a one-link flexible robot arm.
本文用状态反馈方法对单连杆弹性手臂进行了控制实验。
Ultrasonic wind velocity measurement with time-difference method and wind velocity measurement system based on ARM micro-controller were introduced.
介绍了超声波时差法风速测量的基本原理，以及基于ARM微控制器的风速测量系统的实现方法。
This paper designs a hierarchical controller for dual-arm robot to pole-in-hole insertion.
设计了双臂协调进行轴孔装配的分级控制器。
The embedded test system is designed based on ARM micro-controller according to the integration of bionic navigation system.
针对仿生导航系统集成化的需要，设计了基于ARM的嵌入式测试系统。
This paper interprets the means of the development of the preset unit of TCSC Test Controller with ARM microprocessor, embedded real time operating system and the USB technique.
本文采用ARM处理器技术、嵌入式实时操作系统技术和通用串行总线(usb)技术来完成TCSC实验系统控制器前置单元的实际开发。
In this paper a new arm-driven inverted pendulum is presented, and a 4-input 1-output 3-layer BP neural network is designed to approach the first-level arm-driven inverted pendulum controller.
本文针对一种新型的倒立摆系统，设计了一个四输入单输出三层BP网络，并对一级旋转倒立摆控制器进行逼近。
The teaching and playback functions of mechanical arm are realized on the basis of Siemens S7-200 programmable logic controller.
提出一种基于西门子s7- 200可编程控制器实现机械手运动的示教与再现功能的设计方法。
In this design, ARM is the action-controlling unit, high-speed micro-controller is the human-computer interaction unit.
该设计采用ARM处理器作为运动控制单元，高速单片机作为人机交互控制单元。
In this design, ARM is the action-controlling unit, high-speed micro-controller is the human-computer interaction unit.
该设计采用ARM处理器作为运动控制单元，高速单片机作为人机交互控制单元。
应用推荐