Continuing with the topic of embedded systems, Greg asked about the current furor over the state of the ARM tree.
继续嵌入式系统的话题。格雷格问了关于最近对于ARM内核的争吵。
Codezero was also designed specifically for embedded systems and supports multicore processors as well as ARM-based designs.
Codezero还专门针对嵌入式系统设计，支持多核处理器和基于ARM的设计。
Based on the fully analysis of old system, this paper proposes an entirely new solution which is based on ARM embedded system.
本文在充分分析现有系统的基础上，为变电站防误系统提出了基于ARM嵌入式系统的全新解决方案。
ARM instruction set, introducing a wide range of ARM instruction, whether for beginners or people proficient in embedded systems would be good information manual.
ARM指令集，介绍各种ARM指令，无论对于初学者还是精通嵌入式系统的人都将是不错的资料手册。
After investigation of the design of current queue management system, a new design of the queue management system for ARM is described.
就目前排队管理系统的设计进行了调查研究，设计了一种基于ARM的嵌入式排队管理系统。
Remap is a very important concept in the ARM embedded software development, it is also a key step in system initialization process.
重映射是ARM嵌入式软件开发中一个非常重要的概念，它是系统初始化过程中一个重要的环节。
The intention of this paper is to design a multi-functional data generator whichbased on ARM embedded systems.
本论文的目的，是研究和设计基于ARM嵌入式系统的多功能数字信号发生器。
In the embedded system experiment, it is crucial to be familiar with architecture of ARM and embedded operating system.
在嵌入式系统实验中，了解ARM的体系结构、熟悉嵌入式操作系统是关键。
This paper introduces a new type of ultrasonic dental descaler measuring system based on ARM embedded technology.
介绍一种新型的基于ARM嵌入式技术开发的超声洁牙设备检测系统。
In the section of the hardware design, the embedded platform consisted of ARM processor is used in this project.
在硬件设计中，本课题采用了基于ARM处理器组成的嵌入式系统平台。
This paper puts up an idea of a unlocking structure based on ARM-LINUX, which can real-timely monitor DTMB and CMMB system after changing the receiving-demodulating module correspondingly.
本文提出了一种基于嵌入式ARM的开放性结构，在改变相应的信号接收解调模块后，可以实现对DTMB、CMMB等系统的实时监测。
This paper introduced a new type of ultrasonics dental descaler measuring system based on ARM embedded technology.
介绍一种新型的基于ARM嵌入式技术开发的超声洁牙机检测系统。
The widely use of airless digital communication, ARM technology, automation technology and network makes the possible achievement of digital, modularize and real time program control system.
无线数字通信技术、嵌入式技术、自动控制技术和网络技术的广泛应用，使得实现程序控制系统的数字化、模块化、实时性成为可能。
This subject has realized an embedded system with WEB SERVER based on ARM chip and embedded operating system.
本课题实现了一个基于ARM芯片和嵌入式操作系统的带有WEBSERVER的嵌入式系统。
System of locomotive bearing fault diagnosis based on ARM embedded System was introduced.
介绍一种基于ARM嵌入式系统和机车轴承诊断系统。
To solve the problem, a new embedded machine vision system is proposed, which takes the USB camera as the image acquisition unit and ARM as central processor.
针对此问题，本文设计了一个以USB数码摄像头为图像采集设备、ARM为核心处理器的嵌入式机器视觉系统。
In the paper, it induces the principle of how to choose types of embedded system hardware platform, and mainly compare and analyze different types of ARM processor. It gives example to test.
本文主要介绍嵌入式系统硬件平台的选型原则，并着重对ARM处理器的选型进行分析与比较，同时给出实例进行验证。
The microprocessor LPC2210 with the ARM kernel is introduced, and the Ethernet-controlled chip RTL8019AS, and the Ethernet interface of the embedded system are designed.
介绍基于ARM内核的微处理器LPC 2210、以太网rtl 8019as芯片的性能，设计了一种基于二者的嵌入式系统以太网接口方案。
According to the ARM CPU AT91RM9200 principle of work and performance, this paper presents a set of design scheme on vehicle smoothness criterion measuring system based on ARM.
根据ARM处理器at91 RM 9200的工作原理和性能特点，提出了一种基于ARM嵌入式技术的车辆运行平稳性系统设计方案。
This paper interprets the means of the development of the preset unit of TCSC Test Controller with ARM microprocessor, embedded real time operating system and the USB technique.
本文采用ARM处理器技术、嵌入式实时操作系统技术和通用串行总线(usb)技术来完成TCSC实验系统控制器前置单元的实际开发。
Methods an ARM embedded system was used to achieve data transmission by implementing serial communication with GPS module, Beidou receiver and wireless digital broadcasting station.
方法：采用ARM嵌入式系统，并与G PS模块、北斗接收机和数传电台进行串口通信，实现数据的传输。
This paper is directed against this situation to design a kind of interface system that is ARM processor-based embedded Ethernet.
本文针对这种情况设计了一种基于ARM 处理器的嵌入式以太网接口系统。
This paper present the design of an embedded system based on ARM and its application in FMS(Flight Motion Simulation) System.
本文详细介绍了基于ARM构架的嵌入式系统的构建方法及其在飞行转台系统中的应用。
This thesis works at the back ground of Autonomous Flight Robot project. Thedesign of Embedded Real-Time System software based on ARM (Advanced RISCMachine) is given.
本文以自主飞行机器人控制系统项目为研究背景，对基于ARM处理器核的嵌入式实时系统软件构造做了分析。
The hardware is based on the Samsung's ARM microprocessor. A CPLD chip is used to control the interface of the network and IDE.
网络刻录系统的嵌入式处理器选择了三星的ARM处理器，并使用CPLD芯片来控制网络和IDE等接口。
This paper introduces the design method of ARM based embedded system, and mainly explains the initialization technique.
本文介绍了基于ARM的嵌入式系统的设计方法，重点讲解了系统的初始化引导技术。
A hardware implementation scheme for the embedded-based network numerical control is proposed, and the software architectures of ARM and DSP modules of the central NC unit are introduced.
提出嵌入式新型网络数控系统中央数控单元硬件实现方案，搭建起中央数控单元先进精简指令集处理器和数字信号处理器的软件架构。
The embedded test system is designed based on ARM micro-controller according to the integration of bionic navigation system.
针对仿生导航系统集成化的需要，设计了基于ARM的嵌入式测试系统。
This paper analyzes the application of ARM microprocessor in a gateway of embedded remote measurement and control system, elaborates on the design method about software and hardware of this gateway.
分析了ARM微处理器在嵌入式远程测控系统网关中的应用，重点阐述了网关软、硬件的设计方法。
It presents the solution that the embedded system based on ARM processor S3C4510B is used to solve the present problems of NC machine tools networking in this thesis.
针对这些问题在论文中提出了利用基于ARM处理器s3c 4510b的嵌入式系统来解决的方案。
应用推荐