And the arc temperature drops down with the consistency of aquesous alcohol or aqueous acetone increases.
随着乙醇或丙酮浓度的增加，电弧温度下降。
On line monitoring for grinding arc temperature is a necessary and important section to realize automation of grinding process.
对磨削弧区温度进行在线监测，是磨削加工自动化中必不可少的重要环节。
The problems of influences of edge displacement disturbance, tack weld disturbance and high arc temperature on the sensor have been solved.
在传感器方面解决了错边干扰、定位焊点干扰及电弧高温的影响。
A new method for the diagnostics of the welding arc temperature fields is studied on the basis of Plasma physics, laser speckle photography.
根据散斑照相和电弧等离子体物理学原理，研究了诊断氩气焊弧温度场的新方法。
Four spectral lines with different wave length of sodium atom were selected in measuring the arc temperature by Boltzmann's Graphical Method.
试验选用了钠原子四条不同波长的谱线，用玻耳兹曼图解法求得电弧的温度。
In order to monitor and forecast grinding arc temperature dynamically, an improved BP network is designed as a temperature forecasting model.
具体给出了监测系统的组成及测温方案，并提出了一种更适宜进行动态预报的改进型BP网络作为磨削温度的预报模型。
It is proved by technological experiments that the monitoring system can better realize on line monitoring and forecasting for grinding arc temperature.
工艺实验证明该系统能够较好地实现磨削温度的在线监测与预报。
Based on the assuming of the arc temperature distribution and the investigation of the energy balance in the arc, a simplified model of the dynamic arc in transverse magnetic field is proposed.
本文在假定电弧截面温度分布的基础上，通过对电弧内部能量平衡的研究，提出了一个横向磁场中动态电弧的近似计算模型。
In this paper the temperature of underwater welding arc is investigated systematically by means of spectral diagnostics of plasma.
本文利用等离子体光谱诊断法对水下焊接电弧温度进行了比较系统的研究。
Increase the compression degree can make arc of high temperature plasma jet extended, form more uniform high temperature area, and increase the speed of the jet, can reduce the width of the poor.
增加电弧的压缩程度可以使高温等离子射流延长，形成更为均匀的高温区域，同时加大射流的速度，可以减小切口上下的宽度差。
Inorganic water-based silicate sealing reagent used in high velocity arc spray at high temperature is prepared and investigated in this paper.
研究并制备了用于耐高温合金涂层封孔处理的水性无机硅酸盐封孔剂。
An analytic model and an expression are set up on the temperature distribution along the electrode axis during the arc erosion.
建立了电接点电侵蚀沿电极深度方向上的温度场分布解析模型和解析表达式。
In the August of Shanghai, the temperature was scorching, this "arc-mountain" provided space for abundant public activities in the square with the two shaded space.
上海的八月，温度是相当高的，“弧形山脉”在广场上投下两块阴凉的空间，可服务于大量的公共活动。
It was found that with increasing the cathode temperature the arc velocity decreases.
实验发现，随着阴极温度的增加，电弧的后退速度下降。
This system can stabilize the arc current and temperature, adjust and display all parameters and has safe-guard ability.
该系统可以稳定弧流和温度，可以调整并显示所有离子源参数数据，并具有安全保护功能。
Temperature is one of the important physical features of electric arc.
温度是电弧的重要物理特性之一。
The temperature field in welding HAZ was studied and analyzed. Welding heat curve was set up by argon-shielded tungsten arc welding experiment.
通过钨极氩弧焊试验，对焊接热影响区温度场进行分析和研究，建立了焊接热循环曲线。
The combined properties of the material, such as density, hardness, resistivity, arc resistance and temperature characteristics, are similar to those of conventional silver contact materials.
该材料的综合性能，如密度、硬度、电阻率、灭弧特性及温度特性与传统的银基触头材料接近。
The influencing factors and their weights on deposited temperature have been studied in detail during pulsed bias arc ion plating (PBAIP).
针对脉冲偏压电弧离子镀技术，分析了影响基体沉积温度的各项因素及其影响程度。
Through the theoretical calculation, the radial and axial temperature distribution of arc column and the thermal boundary region were obtained.
通过测量和分析计算获得了弧柱和热区的径向及轴向温度分布。
The results indicate that high temperature effect of arc column strongly prevents cold gas current from getting in, so as to restrain CVD process.
结果表明：电弧弧柱的高温效应剧烈排斥冷气流的混入，使CVD过程受到抑制。
The theoretical basis and measuring apparatus of the temperature measuring method for wall stabilized arc plasma are described, and the errors of measurement are estimated.
介绍壁稳弧等离子体温度测量方法的理论依据和测量装置，并进行了误差分析。
Welding temperature distribution was effected by the effective heated radius of the arc regulated by different external longitudinal magnetic intensity.
外加纵向磁场可以改变电弧加热有效半径进而影响焊接温度场分布。
It is regarded that the lower dilution rate is related to homogeneous distribution of temperature and pressure of the arc and deoxygenization of the arc gas.
作者认为其稀释率低与电弧温度分布及压力分布均匀、温度适中、电弧气氛具有一定还原性的特点有关。
Sensitivity, temperature resolution are analyzed, some theoretical background is given. The results arc available for circuit design.
本文给出了基本的理论关系，分析了灵敏度和温度分辨率，为电路设计提供依据。
Application of argon arc local strengthen can increase hardness and high-temperature wear resistance of the ring groove.
采用氩弧局部强化可提高环槽的硬度和高温耐磨性。
To reveal the influence of forced convection on gas shielded arc welding temperature field, the infrared camera was used to investigate the temperature field of the base metal in CO2 arc welding.
为了研究强制对流对气体保护焊温度场的影响，通过红外热像仪检测了CO2气体保护焊的温度场，发现在熔池及其邻近区域温度呈圆锥型分布。
The diameter of non-thermal arc plasma is an important parameter to determine the current density of arc that determines temperature and density of the electrons.
大气压非热电弧的直径是确定电弧电流密度、从而确定等离子体电子密度和电子温度的重要参数之一。
The diameter of non-thermal arc plasma is an important parameter to determine the current density of arc that determines temperature and density of the electrons.
大气压非热电弧的直径是确定电弧电流密度、从而确定等离子体电子密度和电子温度的重要参数之一。
应用推荐