For duplex stainless steel thermal cutting shall be limited to the plasma arc method.
对双相不锈钢进行热切割应该仅限于等离子弧切割方法。
During programming for the trough and cavity, programming of arc method is used for some typical positions of trough and cavity to improve the machining precision.
在编制槽和型腔加工数控程序的过程中，针对槽和型腔的典型部位采用趋近圆弧的编程方法进行编程，提高加工精度。
The electric arc method is one of the most important methods in synthesizing carbon nanotubes, in addition to laser ablation method and catalytic decomposition of hydrocarbons.
纳米碳管的制备方法主要有三种：电弧放电法、激光烧蚀法和有机物催化热解法。
A methodology of most dangerous sliding surface search and slope stability analysis is proposed by combining mixed genetic-simulated annealing algorithms with Sweden arc method.
利用遗传模拟退火算法结合瑞典圆弧法，寻找最危险滑裂面进行边坡稳定分析。
The range and the variation of the errors, and the influential factors are studied in this paper through the circular arc method. The measures for decreasing the errors are advanced.
本文用圆弧滑动计算法探讨了这种误差的大小、影响因素及变化规律，提出了减少误差的措施。
The improvement on solving Earth Orientation Parameters (EOP) model is introduced. The improved model is more conformable to high precision of SLR data and is used in multi-arc method.
详细介绍了与SLR观测资料的高精度相适应的解EOP模型的改进，并且在复弧法中使用这个改进模型。
In this paper, a method-ARC method is introduced, by which the development chart can be drawn, of multiple-piece, equal-diameter and right-angled elbows with the radius as the arc of r.
本文介绍了一种用半径为r的圆弧绘制多节等径直角弯头展开曲线的方法——圆弧法。
This paper presents a method of arc projective transformation of the fundamental geometric elements on a sphere, and sets up an are projective system for three axial and two axial correspondently.
本文提出了一种球面上基本几何元素的园弧投影变换方法，并建立了三轴及对应的二轴园弧投影体系。
Besides, If it can not fill a rotated cubic arc of monotonic curvature, the method for computing extreme value of curvature is given.
在不能填充曲率单调的单拐曲线弧的情况，给出一个计算曲率极值点的曲率的公式。
In this paper, a numerical method is presented for nearly arc length parameterization of parametric curve.
讨论参数曲线近似弧长参数化的数值方法。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
As a widely used welding method, arc stud welding technology has some superiority in higher welding efficiency and in easier to achieve automatic control etc.
作为一种广泛应用的螺柱焊接方法，电弧螺柱焊技术具有焊接效率高，易于实现自动化控制等优点。
The load assignment formula and the method of the double circular arc gear under the wiring error influence between the contact mark was introduced and inferred.
介绍并推导双圆弧齿轮在安装误差影响下接触迹间载荷分配的计算公式和方法。
The influence of arc surfacing method on the property and structure of the surfacing layers were studied.
试验研究了碳化钨耐磨药芯焊丝电弧堆焊工艺方法对堆焊层性能和组织的影响。
We present a Raman scattering study of multi wall carbon nanotubes prepared by DC arc discharge method.
本文报导了用直流碳弧放电方法制备的多层碳纳米管的拉曼光谱。
In order to assess the flicker caused by electric arc furnace, the simulation method to assess flicker and its application in electric arc furnace power system was studied.
为了仿真评估电弧炉引起的闪变严重度，对闪变仿真法及其在电弧炉供电系统中的应用进行了研究。
Based on the principle of the least deviation method, the paper puts forward a rapid and high-precision arc interpolation method through special-structural discrimination function.
在最小偏差法原理的基础上，通过构造独特的偏差判别函数，提出了一种快速高精度的圆弧插补方法。
In this paper, the method integrating CPV350 inverter welding machine to arc welding robot control system is introduced.
介绍了CPV350型逆变电焊机与弧焊机器人控制系统的连接方法。
In contrast with general welding method of single arc, the forms of Plasma-MIG welding arc are more complicated.
与一般的单电弧焊接方法相比，等离子mig焊的电弧形态要复杂的多。
Secondly, analysed the approach model, described circular arc approximation method, approaching blade curved surface with this method and realized raise of the approach speed.
其次，分析了逼近模型，推导了单圆弧逼近方法，用这一方法来逼近叶片曲面，提高了逼近速度。
Aluminum coatings were sprayed onto the substrate of steel Q235 by arc spraying method and the processing parameters were optimized by orthogonal experimental design.
采用电弧喷涂方法在Q 235钢基体上喷涂铝涂层，并用正交设计的方法对工艺参数进行了优化。
Post buckling analysis was traditionally conducted by arc length method.
结构后屈曲分析传统上都是采用弧长控制法来处理。
Measuring technique such as coordinate method , arc chord offset method and internal control measurement are applied .
施工测量中运用坐标法、圆弧弦线支距法以及内控法等多种测量法。
Now to widespread adopt continuous MAW (merge arc welding) method produces spire steel tube.
目前普遍采用连续成型、埋弧焊接的方法制造螺旋钢管。
Based on the through the arc sensing method, a method is put forward to recognize the disturbance information of gas metal arc welding (GMAW).
基于电弧传感的检测方法，提出了一种识别GMAW焊接过程干扰信息的方法。
You should try a Nonlinear analysis, possibly with Arc length control method.
应该试一下非线性分析，可能要用弧长控制法。
The invention provides a relay electric arc testing method and a simulated relay electric arc testing method.
提出了一种继电器电弧试验方法和一种模拟继电器电弧试验方法。
A hydrogen arc discharge method for preparing SWNTs was developed in this research, by which high quality SWNTs can be synthesized in a large scale.
本研究提出一种有效制备单壁纳米碳管的半连续氢电弧法，实现了高纯度单壁纳米碳管的大量制备。
The nanometer tin powders were prepared by DC arc plasma evaporation method using a self-designed and fabricated apparatus.
采用高纯锡，通过自行设计的直流电弧等离子体蒸发设备制备了纯净的纳米锡粉。
The nanometer tin powders were prepared by DC arc plasma evaporation method using a self-designed and fabricated apparatus.
采用高纯锡，通过自行设计的直流电弧等离子体蒸发设备制备了纯净的纳米锡粉。
应用推荐