Fuzzy control tests of arc voltage and short-circuit frequency are conducted to improve welding quality.
采用模糊控制技术，实现了电弧电压或短路频率的控制，提高了焊接质量。
Results show that the frequency spectrum characteristics of arc diffluence is accordance to jet fluctuation. Arc diffluence in the new gun is confined obviously.
试验结果表明，电弧分流和射流脉动的频谱特性是一致的，在使用新等离子体喷枪时，电弧分流明显得到了限制。
If you want to a more forceful, stiffer arc, you can tighten the frequency.
如果你想要一个更有力、更严厉的弧形，可以加强频率。
The characteristic of linear and nonlinear responses between arc excited ultrasonic emission and excited frequency was realized by the received signal from the acoustic to the ultrasonic spectrum.
对受激电弧的声发射信号分析表明，从音频到超声频带，电弧声发射与激励频率之间存在着线性响应和非线性响应特征。
Metal transfer frequency are usually taken as the criteria to evaluate the process stability of short-circuiting arc welding.
短路过渡焊接时，熔滴过渡频率通常被作为评价焊接过程稳定性及焊接质量的重要指标。
IGBT power modules, 18khz inverter frequency, fast response time, high arc stability, almost spatter-free welding.
采用IGBT模块，逆变频率达18khz，动态响应速度快、稳定性能好、。
Brazing quality and product reliability are both increased as using high frequency pulse microplasma arc heating process for assembly brazing of cathode and photoetching grid of electron tube.
采用高频脉冲微束等离子弧做为电子管阴极和光刻栅极装配钎焊工艺的热源，提高了钎缝质量和产品的可靠性。
Re melt deposit welding process is proposed in this paper. To realize the technology, plasma arc, TIG arc, high frequency induction, gas shield continuous stove and MSW are adopted.
提出熔敷焊接工艺方法，采用等离子弧、TIG电弧、高频感应、气保护连续炉、真空炉和模中熔铸工艺实现了熔敷焊接工艺方法。
In the course of laser-arc hybrid welding, the high frequency caused by drawing arc interfered the control system which make the laser and electric arc not able to realize the hybrid welding.
激光-电弧复合焊接过程中，由于引弧产生的高频干扰了激光器的控制系统，造成了激光和电弧不能实现复合焊接。
Chinese aircraft cnginccrs arc becoming intcrcsted in some strange localized vibration phenomena that occur during ground vibration test and flutter test: mode localization and frequency loci veering.
研究了某机简化模型线性振动的模态局部化现象，以及与此现象密切相关的频率曲线转向现象。
In case of different droplet - transfer forms, fuzzy control schemes of arc length and short - circuit frequency are put forwords.
在不同的熔滴过渡形式下，提出了弧长和短路频率智能模糊控制方案。
The principle of arc-suppression coil with three phases and five columns , and theory of power frequency extinguishing arcing were introduced.
介绍了三相五柱式消弧线圈的工作原理，单相电弧接地过电压的工频熄弧理论。
This pape studies the optimum design theory and practice of hight frequency high-power pulse transformer of arc welding inverter.
从理论和实践上探讨了弧焊逆变器的高频脉冲功率变压器的优化设计。
By means of lots of lightning impulse tests, power frequency arc tests as well as bend loading tests, a kind of clamping post composite insulators with matching insulation hoods is developed.
通过大量的雷电冲击放电试验、工频电弧试验和弯曲负荷试验等试验研究，研制出了一种放电箝位柱式复合绝缘子和配套的绝缘罩。
This study designed a system to generate ultrasonic-frequency pulsed plasma cutting arc, and experimentally investigated the vibration characteristics of the high frequency pulsed arc.
本研究设计了一种超声频脉冲等离子切割电弧发生系统，并通过实际切割试验，测试、分析了这种高频脉冲电弧的振动特性。
Searching for a way to create an arc light for use on AC networks, Tesla now found a new fundamental ideal on which to focus: high-frequency electrical phenomena.
在特士拉想办法让电弧灯搭配AC电路使用时，发现了一个崭新的基本想法并且专注其上，那便是高频电流现象。
In frequency analysis of rotating arc signal, the phase of harmonic characteristic reflects the initial Angle between weld direction and seam's direction.
在旋转电弧信号的频域分析中，其特征谐波的相位反映了焊缝方向与焊接方向的初始夹角。
A new kind of high frequency arc striking device was presented here based on the analysis of traditional arc striking circuits. The working principle of the device was analyzed.
在分析传统引弧电路的基础上，提出了一种新型的高频引弧电路，并对其工作原理进行了分析。
Besides, a high frequency arc firing apparatus is briefly recommended.
陡降特性的获得。另外，简要介绍了高频引弧装置。
In coordination with the application of post-set arc suppression coil, a frequency scanning based modified method for detecting system capacitance to earth is proposed.
为配合随调式消弧线圈的使用，提出了一种扫频检测系统对地电容的改进型方法。
Research on harmonic analysis of arc furnace electric system based on frequency domain method.
电弧炉电气系统谐波分析的频域方法研究。
It is approved that the novel high frequency power transformer can be applied on 50kva soft-switching submerged arc welding inverter successfully.
实践表明，该新型结构的功率变压器可以成功的在50kva软开关埋弧焊逆变器中应用。
Arc welding power supply with an inverter is described in this paper. Application of high frequency transformation technology in arc welding power supply with an inverter is presented.
本文对逆变器弧焊电源进行了阐述，介绍了高频变换技术在逆变器弧焊电源中的应用。
In basis of analyzing the features of the conventional arc welding technology, a DC low-frequency plasma welding power with fusion penetration is selected as the heat source for metal forming.
本课题在分析常规弧焊技术特点的基础上，选取熔透式低频直流等离子弧焊电源作为成形的热源。
The function and characteristics of high frequency transformer used in arc welding inverter are introduced in this paper.
介绍了高频功率变压器在弧焊逆变器中的作用和特征。
Quality square wave power supply, current zero crossing time is short, arc stability, arc without high frequency stability.
优质方波电源，电流过零时间短，电弧稳定，无需高频稳弧。
The design of high frequency transformer in inverter arc welding power is introduced, which is based on the characteristics of inverter arc welding power.
结合逆变弧焊电源的工作特点，详细介绍了其高频变压器的设计方法。
The article analyzes the application of high voltage frequency converter on the arc furnace dust removal fan in some steel-smelting factory.
分析了高压变频器在某炼钢厂电弧炉炼钢除尘风机中的应用。
The maximum axial, pressure of the high frequency arc is higher than that of the DC arc.
高频电弧的最大轴向压力大于直流电弧。
氩弧焊为高频引弧方式。
应用推荐