Through ANSYS simulation of vibration for the electrode wire. Proposed the measure of reduce vibration of electrode wire in order to improve the electrode wire cutting machine quality.
通过对电极丝振动的ANSYS模拟，提出了降低电极丝振动以此来提高线切割机床加工质量的方法。
Through the combination of ANSYS simulation and experimental data, the conclusion is drawn that the enhancement of the thin gas film can improve the static bearing capacity of the air bearing.
通过ANSYS仿真和实验数据相结合得出了结论：气膜内稀薄效应的增强，可以一定程度上提高气浮支撑的静承载能力。
Disk drive designers use ANSYS FSI solutions to conduct two-way coupled fluid-structure simulation, which provides the ability to optimize devices in a single simulation environment.
磁盘驱动器的设计者可以利用ANSYSFSI进行双向耦合流体结构仿真，该软件具备在单一的模拟环境下优化设备的能力。
This paper simulates the temperature field associated with laser surface quenching using ANSYS - a finite element analysis software, and a series of studies are carried out based on this simulation.
本文结合先进的大型有限元分析软件ANSYS，对激光表面淬火的温度场进行有限元模拟，并在此基础上，对此展开一系列研究。
After discussing existing methods of construction simulation, an ameliorated analysis method of cycle-forward is developed, which is based on the method of cycle-forward and ANSYS software.
在总结现有施工模拟方法的基础上，结合循环前进分析法和有限元软件Ansys，提出了改进的循环前进分析法。
The results show that using the secondary developing tool of ANSYS can decrease repetitive work, enhance working efficiency and get fairly good simulation effect.
结果表明，利用ANSYS的二次开发工具，可以减少重复工作，提高工作效率，达到很好的仿真效果。
ANSYS software was employed to establish three-dimensional strip model of CCGA624 device and optimized simulation of soldered column dimension was also studied.
借助ANSYS有限元软件建立CCGA624器件的三维条状模型，基于应变对焊柱可靠性进行优化模拟分析。
Applying the numerical simulation program ANSYS to analyze the stability of pillar, it proved pillar is stable.
运用ANSYS程序对煤柱的稳定性进行了数值模拟，验证了煤柱的稳定性。
Three-dimensional flow simulation of mixing zones in a new conical twin screw extruder with mixing blocks is performed with a finite element package, ANSYS.
利用ANSYS有限元分析软件对带有混合块的新型锥形双螺杆的混合段流场进行了三维模拟分析。
Numerical simulation analysis is made of the paste piping transportation using FLOTRAN CFD calculation hydrodynamic analysis module in ANSYS software based on the paste filling mechanical parameters.
以膏体充填力学参数为基础，运用ANSYS软件中的FLOTRANCFD计算流体动力学分析模块对膏体管道输送进行了数值模拟分析。
The effect of the construction of project, we can say that the measures of temperature control and ANSYS numerical simulation are effective and feasible.
工程的实际施工效果说明，应用的大体积混凝土温控措施和ANSYS模拟是有效和简便易行的。
Carried out using ANSYS three-dimensional numerical simulation of tunnel excavation command stream.
用ANSYS进行的三维隧道开挖数值模拟的命令流。
A simulation of dynamic forces acting on invert prefabricates in TBM construction tunnel is made with surrounding rock-structure model by using ANSYS software.
运用计算软件ANSYS，采用围岩—结构模式，对TBM施工隧道仰拱预制块进行模拟动态施工的受力计算研究。
This article studies the stress concentration question nearby the hole of the finite width thin board by means of ANSYS numerical value simulation.
应用ANSYS数值模拟的方法研究了含圆孔有限宽度薄板孔边应力集中问题。
The simulation and analysis of the pressure distribution in head runner of double plex tread extruder were made with ANSYS FEA software.
采用ANSYS有限元分析软件对胎面双复合挤出机头流道内部的压力场进行模拟和分析。
The influence of parameter of copper aluminum cladding plate on the electric conduction properties has been investigated by the simulation of ANSYS analysis software.
利用有限元分析软件ANSYS模拟计算了铜-铝-铜复合板参数对导电性能的影响。
In order to solve the eccentric worn problem of tubing, deformation finite element simulation of the eccentric worn tubing was carried out with ANSYS software under internal pressure and axial load.
为了解决油管偏磨问题，对内压和轴力作用下的无偏磨、单面偏磨和双面偏磨油管分别进行了有限元(AN - SYS软件)模拟研究。
The general loading arithmetic of Gauss heat source in ANSYS welding simulation is loading heat flux(HF)on the whole welding surface based on TABLE array parameters.
A NSYS焊接仿真中高斯热源的一般加载算法是：基于表参数的整面热流密度加载。
Three-dimensional flow simulation of flight element in mixing zone of a conical twin-screw is performed with a finite element package, ANSYS.
用ANSYS有限元分析软件对锥形双螺杆螺纹元件流道的流场进行了三维模拟。
Furthermore, the temporal curves of the maximal depression displacement are obtained by ANSYS LS-DYNA. The simulation results agree with those of the tests.
其次采用ANSYSLS - DYNA进行了仿真模拟，给出了凹陷变形的时程曲线，获得了与现场实验较一致的结果。
Based on ANSYS program, the authors carry out analysis of numerical simulation on large-span structure with stone vault by combining with engineering example.
结合工程实例，基于ANSYS程序对大跨度石穹顶空间结构进行数值模拟分析。
Numerical simulation of finite element method for pile-bucket foundation under uplifting load were conducted by making use of ANSYS software.
通过使用ANSYS软件，对桩-桶基础上拔试验进行有限元数值模拟。
Three-dimensional flow simulation of mixing blocks in a conical twin screw extruder is performed with a fi nite element package, ANSYS.
利用A NSYS有限元分析软件对带有混合块的新型锥形双螺杆的混合段流场进行了三维模拟分析。
The ground stress is also simulated using large scale finite numerical simulation software ANSYS.
并采用大型有限元软件ANSYS对陷落柱及其周边的应力分布进行了模拟计算。
A simulation study was made of the centrifugal stresses exerted on a grinding wheel by means of a visual numerical simulation technique, using the FEM software ANSYS.
应用可视化数值模拟方法，借助于大型通用有限元软件ANSYS建立砂轮回转的数学模型，对离心应力进行了仿真研究。
Numerical simulation was made with ANSYS software.
通过ANSYS软件进行了温度场数值模拟。
Study method is to adopt ANSYS-international large-scale general-purpose finite element software to realize the simulation calculation of the RCC thermal stress for Aggregate linear expansion.
在研究方法上采用国际大型通用有限元软件ANSYS建模来实现混凝土骨料线膨胀对碾压混凝土温度应力的仿真计算。
The numerical simulation and analysis of shear resistance behavior of two-side connected steel-plate shear wall (SPSW) was carried out by the finite element software ANSYS.
采用ANSYS有限元程序对两边连接钢板剪力墙进行数值模拟分析。
ANSYS software simulation of the arch tunnel excavation and support structures of the finite element method were researched.
对ANSYS软件模拟连拱隧道开挖及支护结构的有限元理论进行了研究。
ANSYS software simulation of the arch tunnel excavation and support structures of the finite element method were researched.
对ANSYS软件模拟连拱隧道开挖及支护结构的有限元理论进行了研究。
应用推荐