Temperature field of 7050 aluminum alloy during its cryogenic treatment is calculated with ANSYS program.
应用有限元分析软件ANSYS计算了7050铝合金深冷处理时的温度场。
The calculate result proves that the ANSYS program is an effective calculation tool for wave load and power analysis.
计算实例说明ANSYS的动力模块程序是计算波浪载荷，进行动力分析的有效工具。
ANSYS program is a good tool that carries on thermal and structural analysis, and its application on the ladle is very wide.
A NSYS程序是进行热和结构分析的好工具，它在钢包上的应用非常广泛。
The characteristics of loading transmission of the CFG pile composite foundation has been analyzed by use of the ANSYS program.
采用有限元ANSYS程序对CFG桩复合地基的应力传递特性进行了分析；
Thermal calculations have been conducted to the absorber bodies using both the classical thermodynamic formulas and the ANSYS program.
用经典热力学公式和ANSYS程序对吸收体进行了热计算。
Building nonlinear finite element models using ANSYS program, And in the light of previous experimental to verify the correctness in the article.
本文利用ANSYS程序建立了非线性的有限元模型，并参照前人试验验证模型分析程序的正确性。
In this paper, the global finite element model of yongle bell and its supporting system are established for the first time by using ANSYS program.
本文首次采用ANSYS有限元分析软件对永乐大钟及其悬挂支撑系统建立了整体的有限元模型，进行了静力学分析及整体强度校核。
Members are modeled as solid elements, then plates and screws are glued. The equation resolution method is selected by ANSYS program automatically.
采用实体单元模拟连接板件及螺钉，在连接板件钉孔部位建立接触状态，求解方法由ANSYS程序自动选择。
Finally, by using the ANSYS program, the thermal vibration characters of the plate and missile body structures with different materials is analyzed.
最后，采用ANSYS程序分析了合金材料、复合材料的板、弹体结构的热振动特性。
The finite element analysis model to the U shape bellows is presented and calculated by the ANSYS program under diverse loads for in plane instability.
建立了U形无加强波纹管结构分析的有限元分析模型，采用ANSYS有限元软件对其在不同平面失稳工况下的应力响应进行了计算。
By using SAP2000 and ANSYS program, the conclusion we can get: 1. The use of pre-stressed structural members caused by redistribution of internal forces.
通过SAP2000和ANSYS程序的分析，本文主要结论有：1。预应力的使用引起结构构件的内力重分布。
With some precision, the well-trained network succeeded in taking place of the ANSYS program to calculate the mechanics character of different structures.
在一定的精度许可范围内，较好地实现了神经网络对ANSYS有限元计算的替代。
Based on ANSYS program, the authors carry out analysis of numerical simulation on large-span structure with stone vault by combining with engineering example.
结合工程实例，基于ANSYS程序对大跨度石穹顶空间结构进行数值模拟分析。
For the cracking on the chassis of DLQ25A movable crane, the ANSYS program is used to establish the shell-elements FEA model of main beam with supporting leg.
针对DL Q 2 5 A轮胎起重机底架结构开裂的情况，采用ANSYS程序建立了主梁与支腿一体的板壳单元有限元分析模型。
This paper presents a method for calculating heat conduction and thermo-elastic deformation of double-disk supported thrust bearing by means of ANSYS program.
介绍了ANSYS软件用于水轮发电机双托盘支撑推力轴承的热传导和热弹变形计算的方法。
The temperature field with phase transformation and non-linear surface heat-transfer coefficient of steel 1045 during quenching is calculated with ANSYS program.
应用有限元分析软件ANSYS计算了1045钢淬火时具有相变和非线性表面换热系数的温度场。
In order to test and verify the heat radiation of the CPU heat sink, the authors have conducted a thermal simulating analysis on the basis of ANSYS program of FEM.
为了验证研制出的CPU散热器的散热效果，利用有限元分析软件ANSYS对该CPU散热器进行了散热分析。
Connecting the strength reduction of finite element method, the paper used the new criterion to analyze slope stability problems by importing it into ANSYS program.
本文将新准则引入到大型通用有限元程序ANSYS中，并与强度折减系数法相结合用于分析岩土工程中的边坡稳定问题。
The ANSYS Program is used to analysis the global stability of the hinged gable frames with different column heights, spans and slopes under the vertical uniform loading.
应用ANSYS程序，在竖向均布荷载作用下，对不同柱高、跨度和坡度的柱脚铰接的山形门式刚架进行了整体稳定分析。
The theory and method of analyzing the no-load magnetic field of military portable generator and simulating its no-load voltage based on ANSYS program were explained in detail.
详细说明了利用ANSYS有限元分析软件分析军用移动电源的空载磁场，仿真其空载电压的理论基础和实现方法。
With ANSYS program, a comprehensive analysis is carried out for the lateral stability of Yingnahe bridge. The critical loads' formula previously concluded in the 3rdpart is checked.
运用ANSYS这一大型有限元商业软件对英那河水库坝下大桥进行了详细的稳定性分析，验证了本文利用能量法临界荷载公式。
ANSYS program was employed to execute the response spectrum analysis and determine the response of semi-rigid concrete filled steel tubular structure under selected earthquake excitation.
使用通用有限元分析软件ANSYS进行半刚性连接钢管混凝土结构的反应谱分析，并研究了半刚性连接钢管混凝土框架结构在选定地震波激励下的响应。
The calculating methods to the problem of contact in ANSYS program are studied, and the contact suture and key groove are stimulated in ANSYS program and analyzed their feasibility by examples.
对ANSYS软件中关于接触问题的计算方法进行了详细研究，并通过数值算例的计算分析，对ANSYS采用接触单元模拟接缝的可行性问题进行了探讨。
The finite element analysis of the bridge-erecting machine 'beam under welding defect conditions is conducted with ANSYS program, which provides a basis for the structural safety assessment of beam.
以A NSYS为分析工具，对铁路架桥机导梁焊接缺陷进行有限元分析，为导梁进行结构安全评定提供依据。
Designed model established by ANSYS program is used to analyze the loading behavior of the CFG pile composite foundation such as vertical displacement, stress and character of destructive capability.
利用ANSYS有限元程序建立模型，对CFG桩复合地基承载性状(竖向位移、应力分布、破坏特点等)进行了分析。
By means of the finite element program ANSYS and using orthogonal design method, the parameters having effect on the stability of this structure were analyzed and primary factors were obtained.
本文利用ANSYS有限元程序通过正交设计的方法对格构式斜腿刚架进行了平面外整体稳定承载力参数分析，得到显著影响因素。
The overall stability tests of monosymmetric I-shaped overhanging beams and two-span continuous beams are simulated by finite element program ANSYS.
利用ANSYS有限元程序对单轴对称工字形单伸臂梁和双跨连续梁整体稳定试验进行了有限元模拟。
The overall stability tests of monosymmetric I-shaped overhanging beams and two-span continuous beams are simulated by finite element program ANSYS.
利用ANSYS有限元程序对单轴对称工字形单伸臂梁和双跨连续梁整体稳定试验进行了有限元模拟。
应用推荐