The temperature fields during ultrasonic vibration aided electrical discharge machining in gas are simulated with ANSYS method and FEM software.
用ANSYS以有限元软件对超声振动辅助气中放电加工过程的温度场进行了数值模拟。
General beam-column stiffness connections and the full-welded dog skeleton connection is analyzed and compared by Nonlinear finite element analysis method (ANSYS method) and draw some conclusions.
采用非线性有限元方法(ANSYS程序)分析普通梁柱刚性连接和全焊狗骨式连接并进行比较，可得出一些有益于工程的结论。
The engineering instance is calculated by ANSYS, the popular software for the finite elements analysis, and the results is same as that calculated by common method.
采用目前比较流行的大型有限元分析软件ANSYS对算例进行了分析计算，结果与常规计算方法的结果相符；
Using the finite element method software ANSYS, the stator temperature field of the hydroelectric generator is analyzed and calculated, the corresponding temperature field picture is given.
在此基础上应用有限元法的通用软件ANSYS，对大型水轮发电机定子温度场进行分析与计算，绘制了相应温度场图。
According to the characteristics of the unit suit for jacket platform provided by ANSYS, concluded a essential process and method for the jacket platform construction analysis with ANSYS.
根据ANSYS提供的适合导管架平台的单元的特点，归纳出进行导管架平台结构有限元分析的基本过程和基本方法。
The modelling method of applying ANSYS to match model parameter according to the testing data.
以实测动力特性参数为依据，应用ANSYS拟合模型参数的建模方法。
The stator's characteristics of vibration and input impedance were analyzed by using the finite element software ANSYS. A new decoupling method between the two vibrators was presented.
对电机的运行机理进行了分析，并利用有限元软件ANSYS分析了电机定子的振动特性和阻抗特性，同时提出了一种振子间解耦的方法。
On the base of introducing the principle of the magnetic flux leakage (MFL) detection, the finite element method based on ANSYS used to simulate and analyze the MFL signal is presented.
在介绍漏磁检测原理的基础上，详细论述了利用有限元法分析缺陷信号的方法以及利用ANSYS对漏磁信号的仿真过程和仿真结果，并对结果进行分析。
The results of transient temperature field calculated by finite difference method and ANSYS software agree with the experimental results.
高压氮气淬冷温度场的有限差分法计算结果和ANSYS有限元分析软件计算结果与实测结果吻合较好。
Further more, using the method and ANSYS software, the Vibration behavior of the crankshaft in an one-cylinder engine and a four-cylinder engine are analyzed.
应用此方法，以一单缸发动机的曲轴及一四缸发动机曲轴为实例，采用ANSYS软件对它们的振动特性进行分析。
The equivalent age method is extended successfully to the concrete cracking control in structures through the use of the finite element program ANSYS.
与有限元软件一起使用，等效龄期方法还可以运用于混凝土结构的温度裂缝预测与控制中；
By means of the finite element program ANSYS and using orthogonal design method, the parameters having effect on the stability of this structure were analyzed and primary factors were obtained.
本文利用ANSYS有限元程序通过正交设计的方法对格构式斜腿刚架进行了平面外整体稳定承载力参数分析，得到显著影响因素。
Example results show that the methods presented in this paper is accurate and effective. The improved dynamic relaxation method is better than that using ANSYS at accuracy and stability.
算例分析表明本文提出的找形方法是正确有效的，相对而言，改进的动力松弛法在计算精度和稳定性方面要优于ANSYS找形方法。
A method of optimum design on active vibration control system of piezoelectric smart structure using finite element analysis software ANSYS was introduced.
介绍了利用有限元分析软件ANSYS，对压电智能结构的主动振动控制系统进行优化设计的方法。
The filed numerical analysis method of import parameters is presented, and the result of ANSYS is given also.
提出了电机中重要参数的有限元求解方法，并给出了有限元分析的结果。
Finally, on the above results from ANSYS and reference presented, the method to design and construct economic and reasonable types of connections is proposed.
最后，根据ANSYS模拟的结果及已有研究成果，提出了梁柱连接节点经济合理的设计施工方法。
The finite element model of underwater structure with shafting is built by ANSYS. The characteristics of structural acoustic radiation are investigated by the direct boundary element method.
使用ANSYS有限元软件建立带有推进轴系的潜艇尾部结构模型，用直接边界元方法进行潜艇尾部结构水下辐射噪声特性分析。
The current software ANSYS is adopted in this paper, and a coupling analyses method is established too. By using APDL language, the program for coupling field calculation is made.
文中使用了通用有限元软件ANSYS，采用了多场耦合的分析方法，并利用APDL语言编制了相应的耦合场计算程序。
This paper study the lateral braces by the analysis of classic theory and ANSYS limited member, and presents the design method of non-full braces.
本文以经典理论分析和ANSYS有限元分析对侧向水平中心支撑进行系统地研究，得出在现有的设计要求下不完全支撑的设计方法。
In view of this insufficiency, using the ANSYS probability design method can not only consider the stress and the intensity change, but also the different consequence after failure.
针对此不足采用ANSYS概率设计方法，不仅考虑了应力和强度的变化，又考虑了失效的不同后果。
This article uses the ANSYS software and analysis design method to make a detailed finite element stress analysis of the head of valve body where placed the quarter rings.
利用ANSYS软件及其分析设计方法，对阀体中腔安装四合环的位置进行了有限元应力分析。
The thermal stress during spraying is simulated and analyzed by element birth and death method with ANSYS software.
本文运用ANSYS软件，采用死活单元法对离子喷涂的涂层热应力进行了有限元计算，并进行了定性的分析。
Introduced USES the ANSYS software establishment hydraulic power support hoisting jack the method.
介绍了利用A NSYS软件建立液压支架千斤顶的模型方法。
Analyse the traveling wave induction launcher temperature field with the method of ANSYS electromagnetic analysis (thermal coupling module).
用ANSYS分析电磁——热耦合的方法，分析了行波发射器的温度场。
The process of transverse low-speed impact of composite laminated plate was simulated by using finite element soft package ANSYS and method of transient analysis.
采用ANSYS有限元程序对复合材料层合板横向低速冲击进行模拟，采用瞬态分析方法来研究层合板的冲击与损伤过程。
Then simulating calculation of profiles and soundings of the DC electro-exploring method are numerically carried out, supported by ANSYS that is a software based on the finite element analysis method.
先从理论上作了分析，然后利用ANSYS软件进行了直流电阻率剖面和电阻率测深法的模拟计算。
The seismic properties of the structure with suspending coal hoppers and the structure with supporting coal hoppers are analysed by the method of response spectrum method with ANSYS.
利用ANSYS有限元分析软件，用反应谱法分析了丰镇火力发电厂采用煤斗悬吊结构与传统的煤斗支承结构在地震作用下的结构反应特点。
Two methods considering dynamic water pressure in ANSYS were studied, which were finite field addition mass method and sequence weak coupling solving method.
重点研究了在ANSYS中考虑动水压力的两种方法，即有限域内附加质量法和顺序弱耦合算法。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
应用推荐