By ANSYS finite element software, the test beams were simulated and analyzed.
通过ANSYS非线性有限元软件，对试验梁进行了模拟分析。
Make use of table analysis, modal analysis of ANSYS finite element software motive force to analyze shake stress analysis of the arch dam.
利用ANSYS有限元软件动力分析中的谱分析、模态分析功能，对拱坝进行地震动应力分析。
And then the ANSYS finite element software is adopted to simulate the temperature field of the actual walls, which directly shows the temperature distribution of the computational zone.
然后利用ANSYS有限元软件对实测墙体的温度场进行模拟，直观的表示出温度分布情况。
Using the finite element method software ANSYS, the stator temperature field of the hydroelectric generator is analyzed and calculated, the corresponding temperature field picture is given.
在此基础上应用有限元法的通用软件ANSYS，对大型水轮发电机定子温度场进行分析与计算，绘制了相应温度场图。
Based on heat transferring, a thermal field model of Laser Inner Cutting system was established and numerically simulated with the help of finite element software ANSYS.
在传热学的基础上建立了激光焦点在透明材料内部作用时的温度场模型，借助于大型有限元分析软件ANSYS进行了数值模拟。
And ANSYS is a large scale general finite element analysis software with abroad application.
而ANSYS是得到广泛应用的大型通用有限元分析软件。
The thermal module of the finite element software ANSYS is used to analyze the heat transfer of the gearbox.
该研究使用ANSYS有限元软件的热分析模块进行变速箱热传导分析计算。
The stator's characteristics of vibration and input impedance were analyzed by using the finite element software ANSYS. A new decoupling method between the two vibrators was presented.
对电机的运行机理进行了分析，并利用有限元软件ANSYS分析了电机定子的振动特性和阻抗特性，同时提出了一种振子间解耦的方法。
The magnetic distribution of the single-coil and dual-coil magnetic rheological dampers with the same effective piston length was analyzed by using the finite element ANSYS software.
采用有限元ansys软件，分析了相同活塞有效长度下的单线圈与双线圈结构磁流变阻尼器的磁场分布情况。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
Firstly, this paper introduces the realize process of optimal sensor placement in a plane frame structure with model analysis result using finite element software ANSYS.
首先利用平面框架结构的模型实验，借助有限元软件ANSYS，利用模态分析结果，实现了基于有限元理论的传感器优化布置。
Under the condition of three kinds of nonlinearity the stress and strain distribution of the road wheel is calculated with finite element analysis software ANSYS.
建立了负重轮的三种三维有限元力学模型，在考虑三重非线性的情况下，用ANSYS有限元分析软件计算了负重轮的应力应变分布。
The differential equation can be solved by finite element technique, and the calculation process was done by the finite element technique software ANSYS.
应用有限单元法对温度场微分方程进行求解，计算过程借助有限元分析软件ANSYS完成。
The driving wheel's axle is a key parts of the billet transport vehicle, so the axle's stress and deformation were analysed by the structure finite element analysis software ANSYS.
主动车轮轴是钢坯运输车的关键零部件，采用结构有限元分析软件ANSYS分析了该轴的应力和变形。
The author applied ANSYS finite-element standard calculation software through the strength analysis, which assured the reliability of the analysis.
在整个强度分析中，作者应用了ANSYS有限元标准计算软件，保证了分析的可靠性。
ANSYS is a general finite element analysis software. And mesh dividing is an important part of finite element analysis with ANSYS.
ANSYS是一个大型通用的有限元分析软件，网格划分是利用ANSYS进行有限元分析的一个重要环节。
According to the basic structure and operating principle of wedge backstop, analyzes the wedge for mechanics and gives the finite element analysis by ANSYS software.
根据接触式楔块逆止器的基本结构及工作原理，对楔块进行力学分析，并利用ANSYS软件进行有限元分析。
This paper simulates the temperature field associated with laser surface quenching using ANSYS - a finite element analysis software, and a series of studies are carried out based on this simulation.
本文结合先进的大型有限元分析软件ANSYS，对激光表面淬火的温度场进行有限元模拟，并在此基础上，对此展开一系列研究。
The finite element model of this sensor is built by applying the finite element analysis software ANSYS.
用有限元分析软件ANSYS建立了该传感器的有限元模型。
In this paper, the static analysis of Hydroplan of hydropower station engineering of Xianrendong is performed by using the finite element software of ANSYS.
本论文通过有限元分析软件ANSYS对贵州省纳雍县仙人洞水电站的厂房工程进行了结构静力分析。
A method of optimum design on active vibration control system of piezoelectric smart structure using finite element analysis software ANSYS was introduced.
介绍了利用有限元分析软件ANSYS，对压电智能结构的主动振动控制系统进行优化设计的方法。
The sustainability of perforating casing with screw holding is analysed by using the finite element software ANSYS.
文章利用ANSYS有限元分析软件，对螺旋布孔射孔套管的承载能力进行了分析。
Finite element software of ANSYS has been used for making a finite element analysis of a certain type of ball-socket nozzle's pendulous socket in solid-rocket engine.
本文应用an SY S有限元分析软件，完成了对某型号固体火箭发动机珠承喷管摆动接头的有限元分析。
This paper adopting finite element analysis software ANSYS to analyze the buckling property of slant-legged rigid-frame bridge in cantilever construction stage and service phase.
结合工程实例，采用ANSYS有限元分析软件对某斜腿刚构桥在悬臂施工及运营阶段的屈曲特性进行分析。
The stress and temperature distribution were computed by the finite element software ANSYS for the two instances of steady operation and starting-up.
通过有限元软件A NSYS，分别计算了启动和稳态操作情况下， 加氢反应器筒体的温度分布和应力分布。
Based on secondary development technology, the large universal finite element software ANSYS could remedy its inadequate specialization with APDL language.
大型通用有限元软件ANSYS可以利用APDL语言，通过二次开发技术，弥补本身专业化不足的缺陷。
Based on secondary development technology, the large universal finite element software ANSYS could remedy its inadequate specialization with APDL language.
大型通用有限元软件ANSYS可以利用APDL语言，通过二次开发技术，弥补本身专业化不足的缺陷。
应用推荐