The present structural modeling method is validated through ANSYS FEM software for the case of a composite box beam.
目前的结构化建模方法进行了验证，通过ANSYS有限元分析软件的复合箱梁的情况下。
In this thesis, stress analysis and calculation for a large oxidized reactor considering are made by using ANSYS FEM code.
本课题用ANSYS软件对某大型氧化反应器流固耦合进行了有限元应力分析计算。
Subsequently, the effects of damping gap width and the characteristics of damping media on the dynamic shock response of component was studied with ANSYS FEM technology.
随后，采用ANSYS有限元模拟技术分别研究器件阻尼带隙宽度及其阻尼介质特性对器件动态冲击响应特性的影响。
This article studies based on light truck driver axle of QX1060, discusses in detail from the UG software parametric modeling, establish of ANSYS FEM model, and the boundary conditions imposed, etc.
本文以轻型载货汽车驱动桥壳为研究对象详细论述了从UG软件中的参数化建模到ANSYS中有限元模型的建立、边界条件的施加等研究。
Based on FEM software ANSYS, the dendrites stress states are computed using the results of the melt flow as computing parameters.
使用有限元软件ANSYS，把熔体流动计算结果作为参数，计算了枝晶的受力状态。
Utilized general FEM software ANSYS to establish mechanical model and solve.
并利用通用有限元软件ANSYS建立其力学模型并求解。
Basic theory of nonlinear FEM analysis and its realization in ANSYS were studied. Accomplish stability analysis of high arch dam abutment based on nonlinear FEM analysis.
因此对大型结构分析软件ANSYS的三维非线性计算功能进行了深入研究，在此基础上完成了基于非线性有限单元法的高拱坝坝肩稳定计算分析。
The FEM model of rapier loom frame is established with ANSYS software.
利用ANSYS软件建立了剑杆织机机架的有限元模型。
In this paper, the statical stresses of the C-arm is studied through using ANSYS software by FEM and experiment.
本文采用有限元分析方法，运用ANSYS软件，对C臂的静态应力进行了深入的研究。
Using the FEM tool ANSYS to do analysis on the levitation and propulsion systems of high-speed maglev vehicle and the levitation system of low-speed maglev vehicle.
运用有限元分析软件ANSYS对高速磁浮列车的悬浮和牵引系统以及低速磁浮列车的悬浮系统进行了全面的分析。
The finite deformation elastic-plastic finite element formula are given. Based on the ANSYS software, the application of elastic-plastic FEM on metal plastic process field is outlined.
给出了有限变形弹塑性有限元列式，基于A NSYS软件平台，介绍了弹塑性有限元法在金属塑性加工领域中的应用。
The FEM software ANSYS was employed to analyse and simulate the flow velocity in L shape sheet extruder die based on a three dimensional model.
利用大型有限元计算软件ANSYS进行以三维模型为基础的L型机头内部流动速度分析和模拟研究。
In the part of theory calculation, utilize general FEM software ANSYS, calculate the tubular joints, then summarize the hot-spot location and the SCF of joints.
理论计算部分运用大型通用有限元软件ANSYS，对管节点进行了应力分析并计算了热点应力及应力集中系数。
Based on the experiments of G550 cold-formed thin-walled steel roof truss structures, an analysis model considering geometry and material non-linearity is established using general FEM software ANSYS.
基于已完成的G550冷弯薄壁型钢屋架结构承载力试验，采用通用有限元软件ANSYS，建立考虑材料和几何非线性的分析模型。
A simulation study was made of the centrifugal stresses exerted on a grinding wheel by means of a visual numerical simulation technique, using the FEM software ANSYS.
应用可视化数值模拟方法，借助于大型通用有限元软件ANSYS建立砂轮回转的数学模型，对离心应力进行了仿真研究。
The contact element analysis of ANSYS is a kind of FEM contact analysis.
而ANSYS中的接触单元分析方法就是一种有限元接触分析方法。
FEM analysis of a kind BRB applicable to space structures was conducted by using software ANSYS. The hysteresis curve of the BRB was obtained.
利用ANSYS程序对一种适用于网壳结构的屈曲约束支撑进行有限元分析，得到支撑的滞回曲线。
The whole procedure of a foundation pits excavation and its soil-nailing support is simulated with the FEM software ANSYS.
通过有限元数值分析软件ANSYS对深基坑开挖与土钉支护的全过程进行了模拟。
In this article, the large FEM software, ANSYS, was employed to simulate the temperature field and the pressure field.
本文利用大型有限元模拟软件ANSYS对大高径比柱形挤压铸件的温度场和应力场进行了数值模拟。
After establishing FEM model of circular saw by using large-scale FEA software ANSYS, the static and dynamic property of it were analyzed.
本文应用通用有限元软件ANSYS建立了圆盘锯的有限元模型，对圆盘锯的固有特性和动态特性进行了理论分析。
The parametric finite element model (FEM) of wedged-ring joint structure was established using ANSYS parametric design language (APDL).
利用APDL语言对ANSYS软件进行二次开发，建立楔环连接结构的参数化有限元模型。
Using FEM software of ANSYS to calculate vertical and horizontal bending beam, referencing the theoretical value, the appropriate subdivision number about beam is obtained.
用软件ANSYS进行简支梁的纵横弯曲计算，参照理论解，根据精度要求提出梁的参考剖分份数。
The double sides pressurized hydroforming process of metal sheet is numerically simulated by applying the commercial FEM software ANSYS/LS-DYNA.
应用商用有限元软件ANSYS/LS-DYNA，对板料的双向加压液压胀形过程进行了数值模拟。
This paper sets up the FEM model of the composite structure through ANSYS, simulates the floor, truss, shear connector by the shell, rigid frame and connector elements.
本文建立了交错桁架结构体系的楼板与钢桁架ANSYS模型，把楼板、钢桁架杆件和剪力连接件分别用板单元、刚架单元和连接单元这三种单元来模拟。
Based on the process of electric field analysis and optimum design, the shape of the conformal anode used in electrodeposition is designed by the use of the FEM software, ANSYS.
利用ANSYS有限元软件，通过电场分析和优化设计，对电沉积技术中所用的象形阳极进行了形状设计。
In order to test and verify the heat radiation of the CPU heat sink, the authors have conducted a thermal simulating analysis on the basis of ANSYS program of FEM.
为了验证研制出的CPU散热器的散热效果，利用有限元分析软件ANSYS对该CPU散热器进行了散热分析。
In order to estimate the maximal shock load which could be withstood by the enclosure of switchgear, the FEM software ANSYS was introduced to analyze and calculate the shock load.
为了估算开关柜壳体所能承受的最大冲击载荷，采用大型有限元计算软件ANSYS进行了分析和计算。
The paper analyzes cantilever with 'v' shaping groove in FEM methods of ANSYS, then discusses the effect of crack growth in different loading ways.
采用AN -SYS有限元软件对环状V型缺口悬臂件进行了有限元分析，对不同的加载方式影响断裂的扩展进行了初步探讨。
With the help of macro file compiled in APDL under FEM software ANSYS, two example of bridge is analysed and the result is compared with the data obtained by the program analysis.
用APDL编制宏文件，采用有限元软件ANSYS对两个实例进行了分析，并和本文程序分析值进行了结果对比。
With the help of macro file compiled in APDL under FEM software ANSYS, two example of bridge is analysed and the result is compared with the data obtained by the program analysis.
用APDL编制宏文件，采用有限元软件ANSYS对两个实例进行了分析，并和本文程序分析值进行了结果对比。
应用推荐