The FEM model of rapier loom frame is established with ANSYS software.
利用ANSYS软件建立了剑杆织机机架的有限元模型。
Utilized general FEM software ANSYS to establish mechanical model and solve.
并利用通用有限元软件ANSYS建立其力学模型并求解。
Vibrating characteristic is analyzed on an engine vane with the software ANSYS.
用ANSYS软件对某发动机叶片的振动特性进行了分析。
ANSYS is a general calculation software of finite element with strong function.
ANSYS作为通用的有限元计算软件，有着强大的计算功能。
Satisfying effect in section optimization is obtained by optimum design of ANSYS.
使用ANSYS优化技术进行断面优化，取得了满意的效果。
And ANSYS is a large scale general finite element analysis software with abroad application.
而ANSYS是得到广泛应用的大型通用有限元分析软件。
The modelling method of applying ANSYS to match model parameter according to the testing data.
以实测动力特性参数为依据，应用ANSYS拟合模型参数的建模方法。
Optimum design of the composite shell of pulse motor has been presented using ANSYS soft ware.
采用ANSYS软件对脉冲发动机复合壳体进行了优化设计研究。
The process of local heating and local cooling on cylinder billet is analyzed by the ANSYS software.
运用AN SYS软件对圆柱体坯料局部加热和局部冷却过程进行了热分析。
The thermal module of the finite element software ANSYS is used to analyze the heat transfer of the gearbox.
该研究使用ANSYS有限元软件的热分析模块进行变速箱热传导分析计算。
With help of ANSYS software, the short circuit electromagnetic force is calculated and analyzed for an enclosed busbar.
借助ANSYS软件对封闭母线进行短路电动力计算和分析，并与理论计算值进行比较。
In the forth chapter, the important parts of the EGO are simulated by ANSYS software in order to get the optimized result.
第四章是用ANSYS工程分析软件对氧传感器的重要部件进行模拟，得出最优化的结果，并用试验进行论证。
In this thesis, stress analysis and calculation for a large oxidized reactor considering are made by using ANSYS FEM code.
本课题用ANSYS软件对某大型氧化反应器流固耦合进行了有限元应力分析计算。
The temperature change of knitting needles during quenching in the mesh-belt furnace was simulated using the ANSYS software.
针对织针网带炉淬火，利用有限元分析软件ANSYS，对织针加热过程中的温度变化进行了模拟。
Based on FEM software ANSYS, the dendrites stress states are computed using the results of the melt flow as computing parameters.
使用有限元软件ANSYS，把熔体流动计算结果作为参数，计算了枝晶的受力状态。
ANSYS is a general finite element analysis software. And mesh dividing is an important part of finite element analysis with ANSYS.
ANSYS是一个大型通用的有限元分析软件，网格划分是利用ANSYS进行有限元分析的一个重要环节。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
The results of transient temperature field calculated by finite difference method and ANSYS software agree with the experimental results.
高压氮气淬冷温度场的有限差分法计算结果和ANSYS有限元分析软件计算结果与实测结果吻合较好。
This article, based on ANSYS software, has set up the entity unit model of the frame structure, and made a research on static and dynamic analysis.
本文基于ANSYS软件建立了车架结构的实体单元模型，对汽车车架结构进行静力和动力分析的研究。
Under the condition of three kinds of nonlinearity the stress and strain distribution of the road wheel is calculated with finite element analysis software ANSYS.
建立了负重轮的三种三维有限元力学模型，在考虑三重非线性的情况下，用ANSYS有限元分析软件计算了负重轮的应力应变分布。
The engineering instance is calculated by ANSYS, the popular software for the finite elements analysis, and the results is same as that calculated by common method.
采用目前比较流行的大型有限元分析软件ANSYS对算例进行了分析计算，结果与常规计算方法的结果相符；
The seismic capacity of the box-shaped joint in the reinforced concrete mega-frame structure system is studied, and the finite element analysis is done with ANSYS .
本文对钢筋混凝土巨型框架结构箱形节点抗震性能进行了试验研究及ANSYS程序有限元分析。
Besides, ANSYS is a large general-purpose software, which can be used to analyze static, dynamic, harmonic response and transient dynamic analysis of the machine tool.
ANSYS软件是一种大型通用的有限元分析软件，可以准确的进行机床的静力、模态、谐响应以及瞬态动力学的有限元分析。
Using general-purpose finite element program ANSYS, a three-dimensional finite element model of interaction between raft foundation and groundwork soil is established.
结合大型有限元软件ANSYS，建立了筏形基础地基相互作用体系的全三维有限元模型。
Based on heat transferring, a thermal field model of Laser Inner Cutting system was established and numerically simulated with the help of finite element software ANSYS.
在传热学的基础上建立了激光焦点在透明材料内部作用时的温度场模型，借助于大型有限元分析软件ANSYS进行了数值模拟。
Basic theory of nonlinear FEM analysis and its realization in ANSYS were studied. Accomplish stability analysis of high arch dam abutment based on nonlinear FEM analysis.
因此对大型结构分析软件ANSYS的三维非线性计算功能进行了深入研究，在此基础上完成了基于非线性有限单元法的高拱坝坝肩稳定计算分析。
Basic theory of nonlinear FEM analysis and its realization in ANSYS were studied. Accomplish stability analysis of high arch dam abutment based on nonlinear FEM analysis.
因此对大型结构分析软件ANSYS的三维非线性计算功能进行了深入研究，在此基础上完成了基于非线性有限单元法的高拱坝坝肩稳定计算分析。
应用推荐