A great quantity of any Angle strain rosette readings was gathered in structural test, the principal strain and the principal direction were calculated by computer program written in this paper.
在结构试验中采集得到的成百上千个任意角度应变花的读数,可用本文编写的计算机程序确定其主应变及主方向,从而替代了科研人员大量的手工计算。
It can be set to a 15-degree Angle — optimal for holding the device and reading, saving any strain on your wrists for other, less cerebral activities.
可以把它调节成15度倾角,这样最适合阅读,而且缓解你腕部的压力。
Angular stiffness and elastomer shear strain on maximum swinging Angle are important indexes in flexible joint design of solid rocket motor.
角刚度(又称弹性比力矩)及弹性件在最大摆角下的剪切应变是固体发动机柔性接头设计的重要指标。
The influences of the Angle of internal friction, the Angle of wall friction to the direction of principal strain rate are analyzed.
分析了内摩擦角、壁面摩擦角对最大主应变率方向的影响。
In the condition of eliminating the lagging strain of Angle iron, the magnitude of pre-stress putting on the Angle iron has litter impact on the ultimate bearing capacity of structure.
在消除角钢应变滞后的条件下,对角钢施加预应力的大小对结构最终承载力无明显影响。
Objective To study the influence of incidence angle of ultrasound and strain length(SL) on strain imaging(SI) and strain rate imaging(SRI) in long-axis direction.
目的探讨室壁与入射超声之间的夹角及应变长度(SL)对长轴方向应变成像(SI)和应变率成像(SRI)的影响。
When the fault displacement is same, the maximum axial compressive strain of the buried pipeline with different crossing Angle is very close.
在相同的断层位错作用下,不同穿越角度的埋地管线的最大轴向压应变十分接近。
Secondly, the FLAC 3D was used to simulate planar multiple shear bands and friction angle and cohesion force were dependent on plastic strain.
之后采用FLAC3D对平面剪切带网络进行了数值模拟,其中摩擦角及内聚力为应变软化。
The tensile displacement and angle of rotation of tensile strain localized band are analyzed in strain softening stage and in real crack propagation stage based on gradient-dependent plasticity.
基于梯度塑性理论,分析了应变软化及真实裂纹扩展阶段的局部化带的张拉位移和转角。
Local strain concentration in angle-ply lay caused by transverse crack of circular lay in composite pressure vessel was studied by means of advanced shear-lag method.
利用改进的剪切滞后法,研究了组成纤维缠绕压力容器中的环向层的横向开裂而在纵向层中引起的局部应变集中。
Furthermore, by adjusting the size of mirror and hinge, the thickness of the strain bilayer and the top layer, which affect the rotation Angle of the mirror, simulation analysis was carried out.
通过分别调整镜面和铰链尺寸、应变双层厚度和上盖层厚度,仿真分析了镜面的线度、角度和平整度对旋转角度的影响。
The elastic parameters of anisotropic rocks are the functions of plastic strain and loading Angle.
推导出各向异性岩石弹性变形参数是塑性应变和加载角度的函数。
The strain of the thin-walled ring section beam is investigated theoretically and experimentally. The result shows the local strain varies as the cosine function of twice the positional angle.
对圆环形薄壁截面梁的应变进行了理论与实验分析,结果表明圆环形薄壁截面梁各点应变与该点角度的二倍呈余弦变化关系。
The experiment results show that composites with large braiding Angle have complex crack forms under uniaxial tensile loading and the tensile stress-strain curves take on nonlinear characters.
实验数据表明:大编织角复合材料在单向拉伸作用下的破坏形式较为复杂,其应力-应变曲线呈现非线性特性。
Based on genetic neural network and modal strain energy, a two-stage method for detecting diagonal cracks is proposed to identify the location, Angle and depth of diagonal cracks in beams.
基于遗传神经网络与模态应变能,提出了一种斜裂缝两阶段诊断方法,识别梁体中斜裂缝的位置、角度和深度。
The results show that the loss of mechanical energy, the loss angle and the accumulation of the large elastic strain energy can be used to evaluate covering properties of carpets.
结果表明,机械能量损耗、损耗角及累积最大弹性应变等指标能评定地毯的铺地性能。
Objective: To analyze the influence of different tilted angle on the distribution of the stress, strain and displacement on the implant_bone interface.
目的:分析不同倾斜种植对种植体界面应力、应变及位移分布状况的影响。
Then the experimental data of joints of top and seat angle with double web angle are analyzed and load-strain curves of member subassemblages key points are drawn.
为此对双腹板、顶底角钢半刚性节点的试验数据进行分析,绘出试件各组合件关键点的荷载-应变关系曲线。
When it was tensile failure, the curve of stress-strain relationship was softening and the reinforcement only increased the angle of internal friction of soil.
当发生拉断破坏时,其应力-应变曲线为软化型,此时加筋仅增加土体的粘聚力分量;
It is evident that the effects of strain-induced recrystallization on grain refining and on high-angle grain boundary fraction increasing affect greatly the superplastic properties of the alloy.
研究指出,应变诱发再结晶对细化晶粒和提高大角度晶界分数的作用明显地影响合金的超塑性能。
The stress, the strain value in Angle place is bigger than attaches other spots.
接头端角处的应力、应变值大于接头其他部位的应力、应变值。
This paper presents the information of the effect, measured with a tele-strain-meter, of work material, feed, cutting speed, depth of cut, number of teeth and helix Angle etc.
本文在高速滚齿机上,利用遥测应变仪,测定了工件材料,进给量,切削深度,切削速度,齿轮齿数及螺旋角等对力矩的影响,并得出径节为8时的力矩公式。
This paper presents the information of the effect, measured with a tele-strain-meter, of work material, feed, cutting speed, depth of cut, number of teeth and helix Angle etc.
本文在高速滚齿机上,利用遥测应变仪,测定了工件材料,进给量,切削深度,切削速度,齿轮齿数及螺旋角等对力矩的影响,并得出径节为8时的力矩公式。
应用推荐