Because there are different ways to build a gear reduction unit, eg chain and sprocket or gearbox, we are only showing you the setup Angle of the muller.
由于有不同的方法来建立一个齿轮减速装置，如链及链轮或变速箱，我们只显示您的马勒设置的角度。
In this paper calculating method of lead angle of helical gear by measuring span length of length bar and base tangent length is put forward and lead angle calculating formula is deducel.
分析齿轮主要参数，提出用测量跨棒（）和公法线长度计算斜齿圆柱齿轮螺旋角的测绘方法，并推导出螺旋角的计算公式。
The thesis presents a practical die structure with Angle pin and gear shaft and rack for secondary combined inclined down loosing core of die casting hopper bodies.
本文给出了浮子室体铸件斜销-齿轴-齿条二级联合斜下抽芯压铸模实用结构，论述了模具结构特点和工作过程。
It is expounded here the primary principles of eccentric gear tension compensation system that changes roving shape Angle on A454 roving frame.
本文叙述了A454型粗纱机应用偏心齿轮式张力补偿装置，导致粗纱成形角变化的基本原理。
A kind of calculation method for outputting motion error and return stroke error Angle of less toothed gear drive system was provided.
提供了一种少齿数齿轮传动系统输出运动误差和回程误差角的计算方法。
The helix angle is the same on each gear , but one gear must have a right-hand helix and the other a left-hand helix.
螺旋角度是相同的在每个之上齿轮，但是一齿轮一定有一个用右手的螺旋和另一个一个左侧的螺旋。
This paper presents a practical method to calculate the pressure angle at pitch cylinder, of gear drive with computer.
本文提出了一种利用计算机计算齿轮传动啮合角的简便易行的方法。
The mathematical model presented in this paper can also be used in the regrinding of gear hobs with zero rake Angle and positive rake Angle for error calculation and revision.
文中的数学模型亦可用于零前角及正前角齿轮滚刀重磨后的齿形误差计算及修正。
Based on analyzing the gear parameters, the grinding of the gear face with an end face of the grinding wheel was realized by changing the rotating Angle of rotating table.
在对齿轮参数进行数学分析的基础上，通过改变数控回转台的旋转角度，实现了用砂轮的一个端面去磨削齿轮的齿面。
There is no common normal in the conical involute gear and the fixed chordal tooth thickness can not be measured accurately because of the coexistence of helix angle and taper.
渐开线锥形齿轮由于同时存在锥度和螺旋角，使得其固定弦齿厚无法精确测量，也没有公法线。
The conjugate principle of the variable ratio gear with constant center distance and constant contact Angle has been analysed.
研究了定中心距、定啮合角变速比齿轮的啮合原理。
According to the volume oil formula of the straight gear pump, the volume oil formula of the helical gear pump is got and the helix Angle no trapping is found.
利用直齿齿轮泵的困油容积变化公式，求出了斜齿齿轮泵的困油容积变化公式，得到了斜齿齿轮泵不发生困油的螺旋角。
Generally, standard gear hobs are only used to machine gears with the same modul, pressure Angle as hobs themselves.
在一般条件下，标准齿轮滚刀只能加工与其模数、压力角相同的同制齿轮。
When turning gear from middle to maximum angle of steering gear, the suction and outlet pressure must be attention.
在将舵从中位转至最大舵角时应注意进，回油油路压力值。
The polar equation of non-circular gear pitch curve, calculation method of center distance, formula of pitch curve length, primary circle radius and pressure Angle is given.
给出了非圆齿轮的节曲线极坐标方程，两齿轮中心距的计算方法，节曲线长度、基础圆半径和压力角的计算公式。
When a target roller is determined, the rotation Angle and the rotation direction of the selected roller are calculated by a master gear rotation Angle calculation part (11).
并且，如果对象缩小，则被选择的辊的旋转角度包含旋转方向，由母齿轮旋转角度运算部(11)算出。
The method and procedure of measuring and calculating involute spur gear geometrical parameters such as tip diameter, module, modification coefficient and pressure Angle were shown in this paper.
本文阐述了渐开线直齿圆柱齿轮顶圆直径及齿轮模数、变位系数和压力角等参数的确定方法和步骤。
The scraping cutter is used with an oblique Angle to cut a gear, and the working Angle is changed during scraping.
弧齿锥齿轮刮削刀盘采用了斜角切削，在刮削过程中工作角度发生了变化。
Then the locus curves of one point in the geared five-bar were studied with the change of the gear ratio, the phase Angle, the bar length and the Angle between two bars.
然后，针对能够整周转动的齿轮—五杆机构，研究了其上的一点在齿轮机构的传动比、初始相位角、杆长以及两杆之间的夹角变化时的轨迹曲线以及速度和加速度曲线的情况。
The experimental results show that order tracking analysis and Angle domain average technique can effectively diagnose the faults of the gear crack.
通过对齿轮齿根裂纹故障实验信号的分析，表明该方法能有效地诊断齿轮的裂纹故障。
The equabions on tooth shape of internal gear by means of envelope method is derived and the pressure angle, inflection point, curvature, topcut are analysised in detail.
用包络法导出了内齿轮的齿形方程，对压力角、曲率、拐点、顶切进行了详细分析，并给出了计算公式。
The way of calculating the parameters of modulus, pressure angle and helix angle of the gear masters that are used to calibrate gear instruments is in detail in this paper.
本文详细介绍了用于齿轮仪器校准的齿轮样板模数、压力角、螺旋角等参数计算方法。
Analyze the Helical Gear Pump for the instant displacement, single gear displacement, theinstant change ratio and change value of trapping volume and the influnce of screw angle in detail.
详细分析了斜齿齿轮泵的瞬间排量、单齿排量、困油区容积的瞬间变化率及变化量、螺旋角的影响。
Of all the gear frequency errors, the non-linear dynamic characteristics of gear tooth error, pressure angle error and sprial fluctuation error are compared with the results of the linear system.
在齿频误差中，分析了齿形误差、压力角误差和螺旋线波度误差激振下，转子系统的非线性振动特性，并与按线性模型计算的结果进行了对比。
This method has some value in solving the problem of option of the planet gear wheel system of positive Angle change position drive.
该优化方法的处理，对解决正角变位传动行星轮系的优化问题，有一定价值。
High tooth gear has small module, small pressure Angle, and large addendum to enlarge the transverse contact ratio, improve gear strength, and reduce the noise.
细高齿齿轮是采用小模数、小压力角、大齿顶高来加大端面重合度，达到提高齿轮强度、降低噪声的目的。
Consequently, the operator can visually confirm the nip of a target gear without worrying about the rotation direction and the rotation Angle of the master gear (18).
由此，操作者不用特别在意母齿轮(18)的旋转角度、旋转方向，就能够视觉辨认对象齿轮的压印线。
Instead, and as their name implies, the teeth on a helical gear are inclined at an Angle so that each tooth wraps on the gear's cylinder in the shape of a shallow helix.
反之，并作为其称号所暗示地，牙齿上地螺旋齿轮倾向于一个角度，使每一个齿完毕对齿轮地圆筒外形地浅螺旋。
Instead, and as their name implies, the teeth on a helical gear are inclined at an Angle so that each tooth wraps on the gear's cylinder in the shape of a shallow helix.
反之，并作为其称号所暗示地，牙齿上地螺旋齿轮倾向于一个角度，使每一个齿完毕对齿轮地圆筒外形地浅螺旋。
应用推荐