• And the designed sensor can also be used to measure some other types of linear displacement or rotation Angle.

    所设计的传感器稍作改动,也可以用来测量其他形式的线位移或角位移。

    youdao

  • The main effect affected by material feature is lateral displacement, then the loading height and slant Angle.

    横向位移受物料形态影响最大,其次是装料高度和斜面倾角。

    youdao

  • Input layer is respectively the displacement and speed of car, the Angle and Angle speed between pendulum bar and vertical line.

    输入层分别为小车的位移和速度、摆杆偏离铅垂线的角度和角速度。

    youdao

  • Influences of axis inclination, length, clamping Angle of anchorage, roughness and bonding degree of interface on the displacement of anchorage and repose stability of rock mass were explored.

    就锚碇体轴线倾角、长度、夹持角、接触界面粗糙度及结合程度对锚碇位移和岩体安息稳定性的影响作了深入探讨。

    youdao

  • When the traction Angle was constant, the displacement and stress of the cervical column as well as the deformation of intervertebral space were all increased with the enhancing of traction force.

    当牵引角度不变时,随牵引力的增大,颈椎的位移及各点的应力均增大,椎间隙的形变亦更明显。

    youdao

  • In this paper, the distribution of stress and displacement of the special arc triangle components is solved by using the Angle division iteration method of finite element analysis.

    采用角度细分逐次迭代的有限元分析方法解决了特殊圆弧三角形部件应力和位移分布问题。

    youdao

  • The vertical spectrum displacement in the output pulse is calculated and shown quantitatively as function of the Angle between the grooves.

    计算了输出脉冲的垂直谱位移,并将其作为刻线夹角的函数进行了分析。

    youdao

  • In this paper, effect of the dip Angle, stiffness and design depth of bolt on the horizontal displacement of tension anchor supporting structure was carried out by FLAC3D.

    利用FLAC3D商业软件对基坑工程拉锚式支护结构的锚杆设计参数(锚杆长度、锚杆倾角、锚杆刚度以及锚杆设置深度)对支护结构水平位移的影响进行了数值模拟。

    youdao

  • A dynamic feature model of strokes contains not only acceleration and tilt Angle, but also velocity, displacement and stroke trace.

    笔画动态特征模型除了包括加速度和倾斜角特征外,还包括笔杆的速度和位移特征及形成的笔画轨迹特征。

    youdao

  • According to the proposed algorithm, the relative displacement on the projection angle of high and low sinograms is detected using correlation coefficient.

    该方法利用相关系数来检测高低能正弦图投影角度方向的相对位移。

    youdao

  • Stepper motor is a motor controlled by digital signal, which converts pulse signal into Angle displacement. The wheeling speed is controlled by the frequency of pulse signal.

    步进电机是一种数字控制电机,它将脉冲信号转变成角位移,电机的转速由脉冲信号频率决定。

    youdao

  • By setting up the rational mechanical model and measuring the horizontal displacement to calculate the sample Angle in composite force test, the problems of the sample Angle measurement can be solved.

    在复合力试验中,通过建立合理的力学模型,利用测量水平位移量计算管样角度变化,解决了试样角度无法直接测量的问题。

    youdao

  • The recursion formulae of the node angle displacement are derived in the text and that internal forces of the beam can be solved.

    推出了求解结点转角位移的递推公式,进而求得梁的内力。

    youdao

  • The effect of vehicle vibration, including Angle displacement and linear displacement on the imaging quality of the imaging system is analyzed.

    详细分析了由动载体振动引起的角位移和线位移对成像系统的影响。角位移是影响成像质量的主要因素。

    youdao

  • The extended reach well has such characteristics as large horizontal displacement, great deviation Angle and long open hole interval.

    大位移井具有长水平位移、大井斜角以及长裸眼段的特点。

    youdao

  • We can gain the displacement equation of the slide block if we know the roll angle and pitching angle and the vertical displacement of carrier.

    在航母横摇角、纵摇角以及升沉位移已知的条件下,通过并联机构的运动学分析可以求得驱动滑块的位移方程。

    youdao

  • By the stress analysis of the differential element under different displacement modes, it is supposed that the displacement mode only influences the equivalent internal friction Angle of interlayer.

    对不同位移模式下水平微分单元进行受力分析,认为位移模式只影响了层间等效内摩擦角。

    youdao

  • The grating sensor is widely used in the modern precision measurement territory , especially in the measurement of linearity displacement and angle displacement, which has play a very important role.

    光栅传感器是现代精密测量领域中广泛应用的一种传感器,尤其是在线位移和角位移的测量中发挥着重要作用。

    youdao

  • Stepping motor is a kind of electromechanical component that is driven in step angle or line displacement by electric pulse signal.

    步进电动机是一种将电脉冲信号转换成相应的角位移的机电元件。

    youdao

  • Analyze the Helical Gear Pump for the instant displacement, single gear displacement, theinstant change ratio and change value of trapping volume and the influnce of screw angle in detail.

    详细分析了斜齿齿轮泵的瞬间排量、单齿排量、困油区容积的瞬间变化率及变化量、螺旋角的影响。

    youdao

  • This paper presents a type of Angle displacement detecting system with single selsyn.

    本文介绍了一种只用单自整角机作为角位移检测元件的检测系统。

    youdao

  • A controller of Angle displacement motor drive system based on Subsection Analysis. Fuzzy Algorithm is proposed in this paper.

    提出一种基于分段解析模糊算法的角位移电机传动系统控制器。

    youdao

  • An under actuated space manipulator control system is proposed to study the manipulator adaptive grasping control. The manipulator is equipped with vision, slipping, Angle displacement sensor etc.

    对融合了视觉、滑觉、角位移等多种传感器的欠驱动空间机械手爪,研究其对不同形状、质地的物体实现自适应抓取控制。

    youdao

  • A controller of Angle displacement motor drive system based on Subsection Analysis.

    提出一种基于分段解析模糊算法的角位移电机传动系统控制器。

    youdao

  • An area-alterable differential capacitive sensor is discussed, which can measure both displacement and angle.

    提出了一种可同时测量位移和角度的变面积式差动电容传感器的设计方案。

    youdao

  • The basic principles of multi-parameter tunable optical fiber grating wavelength tuner based on stress, displacement, space angle are analyzed and relative experimental researches are performed.

    在模拟分析的基础上,设计了一种基于应力、位移、空间角度的多参数可调谐的光纤光栅波长调谐器,并进行了实验验证。

    youdao

  • The paper introduces the basic principle of measuring displacement with laser interferometer, and gives a designing idea that realizes length measurement and angle measurement on one apparatus.

    介绍了激光干涉法长度测量的基本原理,提出在不更换和调整系统中光学器件的条件下,实现线位移和角位移—机测量集成装置的设计思想。

    youdao

  • The tensile displacement and angle of rotation of tensile strain localized band are analyzed in strain softening stage and in real crack propagation stage based on gradient-dependent plasticity.

    基于梯度塑性理论,分析了应变软化及真实裂纹扩展阶段的局部化带的张拉位移和转角。

    youdao

  • This measure system is suitable to measure linear and Angle displacement during manufacturing process of NC machine tool, and it can constitute closed loop control system with CNC system.

    该测量系统适用于测量数控机床加工过程中的直线位移和角位移,可以和CNC系统组成闭环控制系统。

    youdao

  • This paper also presents a method to solve the tunnel axis displacement on line caused by angle error between tube center axis and datum of joint.

    分析了对接面与管段中心线夹角误差对沉放后线路位置的影响,提出了控制隧道轴线偏差的措施;

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定