• youdao

  • The increase of posterior slope cut Angle significantly decreased the tibial anterior compressive strains, and significantly increased the tibial posterior compressive strains.

    在胫骨载荷方面,增加关节面后倾切除角度显著减少胫骨前面的压应力,而胫骨后面的压应力则显著增加。

    youdao

  • The scraping cutter is used with an oblique Angle to cut a gear, and the working Angle is changed during scraping.

    弧齿锥齿轮刮削刀盘采用了斜角切削,在刮削过程中工作角度发生了变化。

    youdao

  • The course which will cut each meridian at the same angle is termed a rhumb line.

    与每一子午线相交成同一角度的航向叫恒向线。

    youdao

  • The high rigid main axle structure, coordinates the ultra precise drift Angle ball bearing support localization, may make the heavy cut processing.

    高刚性主轴结构,配合超精密之斜角滚珠轴承支撑定位,可作重切削加工。

    youdao

  • The invention has advantages of rapid cutting speed, neat cut section with small slope angle and accurate location length.

    具有切割速度快、切割断面整齐坡角小、定位长度准确的优点。

    youdao

  • The result shows that by controlling cut angle and environment conditions, frequency-temperature characteristic of quartz resonators can be adjusted to meet engineering needs.

    结果表明,对切角及环境因素进行控制,可使石英晶体谐振器的频率–温度特性满足工程的需要。

    youdao

  • The influence of cut shape on cut Angle, cut height and collapsing rule is analyzed, and the mathematical models to determine cut Angle, cut height and collapsing rule are established.

    分析切口形状对烟囱的爆破切口角度、切口高度及倾倒规律的影响,建立砖烟囱和钢筋混凝土烟囱选择不同切口形状时的爆破切口角度、爆破切口高度和倾倒规律的数学模型。

    youdao

  • One time can cut off the required length and Angle.

    能够一次切出型材所需长度及两端角度。

    youdao

  • This paper describes the causes of Angle bump of float glass when conveyed at the cold end while being longitudinally cut on the production line.

    探讨了浮法玻璃在冷端输送过程中,玻璃板在主线上纵向掰断并分开所产生的两块玻璃尾端碰角的现象。

    youdao

  • Based on the limit equilibrium theory and the hypothesis of planar sliding surface, a formula for calculating the Angle of shear failure was deduced considering cohesion and cut slope Angle.

    基于极限平衡理论及平面滑裂面假定,在考虑土黏聚力及放坡角度的基础上,推导了平面滑裂面剪切破坏角的数学表达式。

    youdao

  • We recently asked him to explain the phrase "cut the Angle" and show how he USES geometry to keep his opponents from scoring.

    我们最近请他解释短语“封住角度”,并向我们展示他是如何使用几何学阻止对手得分的。

    youdao

  • Establishing an ideal shot model, Monte - Carlo numerical calculation is used to obtain hollow - shot probability, the optimal shot velocity and Angle and cut-off velocity.

    建立理想的投篮模型,运用蒙特卡罗数值计算方法得出给定点的空心中框概率,并由此得到最佳投篮速度、最佳投篮角度和截止投篮速度。

    youdao

  • Construction equipment in place: excavator, crane, welding machine, Angle grinder, abrasive cut-off machine and any other equipment.

    施工机具到位:挖掘机、吊车、焊机、角向磨光机、砂轮切割机及其它工用具。

    youdao

  • The tool point angle (TPA) is formed by the two lips and is chosen based on the properties of the material to be cut.

    两条钻唇形成钻顶角,并根据被钻削材料的性能来选取其大小。

    youdao

  • A practicable solution to the angle-digital conversion of synchro is provided, which includes cut section coding for the ratio of sine to cosine and sampling on double peak value.

    针对自整角机的轴角数字转换,提出了分区间正余弦信号相比较编码和双峰值采样的方法。

    youdao

  • The cut angle between the longitudinal axis of femoral diaphysis and tibial plateau (femur-plateau angle).

    测量股骨干纵轴与胫骨平台的夹角(股骨-平台角)。

    youdao

  • Setting main parameters of disc flying shears are presented in detail. including cut Angle, bite conditions, amount of scissors overlapping, friction coefficient and rolling speed etc.

    详细介绍了圆盘式飞剪各主要参数的确定,包括交角、咬入条件、剪刃重叠量、摩擦系数、轧制速度等。

    youdao

  • Setting main parameters of disc flying shears are presented in detail. including cut Angle, bite conditions, amount of scissors overlapping, friction coefficient and rolling speed etc.

    详细介绍了圆盘式飞剪各主要参数的确定,包括交角、咬入条件、剪刃重叠量、摩擦系数、轧制速度等。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定