It is the ideal choice of the engineering plastics and FRP manufactures.
是玻璃钢制造和工程塑料的理想选择。
For all boats the available floor are plywood, aluminum, air mattress, salt, and FRP.
所有可用的船只楼是胶合板，铝，空气床垫，盐，和玻璃钢。
Strengthening RC structures by FRP is succeed or not mainly lies on the effect of the bond behavior between the concrete and FRP.
用FRP加固混凝土结构的成功与否主要取决于FRP与混凝土之间粘结性能的优劣。
Practice shows that the sealing reliability of MOA have been enhanced by using the double sealing and excluding traditional arc-isolating cylinder and FRP rode.
实践证明，采用双重密封结构，取消传统MOA中的隔弧筒和引拔棒，提高了MOA的密封可靠性。
The effects of partic1e size and content etc. of silicate fillers on technological and mechanica1 properties of UP casting and FRP were studied comprehensively by regression and variance theory.
本文应用回归与方差分析理论，对偏硅酸盐填料的粒径、含量等对UP浇铸体与FRP 的工艺与机械性能的影响，作了较全面的试验分析。
The influence of various environments on durability of FRP was introduced in this paper. The influence of temperature on FRP material, the bond of FRP-to-concrete and FRP-to-steel are not obvious.
分析了各种环境条件对FRP耐久性的影响，结果表明：温度对FRP材料、FRP与混凝土、FRP与钢粘结界面的耐久性影响不明显；
In an effort to improve on the past, boats have been upgraded and many wooden catamarans or country boats have been replaced with fiber-reinforced-plastic (FRP) craft with outboard motors.
为了改善以前的状况，人们改造了许多船只，并用带有舷外发动机的纤维强化塑料（FRP）船只取代了许多木筏或乡村小船。
Missile packing box of FRP sandwich construction has higher stiffness, strength and stability than ribbed FRP missile packing box, it can meet higher requirement of product design.
玻璃钢夹层结构的导弹包装箱比加肋玻璃钢导弹包装箱具有更高的刚度、强度和稳定性，更能满足产品设计要求。
Based upon the analysis of the FRP characteristics, methods for design, manufacture and management of reliability of FRP products are introduced.
在分析玻璃钢特点的基础上，介绍了玻璃钢制品的可靠性设计、生产和管理方法。
The raw materials, forming process and application of FRP sonar dome are introduced.
本文介绍了玻璃钢声纳导流罩原材料、成型工艺及应用情况。
Then, the author gives the idea of the Design System for FRP Yacht, the specific actualizing course, and the specific of using method and example demonstration.
然后介绍自行设计平台的设计思想，具体实现过程，以及具体使用方法和实例演示。
The effect of environment on FRP strengthening concrete structures is related to the bond surface of FRP and concrete.
环境因素对FRP加固混凝土结构的影响主要体现在FRP与混凝土的粘结面上。
The raw materials, matrix formulations and product properties were introduced for the pultrusiened FRP bars of asymmetric bars, and the technical parameters of the product determined.
介绍挤拉成型玻璃钢高低杠杠面所用原材料、基体配方及产品性能，确定了该产品的工艺参数。
This paper introduces the characteristics of high pressure FRP pipes and its application in the oil field.
本文介绍了高压玻璃钢管道的特性及在我国油田的应用情况。
Finally, the proper applications of FRP and what the structure engineers should do are brought forward.
最后，提出了合理应用FRP及结构工程师应该做些什么的问题。
The experimental parameters were sectional shape, section size and layers of FRP jackets.
试验参数为钢管截面形状、截面尺寸和包裹FRP的层数。
It ADAPTS to manufacturing the planar, curving and complicated FRP structures.
它适合于制造平面、曲面和外形复杂的FRP构件。
The flue gas is sprayed with absorber slurry from the headers, which are made by fiberglass reinforced plastic (FRP) and equipped by ceramic made nozzles.
联箱是用纤维玻璃加固的塑料制作的，并且装配有陶瓷喷嘴。
The design and manufacture of FRP higher hood mould is discussed when we want to increase the hight of automobile body.
本文介绍了在原有玻璃钢车体组合模具上增加车型高度时，高顶模具的设计与制造。
HCH-201 for the manufacture of centrifugal casting forming the glass pipe structure layer and the general FRP products.
HCH- 201用于制造离心浇铸成型玻璃钢管道结构层和一般玻璃钢制品。
The papers introduces the application of FRP pipes and fast repairing techniques in oilfields.
本文介绍了玻璃钢管及其快速补漏技术在油田的应用。
I'm going to lay up in FRP and use it as an intermediate tool.
我要去奠定了在玻璃钢，并用它作为一个中介工具。
Of particular interest under static loading was the influence of FRP reinforcement on the strength and stiffness of beam-column connection.
特别令人感兴趣的是在静载条件下应用纤维增强塑料对增强梁—柱联接部位所起的作用。
The paper introduces the reason for adopting FRP steep embankment An-Tong expressway and the construction craft of FRP steep embankment, and points out the key technique and announcements.
本文介绍了安同高速公路采用加筋陡坡路堤的原因及加筋陡坡路堤的施工工艺，并指出了施工中的控制要点和注意事项。
The interfacial shear stress and peel stress between the FRP and the surface of tension flange were analyzed when the FRP was bonded to the tension flange of the bending members.
对受弯构件受拉翼缘外侧粘贴FRP后的界面剪应力和界面剥离应力进行了分析。
The bond durability between fiber reinforced plastic(FRP) and concrete under natural conditions was studied by normal bonding strength experiment of 65 FRP and concrete samples.
通过65个纤维增塑料（FRP）与混凝土试件的正拉粘结强度试验来研究自然条件下FRP与混凝土之间的粘结耐久性。
The choice of FRP flame retardant system and the effect of additive type flame retardant agent process and property of FRP are introduced in this paper.
本文简要叙述了玻璃钢阻燃体系的选择及添加型阻燃剂对玻璃钢工艺及性能的影响。
Due to high strength and strong corrosion-resistance, the FRP profiles are usually used to work platform, walkway, staircase under corrosive environmentally conditions.
因为拉挤玻璃钢型材具有较高的强度，良好的耐腐蚀性能，因而经常用于腐蚀环境下的工作平台，过道，楼梯。
So bonding performance of the interface and internal force translating mechanism between FRP and high strength concrete are crucial in FRP strengthening technology.
FRP与混凝土之间通过界面层传递内力，研究界面层的粘结性能和内力传递机理是FRP加固技术的关键。
So bonding performance of the interface and internal force translating mechanism between FRP and high strength concrete are crucial in FRP strengthening technology.
FRP与混凝土之间通过界面层传递内力，研究界面层的粘结性能和内力传递机理是FRP加固技术的关键。
应用推荐