It propose nonlinear dynamic analyzing model calculation method of the motor in the use of nonlinear magnetic path analysis and finite element calculation.
采用非线性磁路分析和有限元计算结合的方法给出了该电机的非线性动态分析模型计算的一种思路和方法，有助于电机设计分析。
Considering the common failure features of driving shaft and common working condition, the mechanics analysis and finite element calculation were conducted.
针对传动轴常见失效特征，结合常用工况，进行了力学分析和有限元计算。
The results from centrifugal model test, field bearing test, and finite element calculation performed for the verification of the formula showed satisfactory agreement.
据室内离心机模型试验，现场载荷试验和有限元法分析的验证，它们之间符合程度是令人满意的。
By using model test of simulated materials and finite element calculation and theory deduce, the alternate exterior entry surrounding rock stability in dynamical pressure area is systemically studied.
通过理论推导、相似模拟、数值模拟及现场测试等方法相互结合、相互补充，对动压区外错式巷道的围岩稳定性进行了较为系统的分析研究。
The optimized design scheme could be found out to content requirements of design by a method combining calculation of finite element model and optimized design.
采用整体有限元模型计算与设计优化相结合的方法，可以在满足各项设计要求的条件下找到最优预应力设计方案。
With the welding spot fatigue lifetime pre-estimation method, by combination of the finite element analysis and stress calculation, the welding spot fatigue damage under actual load can be calculated.
采用焊点疲劳寿命预估方法，通过有限元分析并结合应力计算，即可计算出实际载荷工况下的焊点疲劳损伤。
Considering the boom cross section as a whole, a parametric finite element model and a parametric optimization model for local stability calculation of a boom structure were established.
将吊臂截面作为整体考虑，建立了吊臂结构局部稳定性计算的参数化有限元模型和参数优化模型。
Comparative analysis of the results come from finite element program calculation and "code of reinforced concrete silo design" is carried out.
对有限元程序计算结果与钢筋混凝土筒仓设计规范方法计算结果进行了对比分析。
Principles of reasonable values and reference data of saw tooth's rake, relief, wedge angles and radius of bottom arc can be determined through finite element method of calculation and optimum design.
通过有限单元法计算和优化设计，确定锯片齿形前角、后角、楔角及槽底圆弧半径合理值的原则及其参考值。
This paper deals with the necessary procedures and noticeable problems of the staged - calculation method in the structure finite element analysis.
本文讨论实现分阶段计算方法的具体措施和应该注意的问题。
Compared with finite element method, the finite volume method maintains the local conservation properties of physical quantities and has a simpler calculation.
与有限元方法相比，有限体积法保持物理量的局部守恒性质，并且计算更加简单。
Compared with finite element method and finite stripe method, the given method cuts remarkably the amount of calculation work.
本方法与有限元法及有限条法相比，可使计算工作量显著减少。
The differential equation can be solved by finite element technique, and the calculation process was done by the finite element technique software ANSYS.
应用有限单元法对温度场微分方程进行求解，计算过程借助有限元分析软件ANSYS完成。
Briefly introduces the finite element model of axisymmetric field and the results of magnetic field calculation in metal.
介绍了轴对称场的有限元模型及其用于计算金属内部磁场分布的结果。
Ordinary finite element and finite difference methods are often used for seepage calculation, while storage centered finite element method is rarely applied to practice.
普通有限元方法和有限差分方法是渗流计算中常用的数值方法，而贮量集中有限元方法则很少被实际应用。
The finite element calculation of imbalance response and responding experiment are carried out aiming at the simulation rotor.
对模拟转子进行了不平衡响应的有限元计算，并进行了相应的实验研究。
With the non-line finite element method, the numberical value calculation on the stress and deformation of surrounding rock of deep mine roadways has been presented.
采用非线性有限元法，对深井巷道围岩应力及变形状态进行了数值计算。
Second, based on research and calculation method of inductance parameters for permanent magnet electrical machine, the finite element calculation and testing method of HEPMSG are presented.
其次，在对永磁电机电抗参数计算方法研究的基础上，提出了该种结构电机的交、直轴电抗参数的有限元计算和测试方法。
A pulsed solenoid magnet, which is applied for direct measurement of magnetocaloric, is designed by classical electromagnetic method and finite element numerical value calculation method.
采用经典电磁场、有限元数值计算两种方法，设计了一种用于磁热效应直接测量的脉冲螺线管磁体。
This paper used the finite element method to compute the temperature field, and combined finite element with analytic solution to develop a calculation of thermal stresses.
本文采用有限元数值分析方法计算多层圆管的温度场，并把解析解与有限元相结合，提出一种求解其热应力的计算方法。
The calculation result is reflected into the finite element calculation model, and the durability analysis of parts is carried out according to the load of the bench experiment.
将冲压计算结果反应到有限元计算模型中，根据台架实验的栽荷，进行零件的耐久性分析。
And import the model into the finite element analysis software of ANSYS for modal calculation and analysis.
进而将齿轮的参数化模型导入通用有限元分析软件ANSYS，对其模态进行计算分析。
This paper deals with a field modulated magnetic gear and its calculation with the finite element method, and provides a powerful numerical technique for designing magnetic gears.
在电机设计时，使用有限元方法对一种大力矩磁力齿轮——磁场调制式磁力齿轮进行了磁场计算，为设计该磁力齿轮提供了有力的工具。
Strengthening method was proposed on this basis, the finite element model of strengthened bus was built and static calculation was carried out to analyze the intensity of strengthened bus.
在此基础上提出加强方案，建立加强车的有限元模型，进行静态计算分析加强车的强度，同时考察加强方案的效果与不足。
Based on this point, the mechanics and finite element models for casing stress calculation are established.
在考虑这一特点的基础上，建立了套管应力计算的力学及有限元模型。
Based on this point, the mechanics and finite element models for casing stress calculation are established.
在考虑这一特点的基础上，建立了套管应力计算的力学及有限元模型。
应用推荐