The method to analyze the corn combine frame intensity is studied, and the feasibility for design of chassis frame is validated.
研究了玉米联合收割机机架强度分析的方法，验证了底盘机架设计的可行性？
In the paper, an analytic method is described in which a microcomputer is used to analyze dynamic spectrum of display device, and a hardware design of microcomputer interface is discussed specially.
本文提出了一种应用微机对显示器件的动态光谱进行分析的方法，着重于微机接口的硬件设计。
As widely application of FEA in product design and performance, the finite element method is used to analyze the structure of nebulizers based on the piezoelectric coupling theory.
基于有限元方法在产品设计和性能分析中的广泛应用，根据压电耦合有限元分析理论，对雾化器结构进行了深入的分析。
In this paper, we introduce the basic theory and the design of CFA, and analyze the field of CFA by CSM on the basis of method of optimization.
本文基于最优化理论，利用模拟电荷法对一个小型的交叉场天线（CFA）进行了场的数值分析，得到CFA周围的电场、磁场及玻印廷矢量的分布。
Apply the CE principle and method to the analyze of integration technology of the CE design.
运用并行工程的思想和方法，分析并行产品设计的集成技术。
Then we optimize the parameter of the mechanism with an optimizing method, and analyze the result of the optimizing design to meet the needs of the actual production.
用优化方法对该机构的参数进行优化，并对优化设计结果进行分析，以满足实际生产的需要。
Analyze and sort out basic research information of vibrating fluidized bed, put forward design calculation method of the vibrating fluidized bed.
对振动流化床的基础研究资料进行分析和归纳，结合实际选型经验，提出振动流化床的设计计算方法。
It was used structured analysis and business system planning method to expound how to analyze and design Railway Transportation Income Management Information system.
采用结构化分析方法与企业系统规划方法相结合，对铁路运输收入管理信息系统分析和设计的方法进行阐述。
The paper takes Rolling Mill Hydraulic AGC servo cylinder as study object to analyze, compare, and optimize the power match design method.
以轧机液压A GC伺服缸为研究对象，对功率匹配设计方法的进行分析、比较和优化。
This paper introduces how to construct Yangtze River knowledge base based on conception design method, analyze and design conception model, architecture, system flow and system modules.
文章介绍了概念设计方法，分析与设计了长江知识库的概念模型、系统构架、系统流程和系统模块。
Here we analyze and research the theory, the method and its construction design of an electromechanical servo-device of piezoelectric.
本文对其压电伺服机电装置的设计理论、方法和结构设计进行分析研究。
We analyze rejecting periodic interference in PD monitoring on line through cascade IIR digital wave notch filter. The principle and simple design method are proposed and discussed.
在分析用IIR陷波滤波器来抑制局部放电在线监测中周期性干扰的基础上，提出和论述了级联式II R陷波滤波器基本原理及简明设计方法。
This part illustrates the selection of research method, the design of research plan and the sifting and enforcement of sample, that is, choose interviewees, collect materials and analyze materials.
对研究方法的选择、研究方案的设计与样本的筛选、访谈对象的确定、资料的收集与分析进行了说明。
Object oriented method is applied to analyze and describe the typical parts, parametric modeling and model-view-control (MVC) design mode are used to realize the database design and development.
采用面向对象思想对典型结构件进行分析，并基于参数化造型方法和模型视图控制设计模式，实现典型结构件库的设计与开发；
With the method of industry design, I analyze and compare the mechanical systems, make out of the best design project, then lay the foundation of gas valve design from the Angle of complement.
这里应用工业设计思想，从系统的角度出发对天然气阀的机械系统进行了分析比较，得出了最佳设计方案，为天然气阀的设计奠定了基础。
This result improves the efficiency in developing PMSM control system and provides effective method to analyze and design the system.
该研究结果提高了永磁同步电机控制系统开发效率，为永磁同步电机控制系统的分析和设计提供了有效的途径。
The third part put forward the assumption, design of questionnaire, ways of investigate and research, source of data and method of analyze.
第三部分，提出了本文的研究的假设，问卷的设计及调研的方式，数据的来源、数据的分析方法。
At last, we use Object Oriented design program method to analyze and design the service routine of net software dog.
最后，我们使用面向对象程序设计的方式剖析和设计网络加密锁的服务程序。
Using the mechanism of the piezoelectric effect of piezoelectric materials to design a piezoelectric actuator bar master, and analyze its working principle and design method.
利用压电材料的压电效应机理，设计出一种压电主控作动杆件，分析其工作原理和设计方法。
Analyze the technology characteristics of machining center and the necessity of improving traditional technology design method. Introducing an new design method which is suitable for machining center.
分析数控加工中心工艺的特点及改进传统工艺编制方法的必要性。介绍一种适合数控加工中心特点的零件加工工艺的编制方法。
Analysis and design of testing property of software is a basic method to analyze the complexity of the software test and improve testing property of software.
软件的测试性分析与设计是分析软件测试的复杂性，提高软件测试性的基本方法。
The performance based approach is applied the principle and method to analyze the development of fire, and it can find out the relation parameters to design the fire safety system.
性能化消防设计方法是运用消防安全工程学的原理和方法对火灾本身规律进行分析，并找出相关的设计参数的方法。
In this article, I analyze the technologies of the automatic generation of test cases and design a method of an automatic generation of test cases.
本文对自动生成测试用例的相关技术进行了分析，并设计了一种自动生成测试用例的方法。
Due to the complex structure and large diameter of the RC silo of containing coal, it is impossible to analyze it with traditional design method.
大型预应力钢筋混凝土储煤筒仓结构新颖，受力复杂，其直径超出了筒仓规范规定，无法按常规设计方法对其进行结构计算。
To analyze and minimally design the remnant magnetic moment (RMM) for a magnetically suspended reaction flywheel, a method based on the equivalent magnetic dipole model is proposed.
为对磁悬浮反作用飞轮的剩磁矩(RMM)进行分析及最小化设计，提出一种基于等效磁偶极子模型的剩磁矩计算方法。
This paper introduces how to construct Yangtze River knowledge base based on conception design method, analyze and design conception mod...
文章介绍了概念设计方法，分析与设计了长江知识库的概念模型、系统构架、系统流程和系统模块。
Secondly, we introduce the basic principles and security features of ring signatures, analyze and summarize the method of ring signature scheme design;
介绍了环签名的基本原理和安全特性，分析和总结了环签名方案的设计方法；
It is an effective and simple method to design, analyze and optimize the thermal electric system by using this model.
在热循环系统的设计、优化和控制中采用该等效电路模型进行分析是一种简单有效的方法。
It is an effective and simple method to design, analyze and optimize the thermal electric system by using this model.
在热循环系统的设计、优化和控制中采用该等效电路模型进行分析是一种简单有效的方法。
应用推荐