Statical analysis with finite element method is performed to pressurized pressure vessel of titanium alloys.
对型号主体系统中的钛合金气瓶进行有限元静力学分析。
In this paper non-linear analysis with finite element method is used in the study of the plane stress Problems of reinforced concrete members.
本文对钢筋混凝土构件中的平面应力问题，运用有限单元法进行非线性应力分析。
Corrugation problem in the car trunk sealing strip edges is analyzed with the highly non-linear finite element analysis software (MARC). The structure and material is optimized.
本文利用高度非线性有限元分析软件MARC分析轿车行李箱密封条唇边的起皱问题，并对其结构及材料进行了优化。
Based on the geometrical nonlinear finite element (GNFE) theory, a curved quadrilateral isoperimetric element with 8 nodes for initial form analysis of tensile membrane structures is presented.
本文根据几何非线性有限元理论，提出张力膜结构初始形态分析的8结点曲面四边形等参单元。
On this basis, as the permeability of permanent magnetism material is non-linear, two gear wheel's magnetic field is simulated with finite element software, and analysis of the result is carried on.
在此基础上采用有限元分析软件对永磁材料的磁导率为非线性时的一对永磁齿轮传动磁场进行了仿真分析，并对结果进行了分析总结。
With the welding spot fatigue lifetime pre-estimation method, by combination of the finite element analysis and stress calculation, the welding spot fatigue damage under actual load can be calculated.
采用焊点疲劳寿命预估方法，通过有限元分析并结合应力计算，即可计算出实际载荷工况下的焊点疲劳损伤。
According to the trial, we use finite element analysis program to conduct temperature field and thermal stress analysis of the pier under sunshine, and compared the outcome with experimental results.
根据试验采用有限元分析程序，进行日照作用下桥墩的温度场和温度应力分析，并与实验结果进行对比。
Using complex structure finite element analysis, the theoretical prediction conforms with the experimental results very well, the equivalent model is reasonable, and the method is correct.
所建模型经复杂结构有限元方法分析，结果和试验相吻合，表明等效模型是合理的，方法是正确的。
Complete finite element analysis is conducted on pile frame of SYR200 rotary pile drill with the model, which provides guiding reference for the design of pile frames.
使用这种模型对SYR200旋挖钻机桩架进行了整体有限元分析，分析对钻孔机桩架的结构设计有指导意义。
And ANSYS is a large scale general finite element analysis software with abroad application.
而ANSYS是得到广泛应用的大型通用有限元分析软件。
The effects of disuse on trabecular bone structure was simulated, using the bone (re) modeling model with goals of physiological regulation, based on finite element analysis.
本研究将有限元分析与带有调整目标的骨再造方程相结合，模拟废用对松质骨结构的影响。
Based on the results of finite element analysis, it indicates that the analysis has a good precision and gains coincident conclusion with the test.
结果表明有限元分析具有较好的精度，与试验分析有一致的规律。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
In this master thesis, the stress-strain relationships of thin films were measured by nanoindentation combined with dimensional analysis and finite element method.
本文以纳米压痕法结合量纲分析及有限元方法来测量薄膜材料的应力-应变关系。
Under the condition of three kinds of nonlinearity the stress and strain distribution of the road wheel is calculated with finite element analysis software ANSYS.
建立了负重轮的三种三维有限元力学模型，在考虑三重非线性的情况下，用ANSYS有限元分析软件计算了负重轮的应力应变分布。
This paper suggests a finite element analysis method of the multilayer pavement with materials of nonlinearity.
本文提出了一个考虑材料非线性的多层路面应力分析的有限单元法。
By comparing the results obtained from the test and finite element analysis, a very good agreement is found, showing the accuracy and feasibility of the simulation with finite element method.
将有限元模拟结果和试验结果进行了比较，取得了较好的一致，验证了有限元分析的正确性和可行性。
Firstly, this paper introduces the realize process of optimal sensor placement in a plane frame structure with model analysis result using finite element software ANSYS.
首先利用平面框架结构的模型实验，借助有限元软件ANSYS，利用模态分析结果，实现了基于有限元理论的传感器优化布置。
The seismic capacity of the box-shaped joint in the reinforced concrete mega-frame structure system is studied, and the finite element analysis is done with ANSYS .
本文对钢筋混凝土巨型框架结构箱形节点抗震性能进行了试验研究及ANSYS程序有限元分析。
The temperature distribution and stress distribution of blast furnace tuyere with gradient coating have been studied using finite element analysis software, comparing with uniform coating.
采用有限元分析软件研究了梯度涂层高炉风口的温度分布和应力分布，并与均匀涂层进行了比较。
In this paper, the mode character of MWM395 engine block is analyzed with the finite element analysis on the platform of I DEAS.
本文应用有限元法在I - DEAS软件平台上对MWM395柴油机机体进行了模态分析。
The pulsating method is used to test the dome structure of the building under pulsation wind. Measured experimental data are compared with those obtained from the finite element analysis.
在脉动风的作用下，对穹顶结构进行脉动法实测，将实测值与有限元分析结果进行比较。
The method was discussed for how to integrate optimizing and building model with finite element analysis on 3D development and analysis of outer-tooth gear pump through UG design platform.
探讨通过UG设计平台，如何将优化程序、3D模型建立、有限元分析等，有机集成于外啮合齿轮泵齿轮3D设计和分析中去。
The result uniformity of theory and test illustrates the simulation analysis method with finite element can be used to evaluate the reinforcement effect of bridge well and truly.
理论分析与荷载试验结果的一致性表明采用有限元仿真分析方法能够对桥梁加固效果进行准确的评价。
An axisymmetrical finite element analysis is also made, with which the secondary cracking load and the end slip after secondary cracking can be predicted.
又作了轴对称的有限元分析，能估算次生裂缝出现时的荷载以及次生裂缝出现后的端部滑移。
This paper is based on stress analysis of directionally solidified turbine blade with the Finite Element Method. The reliability analysis method with a simple failure model is proposed.
本文在正交异性材料定向结晶涡轮叶片的应力有限元分析的基础上，以一种简单的破坏模式列出了可靠度的计算方法。
ANSYS is a general finite element analysis software. And mesh dividing is an important part of finite element analysis with ANSYS.
ANSYS是一个大型通用的有限元分析软件，网格划分是利用ANSYS进行有限元分析的一个重要环节。
ANSYS is a general finite element analysis software. And mesh dividing is an important part of finite element analysis with ANSYS.
ANSYS是一个大型通用的有限元分析软件，网格划分是利用ANSYS进行有限元分析的一个重要环节。
应用推荐