According to the trial, we use finite element analysis program to conduct temperature field and thermal stress analysis of the pier under sunshine, and compared the outcome with experimental results.
根据试验采用有限元分析程序，进行日照作用下桥墩的温度场和温度应力分析，并与实验结果进行对比。
Possibility and efficiency in the application of this method to large finite element analysis are illustrated by an example of the stress analysis for a section of a cable stayed bridge.
以斜拉桥桥段的应力分析为例，说明在大型有限元分析中采用分阶段计算方法的可能性和有效性。
In order to ensure the reliability of flywheel bolt connection, stress analysis of bolt is performed using contact analysis method.
为了确保飞轮螺栓连接的可靠性，采用接触分析法对螺栓进行了应力分析。
The stress analysis of compound female die is a very complicated problem. Its accurate analysis is the key to solve die longevity.
组合凹模的应力分析是一个非常复杂的问题，对其进行精确分析是解决模具寿命的关键。
The design mainly involves the analysis of the stress, fatigue, thermal ratchet and fracture mechanics, the analysis of flow-induced vibration of the internals and the test verification.
主要涉及的内容包含每个设备部件的应力、疲劳、热棘轮、断裂力学分析和内部构件流致振动分析以及试验验证等。
This paper is studying the problems of blanket fractures arising from seepage consolidation by means of analysis for seepage and deformation and stress analysis.
本文从渗流分析和变形及应力分析讨论了由于渗透固结而发生铺盖裂缝的一些问题。
Simulating the deformation of the steel plate by induction heating in Finite Element Method(FEM), including temperature analysis, stress analysis and deformation analysis.
对钢板感应加热成型进行有限元分析，包括钢板截面的温度分析，应力分析，变形分析等。
Modal analysis and spectrum analysis are applied to research the dynamic characteristics, and the distribution laws of seismic displacements and stress of water retaining section are analyzed.
采用模态分析和反应谱分析的方法，研究坝段两种工况下的自振特性、地震动位移和地震动应力响应的分布规律。
For the construction process of twice prestressed continuous beam, the stress analysis and deformation analysis method during construction stage is provided in this paper.
根据二次预应力连续梁的施工过程，提出了施工阶段的应力和变形分析方法。
This article devotes a simplified stress analysis method to engineering designers for access to performing stress analysis of such structure steel.
该文提供了一种简化的应力分析方法，便于工程设计人员对此类结构的应力进行分析。
The stress analysis of combined die is a very complicated problem, and the exact analysis on it is a key to solve the mould life.
组合凹模的应力分析是一个非常复杂的问题，对其进行精确分析是解决模具寿命的关键。
Using the well-known weighted residual method and finite element procedure, a nonlinear static analysis parallel with effective stress dynamic analysis has been made.
采用著名的加权剩余值法和等参数有限单元法，对坝体进行非线性静力分析和非线性有效应力动力分析。
According to the present formula, this article mainly analysis the different simplified formula to the ultimate stress of external prestressing tendon on the base of theoretical analysis.
根据现有的国内外公式，在理论分析的基础上对既有的多组体外预应力筋极限应力简化计算公式进行验证分析。
In photoelastic stress analysis, the accuracy of analysis can be improved by using fractional isochromatic fringes, so it is very important to study the approach for producing fractional fringes.
在光弹应力分析中，利用分数级条纹可以提高分析精度，于是，产生分数级条纹的方法研究就变得非常重要。
Make use of table analysis, modal analysis of ANSYS finite element software motive force to analyze shake stress analysis of the arch dam.
利用ANSYS有限元软件动力分析中的谱分析、模态分析功能，对拱坝进行地震动应力分析。
X-ray diffraction analysis: analyzing the microstructure of materials, such as phase qualitative, quantitative analysis, stress testing and structural analysis.
射线衍射分析：材料结构的微观分析，如物相定性、定量分析，应力测试，织构分析等。
Introducing heat exchange theory and finite element theory, and deducing the theory that applies finite element method to thermal analysis and thermal stress analysis.
介绍了传热学基本理论知识，有限元方法思想。对有限元法在热分析和热应力分析中的具体应用进行了理论推导。
First, using second constrain, the static state and dynamic analysis applied to the frame of a few thickness plates with FEM modal analysis, distortion, stress, vibration and frequency were gained.
首先在第二种约束方式下，利用有限元模态分析方法对几种不同板厚的机架进行了动、静态分析，得到了机架变形、应力及各阶振型与频率。
The presentation of the method is not only in favor of the adhesive analysis between the contacting faces also offers a new thought for the stress and strain analysis of microgear train.
该计算方法的提出不仅有利于微齿轮接触齿廓间粘附分析，而且对微齿轮应力应变分析提供一种新思路。
The method of stress analysis for pipe with special joints including Y joint and taper - taper joint is indicated through the analysis of vacuum transfer line.
本文通过对减压转油线的应力分析，说明了特殊形状三通管道（包括Y形三通、裤形三通） 的应力分析方法和过程。
The analytical method of stress analysis strain rosette takes much time and Labour in the experimental stress analysis.
在实验应力分析中，用解析法进行应变花的应力分析，既费时又费工。
According to the results of optimizing design, we carried out the static stress analysis and the dynamic stress analysis, and insured the safety of the later assemble processes.
根据优化设计的结果，进行了静态应力分析和动态应力分析，确保了后续装配过程的安全性。
In this paper, by usage of Fast Lagrangian analysis of Continua, analysis the coal seam floor's stress and strain regularity influenced by the facing length and the construct stress.
利用快速拉格朗日分析方法，单因素分析了工作面斜长和构造应力对煤层底板应力应变的影响。
In this thesis, the FEM stress analysis and strength design criteria, multi-axes strength theory and computation, limit load analysis method of arch DAMS are concerned.
本文结合工程实际，在拱坝有限元应力分析方法与强度设计准则、多轴应力强度安全计算、拱坝极限荷载分析理论和方法等方面开展研究。
Using the ANSYS finite element analysis software, thermal analysis and thermal stress analysis of side dam in the strip casting process are carried out to explain the cause of side dam cracking.
采用ANSYS有限元分析软件，分析了侧封板在铸轧过程中温度场和热应力场，由此解释侧封板产生裂纹的原因。
This paper is based on stress analysis of directionally solidified turbine blade with the Finite Element Method. The reliability analysis method with a simple failure model is proposed.
本文在正交异性材料定向结晶涡轮叶片的应力有限元分析的基础上，以一种简单的破坏模式列出了可靠度的计算方法。
This article uses the ANSYS software and analysis design method to make a detailed finite element stress analysis of the head of valve body where placed the quarter rings.
利用ANSYS软件及其分析设计方法，对阀体中腔安装四合环的位置进行了有限元应力分析。
Complex number method for plane stress analysis and plane strain analysis is proposed by means of introducing the concepts of stress complex number and strain complex number in this paper.
通过引入应力复数和应变复数的概念，提出了平面应力分析和平面应变分析的复数方法。
Analysis and comparison between the finite element analysis and experiment results for stress intensity factor, limit load, and flexibility factor were performed.
从应力系数、极限载荷和柔度系数三个方面对有限元计算结果和试验结果进行对比分析。
As the foundation of other analysis in gravity dam's designment, stress and stability analysis is an significant segment.
浆砌石重力坝的应力和稳定性分析是进行其它设计的基础，是整个设计的重要组成部分。
应用推荐