The article calculates the internal forces of cover beams under two different calculation modes by the analysis of finite elements.
该文通过有限元分析计算了两种不同计算模式下的盖梁内力。
Through the comparison of modal shape of floating caliper brake system elements by finite element modal analysis and experiment modal analysis, the validity of finite element model is confirmed.
通过对比浮钳式盘式制动器各零部件的有限元模态分析和试验模态分析所得出的模态阵型,验证了有限元模型的正确性。
Transient response analysis is an important part of finite elements dynamic analysis. Problem scales and velocities of serial softwares are limited on serial computers.
瞬态响应分析是有限元动力分析的重要内容之一,而串行计算机上运行的有限元软件在解题规模和速度上都受到很大限制。
A kind of finite elements for the temperature field analysis in shells is presented in this paper.
构造了一种适用于壳体温度场分析的壳体温度单元。
In this paper, base on the finite elements stress analysis, the mathematic model of the optimum calculation of siphon peeler centrifuge basket is been built.
本文在有限元应力分析的基础上建立了虹吸离心机转鼓整体优化计算的数学模型,并对实际转鼓进行了优化计算。
Using the side frame of the Z8A bogie as an example, this paper introduces the process of fatigue life analysis of a component based on the finite elements technology.
以转8a型转向架侧架为例,介绍了有限元技术应用于构件疲劳寿命分析的过程。
The method of Virtual -coordinate Measuring Machine (Virtual -cmm) based on finite elements analysis is the effective way to predict and compensate dynamic errors in fast probing.
为了预测快速探测过程中产生的动态误差,提出了基于有限元分析的虚拟坐标测量机方法,有限元分析过程的自动执行是其关键组成部分。
Equivalent triangle structure is constructed with hinged bar elements to precisely simulate the effect of wire rope pulley block in the finite element analysis of structure of construction machines.
在工程机械结构有限元分析中,采用铰接杆单元构造等效三角结构,准确的模拟钢绳滑轮组的作用。
An objective analysis method is introduced of finite elements which represent variable grids or regions.
本文介绍了一种网格和区域都可以改变的有限元客观分析方法。
Making an example of finite element analysis for a RC deep beam, the author compares and analyzes the feature, accuracy and reliability of these elements.
然后用一个RC深梁的例子,比较分析了三类单元的特点以及计算结果的精确度和可靠性。
By adopting finite elements method to make the the analysis of stress and strain of axisymmetric rotating shells.
本文用有限元素法对轴对称旋转板、壳进行了应力、应变分析。
Research and discussion on the elementary stiffness matrixes of various plane elements for rc structures' finite element analysis.
研究和讨论了用于RC平面结构分析的各类单元的刚度矩阵。
Three-dimensional rigid-plastic finite elements, elastic finite elements and influential function method for the analysis of deformation of rolls system are combined.
它耦合了三维刚塑性有限元法,弹性有限元法和计算辊系变形的影响函数方法。
The automatic generation algorithm of quadrilateral elements for finite element analysis is studied in detail.
详细研究了有限元模拟中的四边形网格自动生成算法。
A nonlinear finite element method considering the slack of cable elements is proposed in this paper for analysis of spatial cable truss structures.
本文介绍了考虑索单元松弛跟踪的空间索桁结构非线性有限元全过程分析方法。
The finite element dynamic analysis model of the spindle assembly was developed by taking the advantage of the spring-damper elements to simulate the bearing supports.
在对主轴部件分析模型进行研究的基础上,采用弹簧阻尼单元模拟轴承支承的方法,建立了主轴部件动力学分析有限元模型。
In finite element analysis of the reinforced concrete structures, the model of bond-slip between the reinforcement and concrete requires the introduction of special elements.
在有限元计算分析中,钢筋与混凝土间的黏结滑移需要用特殊的单元来进行模拟。
Based on the new contact model, finite element analysis scheme of drill rods in contact with curved boreholes is given using Bernoulli spatial curved beam elements.
利用新的接触模型,采用忽略横向剪切变形的三维空间曲梁单元对三维曲井内钻柱的接触非线性进行了有限元分析,给出了一套计算方法。
In this paper the basic theory of lower bound analysis using finite elements and limit-equilibrium method are introduced briefly.
简要介绍了有限元塑性极限分析下限法、刚体极限平衡法的原理。
Tow researching methods of design of continuous reactive distillation processes are addressed in this paper Analysis of statics and orthogonal collocation on finite elements (OCFE).
介绍连续反应精馏过程设计的两种研究方法:静态分析法和有限元正交搭配ocfe法。
In this article we simplify turbine supercharger impeller as a model, which was jointed of axial symmetry entity elements and plane shell elements, for finite elements analysis (FEA).
利用循环对称条件,将增压器叶轮简化为由实体单元与平面壳体单元组合而成的有限元分析模型。
The automatic generation algorithm of quadrilateral elements for finite element analysis is studied in this paper.
对四边形网格自动生成方法进行了研究。
A real rat's head model during transcranial magnetic stimulation is presented. And the analysis is carried out to calculate the spatial distribution of the electric field by finite elements method.
本文建立了经颅磁刺激中大鼠真实头模型,并利用有限元方法计算了模型中感应电场的空间分布情况。
On the basis of appraising the existing analytical methods of slope stability, the plastic limit analysis using finite elements is put forward to analyze the slope stability.
在评价现有边坡稳定分析方法的基础上,提出了边坡稳定的有限元塑性极限分析方法。
The finite element analysis of three-dimensional steady-state convection-diffusion equation is given by using 4-node tetrahedral elements and 8-node hexahedral elements.
采用四结点四面体单元和八结点六面体等参数单元进行三维定常对流扩散方程的有限元分析。
The high order triangular elements play an important role in finite element analysis. A new method for plotting colored patterns of high order triangular elements is presented in this paper.
高次三角形单元在有限元计算中起着重要作用,本文提出一种画高次三角形单元云图的新方法。
The high order triangular elements play an important role in finite element analysis. A new method for plotting colored patterns of high order triangular elements is presented in this paper.
高次三角形单元在有限元计算中起着重要作用,本文提出一种画高次三角形单元云图的新方法。
应用推荐